| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4d93b050-6185-0d39-c89a-ac7fb6fc7780@arm.com>
Date: Thu, 19 Mar 2020 16:29:06 +0000
From: Robin Murphy <robin.murphy@....com>
To: Katsuhiro Suzuki <katsuhiro@...suster.net>,
Heiko Stübner <heiko@...ech.de>
Cc: linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] ARM: dts: rockchip: move uart2 pinctrl settings to each
dts for rk3288
On 2020-03-19 3:58 pm, Katsuhiro Suzuki wrote:
> Hello Heiko,
>
> On 2020/03/20 0:25, Heiko Stübner wrote:
>> Hi,
>>
>> Am Donnerstag, 19. März 2020, 16:13:39 CET schrieb Katsuhiro Suzuki:
>>> This patch removes conflicted pinctrl settings uart2 and pwm 2/3
>>> from common rk3288.dtsi and moves exist uart2 pinctrl settings
>>> into each rk3288*.dts files.
>>>
>>> - pwm2_pin : use GPIO7_C6
>>> - pwm3_pin : use GPIO7_C7
>>> - uart2_xfer: use GPIO7_C6, GPIO7_C7
>>
>> Board files only ever get to enable either pwm2/3 or uart2,
>> not both at once - so I'm not sure where you see conflicts.
>>
>
> At first, I think so too. But I've saw this message when booting.
>
> ----------
> [ 2.435504] rockchip-pinctrl pinctrl: pin gpio7-22 already requested
> by ff680020.pwm; cannot claim for ff690000.serial
> [ 2.447506] rockchip-pinctrl pinctrl: pin-238 (ff690000.serial)
> status -22
> [ 2.455198] rockchip-pinctrl pinctrl: could not request pin 238
> (gpio7-22) from group uart2-xfer on device rockchip-pinctrl
> ----------
>
> And it seems that uart2(ttyS2) is not working correctly.
>
> ----------
> # cat /dev/ttyS2
> cat: /dev/ttyS2: Input/output error
> ----------
>
> I'm using newest linux-next, make defconfig and CONFIG_MODULES = n setting
> with TinkerBoard. Can I resolve this issue in other ways?
Do you perhaps have a DT overlay or bootloader script enabling pwm2?
(try `cat /sys/firmware/devicetree/base/pwm@...80020/status` for a
sanity check). FWIW I don't recall ever seeing this on my RK3288 box.
(or of course maybe there's just some pinctrl bug in -next that's
claiming configs for disabled devices)
Robin.
>
> Best Regards,
> Katsuhiro Suzuki
>
>
>> And of course there are alternative pins to use, if you need uart2
>> you need both pins in uart-pinmux and if you need either as pwm, then
>> the board by design just can't use them as uart2.
>>
>> So pin setting should stay where they are, as there really is no
>> conflict.
>>
>>
>> Heiko
>>
>>
>>
>>> Currently uart2 rk3288 user is the following:
>>>
>>> - rk3288-evb.dtsi:&uart2 {
>>> - rk3288-firefly-reload.dts:&uart2 {
>>> - rk3288-firefly.dtsi:&uart2 {
>>> - rk3288-miqi.dts:&uart2 {
>>> - rk3288-phycore-rdk.dts:&uart2 {
>>> - rk3288-popmetal.dts:&uart2 {
>>> - rk3288-r89.dts:&uart2 {
>>> - rk3288-rock2-square.dts:&uart2 {
>>> - rk3288-tinker.dtsi:&uart2 {
>>> - rk3288-veyron.dtsi:&uart2 {
>>> - rk3288-vyasa.dts:&uart2 {
>>>
>>> And no one is using pwm2 nor pwm3.
