| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <958c3ce0-58e1-2422-c9c3-cce16d80084c@samsung.com>
Date: Thu, 19 Mar 2020 12:41:55 +0100
From: Marek Szyprowski <m.szyprowski@...sung.com>
To: Paul Cercueil <paul@...pouillou.net>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: Stenkin Evgeniy <stenkinevgeniy@...il.com>,
Jonas Heinrich <onny@...ject-insanity.org>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] ARM: DTS: Add devicetree file for the Galaxy S2
Hi Paul,
A few more comments I've missed during the first review. Sorry for
delaying your work.
On 2020-03-18 23:25, Paul Cercueil wrote:
> From: Stenkin Evgeniy <stenkinevgeniy@...il.com>
>
> Add devicetree file for the Exynos 4210 based Galaxy S2 (i9100 version).
>
> Signed-off-by: Stenkin Evgeniy <stenkinevgeniy@...il.com>
> Signed-off-by: Paul Cercueil <paul@...pouillou.net>
> ---
>
> Notes:
> v2: - Change i9100 to GT-I9100
> - Remove redundant description in header
> - Add chosen node with stdout-path
> - Rename regulator nodes since there was no regulator-2
> - Rename i2c-gpio-3 to i2c-gpio
> - Use IRQ_TYPE_EDGE_FALLING instead of hardcoded '2'
> - Remove spi-cpol, spi-cpha as they glitch the LCD panel
> - Make CS gpio active-low
> - Update ehci node to add 'phys' instead of ports
> - Remove duplicated ehci node
> - Reorder nodes to appear in alphabetical order
> - Remove useless newlines
> - Remove regulator provided to touchscreen node since it does not expect any
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos4210-i9100.dts | 773 +++++++++++++++++++++++++
> 2 files changed, 774 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos4210-i9100.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d6546d2676b9..522436d30690 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \
> exynos3250-monk.dtb \
> exynos3250-rinato.dtb
> dtb-$(CONFIG_ARCH_EXYNOS4) += \
> + exynos4210-i9100.dtb \
> exynos4210-origen.dtb \
> exynos4210-smdkv310.dtb \
> exynos4210-trats.dtb \
> diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
> new file mode 100644
> index 000000000000..7e476871c178
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4210-i9100.dts
> @@ -0,0 +1,773 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@...il.com>
> + * Copyright (c) 2020 Paul Cercueil <paul@...pouillou.net>
> + */
> +
> +/dts-v1/;
> +#include "exynos4210.dtsi"
> +#include "exynos4412-ppmu-common.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +
> +/ {
> + model = "Samsung Galaxy S2 (GT-I9100)";
> + compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
> +
> + memory@...00000 {
> + device_type = "memory";
> + reg = <0x40000000 0x40000000>;
> + };
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + vemmc_reg: regulator-0 {
> + compatible = "regulator-fixed";
> + regulator-name = "VMEM_VDD_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + tsp_reg: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "TSP_FIXED_VOLTAGES";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <70000>;
> + enable-active-high;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + cam_af_28v_reg: regulator-2 {
> + compatible = "regulator-fixed";
> + regulator-name = "8M_AF_2.8V_EN";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + cam_io_en_reg: regulator-3 {
> + compatible = "regulator-fixed";
> + regulator-name = "CAM_IO_EN";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + cam_io_12v_reg: regulator-4 {
> + compatible = "regulator-fixed";
> + regulator-name = "8M_1.2V_EN";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + vt_core_15v_reg: regulator-5 {
> + compatible = "regulator-fixed";
> + regulator-name = "VT_CORE_1.5V";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + vol-down {
> + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + label = "volume down";
> + debounce-interval = <10>;
> + };
> +
> + vol-up {
> + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + label = "volume up";
> + debounce-interval = <10>;
> + };
> +
> + power {
> + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "power";
> + debounce-interval = <10>;
> + wakeup-source;
> + };
> +
> + ok {
> + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_OK>;
> + label = "ok";
> + debounce-interval = <10>;
> + };
> + };
> +
> + wlan_pwrseq: sdhci3-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + i2c_max17042_fuel: i2c-gpio {
> + compatible = "i2c-gpio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sda-gpios = <&gpy4 0 GPIO_ACTIVE_HIGH>;
> + scl-gpios = <&gpy4 1 GPIO_ACTIVE_HIGH>;
> + i2c-gpio,delay-us = <5>;
> +
> + battery@36 {
> + compatible = "maxim,max17042";
> +
> + interrupt-parent = <&gpx2>;
> + interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> +
> + pinctrl-0 = <&max17042_fuel_irq>;
> + pinctrl-names = "default";
> +
> + reg = <0x36>;
> + maxim,over-heat-temp = <700>;
> + maxim,over-volt = <4500>;
> + };
> + };
> +
> + spi-lcd {
> + compatible = "spi-gpio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + num-chipselects = <1>;
> + cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
> + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
> + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
> +
> + lcd@0 {
> + compatible = "samsung,ld9040";
> + reg = <0>;
> +
> + spi-max-frequency = <1200000>;
> +
> + vdd3-supply = <&vmipi_reg>;
> + vci-supply = <&vcclcd_reg>;
> +
> + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
> + power-on-delay = <10>;
> + reset-delay = <10>;
> +
> + panel-width-mm = <90>;
> + panel-height-mm = <154>;
> +
> + display-timings {
> + timing {
> + clock-frequency = <23492370>;
> + hactive = <480>;
> + vactive = <800>;
> + hback-porch = <16>;
> + hfront-porch = <16>;
> + vback-porch = <2>;
> + vfront-porch = <28>;
> + hsync-len = <2>;
> + vsync-len = <1>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <0>;
> + pixelclk-active = <0>;
> + };
> + };
> +
> + port {
> + lcd_ep: endpoint {
> + remote-endpoint = <&fimd_dpi_ep>;
> + };
> + };
> + };
> + };
> +
> + fixed-rate-clocks {
> + xxti {
> + compatible = "samsung,clock-xxti";
> + clock-frequency = <0>;
> + };
> +
> + xusbxti {
> + compatible = "samsung,clock-xusbxti";
> + clock-frequency = <24000000>;
> + };
> + };
> +
> + thermal-zones {
> + cpu_thermal: cpu-thermal {
> + cooling-maps {
> + map0 {
> + /* Corresponds to 800MHz */
> + cooling-device = <&cpu0 2 2>;
> + };
> + map1 {
> + /* Corresponds to 200MHz */
> + cooling-device = <&cpu0 4 4>;
> + };
> + };
> + };
> + };
> +};
> +
> +&camera {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&varm_breg>;
> +};
> +
> +&ehci {
> + status = "okay";
> +
> + phys = <&exynos_usbphy 1>;
> + phy-names = "host";
> +};
> +
> +&exynos_usbphy {
> + status = "okay";
> +
> + vbus-supply = <&safe1_sreg>;
> +};
> +
> +&fimc_0 {
> + status = "okay";
> +
> + assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> + assigned-clock-rates = <0>, <160000000>;
> +};
> +
> +&fimc_1 {
> + status = "okay";
> +
> + assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> + assigned-clock-rates = <0>, <160000000>;
> +};
> +
> +&fimc_2 {
> + status = "okay";
> +
> + assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> + assigned-clock-rates = <0>, <160000000>;
> +};
> +
> +&fimc_3 {
> + status = "okay";
> +
> + assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> + assigned-clock-rates = <0>, <160000000>;
> +};
> +
> +&fimd {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + samsung,invert-vden;
> + samsung,invert-vclk;
> +
> + pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
> + pinctrl-names = "default";
> +
> + port@3 {
> + reg = <3>;
> +
> + fimd_dpi_ep: endpoint {
> + remote-endpoint = <&lcd_ep>;
> + };
> + };
> +};
> +
> +&gpu {
> + status = "okay";
> +
> + mali-supply = <&vg3d_breg>;
> + regulator-microvolt-offset = <50000>;
> + regulator-microsecs-delay = <50>;
> +};
> +
> +&hsotg {
> + status = "okay";
> +
> + dr_mode = "otg";
> + vusb_d-supply = <&vusb_reg>;
> + vusb_a-supply = <&vusbdac_reg>;
> +};
> +
> +&i2c_3 {
> + status = "okay";
> +
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-slave-addr = <0x10>;
> + samsung,i2c-max-bus-freq = <100000>;
> +
> + pinctrl-0 = <&i2c3_bus>;
> + pinctrl-names = "default";
> +
> + mxt224-touchscreen@4a {
> + compatible = "atmel,maxtouch";
> + reg = <0x4a>;
> +
> + interrupt-parent = <&gpx0>;
> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
> + };
> +};
> +
> +&i2c_5 {
> + status = "okay";
> +
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-slave-addr = <0x10>;
> + samsung,i2c-max-bus-freq = <100000>;
> +
> + pinctrl-0 = <&i2c5_bus>;
> + pinctrl-names = "default";
> +
> + max8997_pmic@66 {
> + compatible = "maxim,max8997-pmic";
> + reg = <0x66>;
> +
> + interrupts-extended = <&gpx0 7 0>, <&gpx2 3 2>;
Please use flags from include/dt-bindings/interrupt-controller/irq.h for
the last argument. One day I would also like to get rid of IRQ_TYPE_NONE
in favor of proper values, but this needs a lot of testing and digging
in the datasheets.
> + interrupt-parent = <&gpx0>;
> + interrupts = <7 IRQ_TYPE_NONE>;
The above 2 lines are duplicating the data from interrupts-extended
property. I also need to remove them from exynos4210-trats.dts.
> +
> + otg_en-gpios = <&gpx3 3 0>;
> + usb_sel-gpios = <&gpl0 6 0>;
Those GPIOs are not defined yet by MAX8997 bindings, nor handled by the
driver.
> +
> + max8997,pmic-buck1-uses-gpio-dvs;
> + max8997,pmic-buck2-uses-gpio-dvs;
> + max8997,pmic-buck5-uses-gpio-dvs;
> +
> + max8997,pmic-ignore-gpiodvs-side-effect;
> + max8997,pmic-buck125-default-dvs-idx = <0>;
> +
> + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
> + <&gpx0 6 GPIO_ACTIVE_HIGH>,
> + <&gpl0 0 GPIO_ACTIVE_HIGH>;
> +
> + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
> + <1250000>, <1200000>,
> + <1150000>, <1100000>,
> + <1000000>, <950000>;
> +
> + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
> + <950000>, <900000>,
> + <1100000>, <1000000>,
> + <950000>, <900000>;
> +
> + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>;
> +
> + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
> + pinctrl-names = "default";
> +
> + regulators {
> + vadc_reg: LDO1 {
> + regulator-name = "VADC_3.3V_C210";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> +
> + };
> + valive_reg: LDO2 {
> + regulator-name = "VALIVE_1.1V_C210";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> +
> + };
> +
> + vusb_reg: LDO3 {
> + regulator-name = "VUSB_1.1V_C210";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + };
> +
> + vmipi_reg: LDO4 {
> + regulator-name = "VMIPI_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + vhsic_reg: LDO5 {
> + regulator-name = "VHSIC_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + vpda_reg: LDO6 {
> + regulator-name = "VCC_1.8V_PDA";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + vcam_reg: LDO7 {
> + regulator-name = "CAM_ISP_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vusbdac_reg: LDO8 {
> + regulator-name = "VUSB+VDAC_3.3V_C210";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vccpda_reg: LDO9 {
> + regulator-name = "VCC_2.8V_PDA";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + vtouch_reg: LDO11 {
> + regulator-name = "TOUCH_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + vpll_reg: LDO10 {
> + regulator-name = "VPLL_1.1V";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + vtcam_reg: LDO12 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcclcd_reg: LDO13 {
> + regulator-name = "VCC_3.0V_LCD";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + vmotor_reg: LDO14 {
> + regulator-name = "VCC_2.8V_MOTOR";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + vled_reg: LDO15 {
> + regulator-name = "LED_A_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + camsensor_reg: LDO16 {
> + regulator-name = "CAM_SENSOR_IO_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vtf_reg: LDO17 {
> + regulator-name = "VTF_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + vtouchled_reg: LDO18 {
> + regulator-name = "TOUCH_LED_3.3V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vddq_reg: LDO21 {
> + regulator-name = "VDDQ_M1M2_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + varm_breg: BUCK1 {
> + //regulator-name = "VARM_1.2V_C210";
> + regulator-name = "vdd_arm";
We can use the proper regulator name as the one from schematic -
VARM_1.2V_C210. The 'vdd_arm' hack is no longer needed once the
regulator is assigned to the CPU node. Again, this has to be fixed in
the other Exynos DTS's too.
