linux-kernel - Re: [PATCH v2 07/10] dt-bindings: adv748x: add information about serial audio interface (I2S/TDM)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 20 Mar 2020 10:03:39 +0100
From:   Alex Riesen <alexander.riesen@...itec.com>
To:     Geert Uytterhoeven <geert@...ux-m68k.org>
CC:     Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Kieran Bingham <kieran.bingham@...asonboard.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>,
        driverdevel <devel@...verdev.osuosl.org>,
        Linux Media Mailing List <linux-media@...r.kernel.org>,
        "Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>
Subject: Re: [PATCH v2 07/10] dt-bindings: adv748x: add information about
 serial audio interface (I2S/TDM)

Hi Geert,

Geert Uytterhoeven, Fri, Mar 20, 2020 09:48:14 +0100:
> On Fri, Mar 20, 2020 at 9:44 AM Alex Riesen <alexander.riesen@...itec.com> wrote:
> > Laurent Pinchart, Thu, Mar 19, 2020 19:01:25 +0100:
> > > On Thu, Mar 19, 2020 at 06:42:36PM +0100, Alex Riesen wrote:
> > > > As the driver has some support for the audio interface of the device,
> > > > the bindings file should mention it.
> 
> > > > @@ -16,6 +18,8 @@ Required Properties:
> > > >      slave device on the I2C bus. The main address is mandatory, others are
> > > >      optional and remain at default values if not specified.
> > > >
> > > > +  - #clock-cells: must be <0> if the I2S port is used
> > >
> > > Wouldn't it be simpler to set it to 0 unconditionally ?
> >
> > Would it? If the port itself is optional, shouldn't the clock be an option
> > too?
> 
> You'd be surprised how many board designers would consider this a cheap
> 12.288 MHz clock source, without using the I2S port ;-)

Well, I am :-)

Especially considering that the driver will not switch the MCLK pin aktive
(all I2S-related pins are tristate by default).

And how do I require it to be set unconditionally? By just removing the
"if ..." part of the statement?

Regards,
Alex