>>>
>>> Signed-off-by: Katsuhiro Suzuki <katsuhiro@...suster.net>
>>> ---
>>> arch/arm/boot/dts/rk3288-evb.dtsi | 2 ++
>>> arch/arm/boot/dts/rk3288-firefly-reload.dts | 2 ++
>>> arch/arm/boot/dts/rk3288-firefly.dtsi | 2 ++
>>> arch/arm/boot/dts/rk3288-miqi.dts | 2 ++
>>> arch/arm/boot/dts/rk3288-phycore-rdk.dts | 2 ++
>>> arch/arm/boot/dts/rk3288-popmetal.dts | 2 ++
>>> arch/arm/boot/dts/rk3288-r89.dts | 2 ++
>>> arch/arm/boot/dts/rk3288-rock2-square.dts | 2 ++
>>> arch/arm/boot/dts/rk3288-tinker.dtsi | 2 ++
>>> arch/arm/boot/dts/rk3288-veyron.dtsi | 2 ++
>>> arch/arm/boot/dts/rk3288-vyasa.dts | 2 ++
>>> arch/arm/boot/dts/rk3288.dtsi | 6 ------
>>> 12 files changed, 22 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi
>>> b/arch/arm/boot/dts/rk3288-evb.dtsi
>>> index 018802df4c0e..74091f831ecf 100644
>>> --- a/arch/arm/boot/dts/rk3288-evb.dtsi
>>> +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
>>> @@ -285,6 +285,8 @@ &uart1 {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts
>>> b/arch/arm/boot/dts/rk3288-firefly-reload.dts
>>> index 8c38bda21a7c..b0c976c8e35b 100644
>>> --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
>>> +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
>>> @@ -283,6 +283,8 @@ &uart1 {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi
>>> b/arch/arm/boot/dts/rk3288-firefly.dtsi
>>> index 5e0a19004e46..1632cc083c12 100644
>>> --- a/arch/arm/boot/dts/rk3288-firefly.dtsi
>>> +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
>>> @@ -532,6 +532,8 @@ &uart1 {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-miqi.dts
>>> b/arch/arm/boot/dts/rk3288-miqi.dts
>>> index c41d012c8850..2c0ed37fde80 100644
>>> --- a/arch/arm/boot/dts/rk3288-miqi.dts
>>> +++ b/arch/arm/boot/dts/rk3288-miqi.dts
>>> @@ -379,6 +379,8 @@ &tsadc {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
>>> b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
>>> index 1e33859de484..6532c1ac43cd 100644
>>> --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
>>> +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
>>> @@ -244,6 +244,8 @@ &uart0 {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts
>>> b/arch/arm/boot/dts/rk3288-popmetal.dts
>>> index 6a51940398b5..f18306bd9e6e 100644
>>> --- a/arch/arm/boot/dts/rk3288-popmetal.dts
>>> +++ b/arch/arm/boot/dts/rk3288-popmetal.dts
>>> @@ -481,6 +481,8 @@ &uart1 {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-r89.dts
>>> b/arch/arm/boot/dts/rk3288-r89.dts
>>> index a258c7ae5329..02d2f5cfe201 100644
>>> --- a/arch/arm/boot/dts/rk3288-r89.dts
>>> +++ b/arch/arm/boot/dts/rk3288-r89.dts
>>> @@ -340,6 +340,8 @@ &uart1 {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts
>>> b/arch/arm/boot/dts/rk3288-rock2-square.dts
>>> index cdcdc921ee09..a44290e882be 100644
>>> --- a/arch/arm/boot/dts/rk3288-rock2-square.dts
>>> +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
>>> @@ -264,6 +264,8 @@ &spdif {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi
>>> b/arch/arm/boot/dts/rk3288-tinker.dtsi
>>> index acfaa12ec239..0327119f71b4 100644
>>> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
>>> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
>>> @@ -500,6 +500,8 @@ &uart1 {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi
>>> b/arch/arm/boot/dts/rk3288-veyron.dtsi
>>> index 54a6838d73f5..baa44d00e49a 100644
>>> --- a/arch/arm/boot/dts/rk3288-veyron.dtsi
>>> +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
>>> @@ -412,6 +412,8 @@ &uart1 {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts
>>> b/arch/arm/boot/dts/rk3288-vyasa.dts
>>> index 385dd59393e1..aa50cdc7f839 100644
>>> --- a/arch/arm/boot/dts/rk3288-vyasa.dts
>>> +++ b/arch/arm/boot/dts/rk3288-vyasa.dts
>>> @@ -398,6 +398,8 @@ &tsadc {
>>> };
>>> &uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_xfer>;
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/rk3288.dtsi
>>> b/arch/arm/boot/dts/rk3288.dtsi
>>> index 0cd88774db95..4c1f8cabb5eb 100644
>>> --- a/arch/arm/boot/dts/rk3288.dtsi
>>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>>> @@ -450,8 +450,6 @@ uart2: serial@...90000 {
>>> reg-io-width = <4>;
>>> clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
>>> clock-names = "baudclk", "apb_pclk";
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&uart2_xfer>;
>>> status = "disabled";
>>> };
>>> @@ -706,8 +704,6 @@ pwm2: pwm@...80020 {
>>> compatible = "rockchip,rk3288-pwm";
>>> reg = <0x0 0xff680020 0x0 0x10>;
>>> #pwm-cells = <3>;
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pwm2_pin>;
>>> clocks = <&cru PCLK_RKPWM>;
>>> clock-names = "pwm";
>>> status = "disabled";
>>> @@ -717,8 +713,6 @@ pwm3: pwm@...80030 {
>>> compatible = "rockchip,rk3288-pwm";
>>> reg = <0x0 0xff680030 0x0 0x10>;
>>> #pwm-cells = <3>;
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pwm3_pin>;
>>> clocks = <&cru PCLK_RKPWM>;
>>> clock-names = "pwm";
>>> status = "disabled";
>>>
>>
>>
>>
>>
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists