linux-kernel - [PATCH 10/12] pcie: qcom: add Force GEN1 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 20 Mar 2020 19:34:52 +0100
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Stanimir Varbanov <svarbanov@...sol.com>
Cc:     Sham Muthayyan <smuthayy@...eaurora.org>,
        Ansuel Smith <ansuelsmth@...il.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Andrew Murray <amurray@...goodpenguin.co.uk>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 10/12] pcie: qcom: add Force GEN1 support

From: Sham Muthayyan <smuthayy@...eaurora.org>

Add Force GEN1 support needed in some ipq806x board
that needs to limit some pcie line to gen1 for some
hardware limitation

Signed-off-by: Sham Muthayyan <smuthayy@...eaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index e26ba8f63d4f..03130a3206b4 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -123,6 +123,8 @@
 #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
 #define SLV_ADDR_SPACE_SZ			0x10000000
 
+#define PCIE20_LNK_CONTROL2_LINK_STATUS2        0xA0
+
 #define DEVICE_TYPE_RC				0x4
 
 #define QCOM_PCIE_2_1_0_MAX_SUPPLY	3
@@ -223,6 +225,7 @@ struct qcom_pcie {
 	struct phy *phy;
 	struct gpio_desc *reset;
 	const struct qcom_pcie_ops *ops;
+	uint32_t force_gen1;
 };
 
 #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
@@ -515,6 +518,11 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 
 	/* wait for clock acquisition */
 	usleep_range(1000, 1500);
+	if (pcie->force_gen1) {
+		writel_relaxed((readl_relaxed(
+			pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
+			pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
+	}
 
 
 	/* Set the Max TLP size to 2K, instead of using default of 4K */
@@ -1487,6 +1495,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	struct dw_pcie *pci;
 	struct qcom_pcie *pcie;
 	int ret;
+	uint32_t force_gen1 = 0;
+	struct device_node *np = pdev->dev.of_node;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
 	if (!pcie)
@@ -1517,6 +1527,9 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		goto err_pm_runtime_put;
 	}
 
+	of_property_read_u32(np, "force_gen1", &force_gen1);
+	pcie->force_gen1 = force_gen1;
+
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
 	pcie->parf = devm_ioremap_resource(dev, res);
 	if (IS_ERR(pcie->parf)) {
-- 
2.25.1