| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200320004922.GA3641@bogus>
Date: Thu, 19 Mar 2020 18:49:22 -0600
From: Rob Herring <robh@...nel.org>
To: Alexandru Tachici <alexandru.tachici@...log.com>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
jic23@...nel.org, Mircea Caprioru <mircea.caprioru@...log.com>
Subject: Re: [PATCH v4 2/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
On Tue, Feb 18, 2020 at 02:10:31PM +0200, Alexandru Tachici wrote:
> Adding dt-bindings documentation for AD5770R DAC.
DT list needs to be Cc'ed if you want bindings reviewed.
> Signed-off-by: Mircea Caprioru <mircea.caprioru@...log.com>
> Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
> ---
> .../bindings/iio/dac/adi,ad5770r.yaml | 185 ++++++++++++++++++
> 1 file changed, 185 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
> new file mode 100644
> index 000000000000..13d6b5ff479d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
> @@ -0,0 +1,185 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2020 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad5770r.yaml#
Jonathan mentioned 'adc' part, but 'bindings' is also wrong. Should be:
.../schemas/iio/dac/...
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD5770R DAC device driver
> +
> +maintainers:
> + - Mircea Caprioru <mircea.caprioru@...log.com>
> +
> +description: |
> + Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
> + found here:
> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - adi,ad5770r
> +
> + reg:
> + maxItems: 1
> +
> + avdd-supply:
> + description:
> + AVdd voltage supply. Represents two different supplies in the datasheet
> + that are in fact the same.
> +
> + iovdd-supply:
> + description:
> + Voltage supply for the chip interface.
> +
> + vref-supply:
> + description: Specify the voltage of the external reference used.
> + Available reference options are 1.25 V or 2.5 V. If no
> + external reference declared then the device will use the
> + internal reference of 1.25 V.
> +
> + adi,external-resistor:
> + description: Specify if an external 2.5k ohm resistor is used. If not
> + specified the device will use an internal 2.5k ohm resistor.
> + The precision resistor is used for reference current generation.
> + type: boolean
> +
> + reset-gpios:
> + description: GPIO spec for the RESET pin. If specified, it will be
> + asserted during driver probe.
> + maxItems: 1
> +
> + channel0:
channel@0 ???
Once you fix that, your example will start failing.
> + description: Represents an external channel which are
> + connected to the DAC. Channel 0 can act both as a current
> + source and sink.
> + type: object
> +
> + properties:
> + num:
Use 'reg' instead.
> + description: This represents the channel number.
> + items:
You can drop items.
> + const: 0
> +
> + adi,range-microamp:
> + description: Output range of the channel.
> + oneOf:
> + - $ref: /schemas/types.yaml#/definitions/int32-array
*-microamp already has a type, so this should be dropped. However, I
believe it's unsigned currently, but we can fix it to be signed.
> + - items:
> + - enum: [0 300000]
> + - enum: [-60000 0]
> + - enum: [-60000 300000]
Negative values don't yet work until we fix dtc to be able to output
negative values. For now, can you just avoid negative numbers in the
example.
What's defined here doesn't match the example. You are saying there are
3 cells with 2 possible values each. I think you want:
oneOf:
- items:
- const: 0
- const: 300000
- items:
- const: -60000
- const: 0
- items:
- const: -60000
- const: 300000
> +
> + channel1:
> + description: Represents an external channel which are
> + connected to the DAC.
> + type: object
> +
> + properties:
> + num:
> + description: This represents the channel number.
> + items:
> + const: 1
> +
> + adi,range-microamp:
> + description: Output range of the channel.
> + oneOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + - items:
> + - enum: [0 140000]
> + - enum: [0 250000]
> +
> + channel2:
> + description: Represents an external channel which are
> + connected to the DAC.
> + type: object
> +
> + properties:
> + num:
> + description: This represents the channel number.
> + items:
> + const: 2
> +
> + adi,range-microamp:
> + description: Output range of the channel.
> + oneOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + - items:
> + - enum: [0 140000]
> + - enum: [0 250000]
> +
> +patternProperties:
> + "^channel@([3-5])$":
> + type: object
> + description: Represents the external channels which are connected to the DAC.
> + properties:
> + num:
> + description: This represents the channel number.
> + items:
> + minimum: 3
> + maximum: 5
> +
> + adi,range-microamp:
> + description: Output range of the channel.
> + oneOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + - items:
> + - enum: [0 45000]
> + - enum: [0 100000]
> +
> +required:
> +- reg
> +- diff-channels
> +- channel0
> +- channel1
> +- channel2
> +- channel3
> +- channel4
> +- channel5
> +
> +examples:
> + - |
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ad5770r@0 {
> + compatible = "ad5770r";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + vref-supply = <&vref>;
> + adi,external-resistor;
> + reset-gpios = <&gpio 22 0>;
> +
> + channel@0 {
> + num = <0>;
> + adi,range-microamp = <(-60000) 300000>;
> + };
> +
> + channel@1 {
> + num = <1>;
> + adi,range-microamp = <0 140000>;
> + };
> +
> + channel@2 {
> + num = <2>;
> + adi,range-microamp = <0 55000>;
> + };
> +
> + channel@3 {
> + num = <3>;
> + adi,range-microamp = <0 45000>;
> + };
> +
> + channel@4 {
> + num = <4>;
> + adi,range-microamp = <0 45000>;
> + };
> +
> + channel@5 {
> + num = <5>;
> + adi,range-microamp = <0 45000>;
> + };
> + };
> + };
> +...
> --
> 2.20.1
>
Powered by blists - more mailing lists