linux-kernel - Re: [PATCH v2 01/11] pstore/blk: new support logger for block devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <202003180944.3B36871@keescook>
Date:   Wed, 18 Mar 2020 10:23:55 -0700
From:   Kees Cook <keescook@...omium.org>
To:     liaoweixiong <liaoweixiong@...winnertech.com>
Cc:     Anton Vorontsov <anton@...msg.org>,
        Colin Cross <ccross@...roid.com>,
        Tony Luck <tony.luck@...el.com>,
        Jonathan Corbet <corbet@....net>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Richard Weinberger <richard@....at>,
        Vignesh Raghavendra <vigneshr@...com>,
        Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Rob Herring <robh@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jonathan Cameron <Jonathan.Cameron@...wei.com>,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-mtd@...ts.infradead.org
Subject: Re: [PATCH v2 01/11] pstore/blk: new support logger for block devices

On Thu, Feb 27, 2020 at 04:21:51PM +0800, liaoweixiong wrote:
> On 2020/2/26 AM 8:52, Kees Cook wrote:
> > On Fri, Feb 07, 2020 at 08:25:45PM +0800, WeiXiong Liao wrote:
> >> +obj-$(CONFIG_PSTORE_BLK) += pstore_blk.o
> >> +pstore_blk-y += blkzone.o
> > 
> > Why this dance with files? I would just expect:
> > 
> > obj-$(CONFIG_PSTORE_BLK)     += blkzone.o
> > 
> 
> This makes the built module named blkzone.ko rather than
> pstore_blk.ko.

You can just do a regular build rule:

obj-$(CONFIG_PSTORE_BLK) += blkzone.o

> >> +#define BLK_SIG (0x43474244) /* DBGC */
> > 
> > I was going to suggest extracting PERSISTENT_RAM_SIG, renaming it and
> > using it in here and in ram_core.c, but then I realize they're not
> > marking the same structure. How about choosing a new magic sig for the
> > blkzone data header?
> > 
> 
> That's OK to me. I don't know if there is a rule to get a new magic?
> In addition, all members of this structure are the same as
> struct persistent_ram_buffer after patch 2. Maybe it's a good idea to
> extract it
> if you want to merge ramoops and pstore/blk.

Okay, let's leave it as-is for now.

> >> +	uint32_t sig;
> >> +	atomic_t datalen;
> >> +	uint8_t data[];
> >> +};
> >> +
> >> +/**
> >> + * struct blkz_dmesg_header: dmesg information
> > 
> > This is the on-disk structure also?
> > 
> Yes. The structure blkz_buffer is a generic header for all recorder
> zone, and the
> structure blkz_dmesg_header is a header for dmesg, saved in
> blkz_buffer->data.
> The dmesg recorder use it to save it's specific attributes.

Okay, can you add comments to distinguish the on-disk structures from
the in-memory, etc?

> >> +#define DMESG_HEADER_MAGIC 0x4dfc3ae5
> > 
> > How was this magic chosen?
> 
> It's a random number. Maybe should I chose a meaningful magic?

That's fine; just add a comment to say so.

> >> + * @dirty:
> >> + *	mark whether the data in @buffer are dirty (not flush to storage yet)
> >> + */
> > 
> > Thank you for the kerndoc! :) Is it linked to from any .rst files?
> > 
> 
> I don't get your words. There is a document on the 6th patch. I don't know
> whether it is what you want?

Patch 6 is excellent; I think you might want to add references back to
these kern-doc structures using the ".. kernel-doc::
fs/pstore/blkzone.c" syntax:
https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#including-kernel-doc-comments

> >> +static int blkz_zone_write(struct blkz_zone *zone,
> >> +		enum blkz_flush_mode flush_mode, const char *buf,
> >> +		size_t len, unsigned long off)
> >> +{
> >> +	struct blkz_info *info = blkz_cxt.bzinfo;
> >> +	ssize_t wcnt = 0;
> >> +	ssize_t (*writeop)(const char *buf, size_t bytes, loff_t pos);
> >> +	size_t wlen;
> >> +
> >> +	if (off > zone->buffer_size)
> >> +		return -EINVAL;
> >> +	wlen = min_t(size_t, len, zone->buffer_size - off);
> >> +	if (buf && wlen) {
> >> +		memcpy(zone->buffer->data + off, buf, wlen);
> >> +		atomic_set(&zone->buffer->datalen, wlen + off);
> >> +	}
> > 
> > If you're expecting concurrent writers (use of atomic_set(), I would
> > expect the whole write to be locked instead. (i.e. what happens if
> > multiple callers call blkz_zone_write()?)
> > 
> 
> I don't agree with it. The datalen will be updated everywhere. It's useless
> to lock here.

But there could be multiple writers; locking should be needed.

> One more things. During the analysis, I found another problem.
> Removing old files will cause new logs to be lost. Take console recorder as
> am example. After new rebooting, new logs are saved to buf while old
> logs are
> saved to old_buf. If we remove old file at that time, not only old_buf
> is freed, but
> also length of buf for new data is reset to zero. The ramoops may also
> has this
> problem.

Hmm. I'll need to double-check this. It's possible the call to
persistent_ram_zap() in ramoops_pstore_erase() is not needed.

> >> +static int blkz_recover_dmesg_data(struct blkz_context *cxt)
> > 
> > What does "recover" mean in this context? Is this "read from storage"?
> 
> Yes. "recover" means reading data back from storage.

Okay. Please add some comments here. I would think of it more as "read"
or "load". When I think of "recover" I think of "finding something that
was lost". But the name isn't important as long as there is a comment
somewhere about what it's doing.

-Kees

-- 
Kees Cook