> + regulator-min-microvolt = <65000>;
> + regulator-max-microvolt = <2225000>;
> + regulator-always-on;
> + };
> +
> + vint_breg: BUCK2 {
> + regulator-name = "VINT_1.1V_C210";
> + regulator-min-microvolt = <65000>;
> + regulator-max-microvolt = <2225000>;
> + regulator-always-on;
> + };
> +
> + vg3d_breg: BUCK3 {
> + regulator-name = "G3D_1.1V";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + camisp_breg: BUCK4 {
> + regulator-name = "CAM_ISP_CORE_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + vmem_breg: BUCK5 {
> + regulator-name = "VMEM_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + vccsub_breg: BUCK7 {
> + regulator-name = "VCC_SUB_2.0V";
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + };
> +
> + safe1_sreg: ESAFEOUT1 {
> + regulator-name = "SAFEOUT1";
> + };
> +
> + safe2_sreg: ESAFEOUT2 {
> + regulator-name = "SAFEOUT2";
> + regulator-boot-on;
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <60000>;
> + regulator-max-microamp = <2580000>;
> + regulator-always-on;
> + };
> +
> + chargercv_reg: CHARGER_CV {
> + regulator-name = "CHARGER_CV";
> + regulator-min-microvolt = <3800000>;
> + regulator-max-microvolt = <4100000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&i2c_7 {
> + status = "okay";
> +
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-slave-addr = <0x10>;
> + samsung,i2c-max-bus-freq = <400000>;
> +
> + pinctrl-0 = <&i2c7_bus>;
> + pinctrl-names = "default";
> +
> + ak8975@c {
> + compatible = "asahi-kasei,ak8975";
> + reg = <0x0c>;
> +
> + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&pinctrl_0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&sleep0>;
> +
> + sleep0: sleep-states {
> + gpa0-0 {
> + samsung,pins = "gpa0-0";
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + gpa0-1 {
> + samsung,pins = "gpa0-1";
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + gpa0-2 {
> + samsung,pins = "gpa0-2";
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + gpa0-3 {
> + samsung,pins = "gpa0-3";
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> + };
> +};
> +
> +&pinctrl_1 {
> + mhl_int: mhl-int {
> + samsung,pins = "gpf3-5";
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + i2c_mhl_bus: i2c-mhl-bus {
> + samsung,pins = "gpf0-4", "gpf0-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + };
> +
> + usb_sel: usb-sel {
> + samsung,pins = "gpl0-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + samsung,pin-val = <0>;
> + };
> +
> + bt_en: bt-en {
> + samsung,pins = "gpl0-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> + samsung,pin-val = <0>;
> + };
> +
> + bt_res: bt-res {
> + samsung,pins = "gpl1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> + samsung,pin-val = <0>;
> + };
> +
> + otg_gp: otg-gp {
> + samsung,pins = "gpx3-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + samsung,pin-val = <0>;
> + };
> +
> + mag_mhl_gpio: mag-mhl-gpio {
> + samsung,pins = "gpd0-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + max8997_irq: max8997-irq {
> + samsung,pins = "gpx0-7";
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + max17042_fuel_irq: max17042-fuel-irq {
> + samsung,pins = "gpx2-3";
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + tsp224_irq: tsp224-irq {
> + samsung,pins = "gpx0-4";
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + };
> +};
> +
> +&sdhci_0 {
> + status = "okay";
> +
> + bus-width = <8>;
> + non-removable;
> + vmmc-supply = <&vemmc_reg>;
> +
> + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
> + pinctrl-names = "default";
> +};
> +
> +&sdhci_2 {
> + status = "okay";
> +
> + bus-width = <4>;
> + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <&vtf_reg>;
> +
> + pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
> + pinctrl-names = "default";
> +};
> +
> +&sdhci_3 {
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + non-removable;
> + bus-width = <4>;
> + mmc-pwrseq = <&wlan_pwrseq>;
> + vmmc-supply = <&vtf_reg>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
> +
> + brcmf: wifi@1 {
> + compatible = "brcm,bcm4330-fmac";
> + reg = <1>;
> +
> + interrupt-parent = <&gpx2>;
> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "host-wake";
> + };
> +};
> +
> +&serial_0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
> +
> + bluetooth {
> + compatible = "brcm,bcm4330-bt";
> +
> + shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
> + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
> + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&serial_1 {
> + status = "okay";
> +};
> +
> +&serial_2 {
> + status = "okay";
> +};
> +
> +&serial_3 {
> + status = "okay";
> +};
> +
> +&tmu {
> + status = "okay";
> +};
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
Powered by blists - more mailing lists