[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200319190229.32200-3-digetx@gmail.com>
Date: Thu, 19 Mar 2020 22:02:19 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Peter De Schrijver <pdeschrijver@...dia.com>,
Prashant Gaikwad <pgaikwad@...dia.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Peter Geis <pgwipeout@...il.com>,
Nicolas Chauvet <kwizart@...il.com>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Michał Mirosław <mirq-linux@...e.qmqm.pl>,
Jasper Korten <jja2000@...il.com>,
David Heidelberg <david@...t.cz>
Cc: linux-pm@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v8 02/12] clk: tegra: pll: Add pre/post rate-change hooks
There is a need to temporarily re-parent CCLK away from PLLX if PLLX's
rate is about to change. The newly introduced PLL pre/post rate-change
hooks allow to handle such case.
Acked-by: Peter De Schrijver <pdeschrijver@...dia.com>
Tested-by: Peter Geis <pgwipeout@...il.com>
Tested-by: Marcel Ziswiler <marcel@...wiler.com>
Tested-by: Jasper Korten <jja2000@...il.com>
Tested-by: David Heidelberg <david@...t.cz>
Tested-by: Nicolas Chauvet <kwizart@...il.com>
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
drivers/clk/tegra/clk-pll.c | 12 +++++++++++-
drivers/clk/tegra/clk.h | 6 ++++++
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 531c2b3d814e..0b212cf2e794 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -744,13 +744,19 @@ static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
state = clk_pll_is_enabled(hw);
+ if (state && pll->params->pre_rate_change) {
+ ret = pll->params->pre_rate_change();
+ if (WARN_ON(ret))
+ return ret;
+ }
+
_get_pll_mnp(pll, &old_cfg);
if (state && pll->params->defaults_set && pll->params->dyn_ramp &&
(cfg->m == old_cfg.m) && (cfg->p == old_cfg.p)) {
ret = pll->params->dyn_ramp(pll, cfg);
if (!ret)
- return 0;
+ goto done;
}
if (state) {
@@ -772,6 +778,10 @@ static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
pll_clk_start_ss(pll);
}
+done:
+ if (state && pll->params->post_rate_change)
+ pll->params->post_rate_change();
+
return ret;
}
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 412d4b47ecfd..e67c19eadb19 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -266,6 +266,10 @@ struct tegra_clk_pll;
* disabled.
* @dyn_ramp: Callback which can be used to define a custom
* dynamic ramp function for a given PLL.
+ * @pre_rate_change: Callback which is invoked just before changing
+ * PLL's rate.
+ * @post_rate_change: Callback which is invoked right after changing
+ * PLL's rate.
*
* Flags:
* TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
@@ -342,6 +346,8 @@ struct tegra_clk_pll_params {
void (*set_defaults)(struct tegra_clk_pll *pll);
int (*dyn_ramp)(struct tegra_clk_pll *pll,
struct tegra_clk_pll_freq_table *cfg);
+ int (*pre_rate_change)(void);
+ void (*post_rate_change)(void);
};
#define TEGRA_PLL_USE_LOCK BIT(0)
--
2.25.1
Powered by blists - more mailing lists