linux-kernel - Re: graph connection to node is not bidirectional kernel-5.6.0-rc6

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 19 Mar 2020 11:06:15 -0600
From:   Rob Herring <robh@...nel.org>
To:     Vinay Simha B N <simhavcs@...il.com>
Cc:     "open list:DRM DRIVER FOR MSM ADRENO GPU" 
        <freedreno@...ts.freedesktop.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>,
        Andrzej Hajda <a.hajda@...sung.com>,
        Laurent Pinchart <Laurent.pinchart@...asonboard.com>
Subject: Re: graph connection to node is not bidirectional kernel-5.6.0-rc6

On Thu, Mar 19, 2020 at 9:56 AM Vinay Simha B N <simhavcs@...il.com> wrote:
>
> On Thu, Mar 19, 2020 at 9:16 PM Rob Herring <robh@...nel.org> wrote:
> >
> > On Thu, Mar 19, 2020 at 1:31 AM Vinay Simha B N <simhavcs@...il.com> wrote:
> > >
> > > hi,
> > >
> > > I am getting the endpoint' is not bidirectional(d2l_in, dsi0_out)
> > > warning in compilation, built boot image works on qcom apq8016-ifc6309
> > > board with the dsi->bridge->lvds panel.
> > > Because of this warning i cannot create a .yaml documentation examples.
> > > Please suggest.
> > >
> > > tc_bridge: bridge@f {
> >
> >              ^^^^^^^^
> >
> > > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:253.28-255.9: Warning
> > > (graph_endpoint): /soc/i2c@...8000/bridge@...ports/port@...ndpoint:
> >
> >                                      ^^^^^^^^^
> >
> > Looks like you have 2 different bridges.
> >
> i had two bridges, if we disable one bridge also we get the warning
>
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:333.53-335.35: Warning
> (graph_endpoint): /soc/auo,b101xtn01/port/endpoint: graph connection
> to node '/soc/i2c@...8000/bridge@...orts/port@...ndpoint' is not
> bidirectional

You can't just disable nodes. To switch which bridge is enabled, you
already have to modify remote-endpoint at the other end. So the
requirement is you have to modify both 'remote-endpoint' properties
(or really all 3).

The other options is if you want both connections described, then you
need 2 'endpoint' nodes to connect both bridges.