| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1584865262-25297-4-git-send-email-zhouyanjie@wanyeetech.com>
Date: Sun, 22 Mar 2020 16:20:58 +0800
From: 周琰杰 (Zhou Yanjie)
<zhouyanjie@...yeetech.com>
To: linux-clk@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
sboyd@...nel.org, mturquette@...libre.com, robh+dt@...nel.org,
mark.rutland@....com, paul@...pouillou.net,
dongsheng.qiu@...enic.com, yanfei.li@...enic.com,
sernia.zhou@...mail.com, zhenwenjin@...il.com
Subject: [PATCH v6 2/6] clk: Ingenic: Adjust cgu code to make it compatible with X1830.
The PLL of X1830 Soc from Ingenic has been greatly changed,
the bypass control is placed in another register, so now two
registers may needed to control the PLL. To this end, the
original "reg" was changed to "pll_reg", and a new "bypass_reg"
was introduced. In addition, when calculating rate, the PLL of
X1830 introduced an extra 2x multiplier, so a new "rate_multiplier"
was introduced. And adjust the code in jz47xx-cgu.c and x1000-cgu.c,
make it to be compatible with the new cgu code.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>
---
Notes:
v1->v2:
1.Use two fields (pll_reg & bypass_reg) instead of the 2-values
array (reg[2]).
2.Remove the "pll_info->version" and add a "pll_info->rate_multiplier".
3.Fix the coding style and add more detailed commit message.
4.Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@...o.com>"
to "周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>" because
the old mailbox is in an unstable state.
v2->v3:
Adjust order from [1/5] in v2 to [2/5] in v3.
v3->v4:
Merge [3/5] in v3 into this patch.
v4->v5:
Rebase on top of kernel 5.6-rc1.
v5->v6:
Revert "pll_reg" to "reg" to minimize patch as Paul Cercueil's suggest.
drivers/clk/ingenic/cgu.c | 16 +++++++++++++---
drivers/clk/ingenic/cgu.h | 4 ++++
drivers/clk/ingenic/jz4725b-cgu.c | 2 ++
drivers/clk/ingenic/jz4740-cgu.c | 2 ++
drivers/clk/ingenic/jz4770-cgu.c | 6 +++++-
drivers/clk/ingenic/jz4780-cgu.c | 2 ++
drivers/clk/ingenic/x1000-cgu.c | 4 ++++
7 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab1302a..d7981b6 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -90,6 +90,9 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
n += pll_info->n_offset;
od_enc = ctl >> pll_info->od_shift;
od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+
+ ctl = readl(cgu->base + pll_info->bypass_reg);
+
bypass = !pll_info->no_bypass_bit &&
!!(ctl & BIT(pll_info->bypass_bit));
@@ -103,7 +106,8 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
BUG_ON(od == pll_info->od_max);
od++;
- return div_u64((u64)parent_rate * m, n * od);
+ return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+ n * od);
}
static unsigned long
@@ -136,7 +140,8 @@ ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
if (pod)
*pod = od;
- return div_u64((u64)parent_rate * m, n * od);
+ return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+ n * od);
}
static inline const struct ingenic_cgu_clk_info *to_clk_info(
@@ -209,9 +214,14 @@ static int ingenic_pll_enable(struct clk_hw *hw)
u32 ctl;
spin_lock_irqsave(&cgu->lock, flags);
- ctl = readl(cgu->base + pll_info->reg);
+ ctl = readl(cgu->base + pll_info->bypass_reg);
ctl &= ~BIT(pll_info->bypass_bit);
+
+ writel(ctl, cgu->base + pll_info->bypass_reg);
+
+ ctl = readl(cgu->base + pll_info->reg);
+
ctl |= BIT(pll_info->enable_bit);
writel(ctl, cgu->base + pll_info->reg);
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 0dc8004..2c75ef4 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -17,6 +17,7 @@
/**
* struct ingenic_cgu_pll_info - information about a PLL
* @reg: the offset of the PLL's control register within the CGU
+ * @rate_multiplier: the multiplier needed by pll rate calculation
* @m_shift: the number of bits to shift the multiplier value by (ie. the
* index of the lowest bit of the multiplier value in the PLL's
* control register)
@@ -37,6 +38,7 @@
* @od_encoding: a pointer to an array mapping post-VCO divider values to
* their encoded values in the PLL control register, or -1 for
* unsupported values
+ * @bypass_reg: the offset of the bypass control register within the CGU
* @bypass_bit: the index of the bypass bit in the PLL control register
* @enable_bit: the index of the enable bit in the PLL control register
* @stable_bit: the index of the stable bit in the PLL control register
@@ -44,10 +46,12 @@
*/
struct ingenic_cgu_pll_info {
unsigned reg;
+ unsigned rate_multiplier;
const s8 *od_encoding;
u8 m_shift, m_bits, m_offset;
u8 n_shift, n_bits, n_offset;
u8 od_shift, od_bits, od_max;
+ unsigned bypass_reg;
u8 bypass_bit;
u8 enable_bit;
u8 stable_bit;
diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index a3b4635..4799627 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -54,6 +54,7 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
.parents = { JZ4725B_CLK_EXT, -1, -1, -1 },
.pll = {
.reg = CGU_REG_CPPCR,
+ .rate_multiplier = 1,
.m_shift = 23,
.m_bits = 9,
.m_offset = 2,
@@ -65,6 +66,7 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
.od_max = 4,
.od_encoding = pll_od_encoding,
.stable_bit = 10,
+ .bypass_reg = CGU_REG_CPPCR,
.bypass_bit = 9,
.enable_bit = 8,
},
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4f0e92c..16f7e1e 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -69,6 +69,7 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.pll = {
.reg = CGU_REG_CPPCR,
+ .rate_multiplier = 1,
.m_shift = 23,
.m_bits = 9,
.m_offset = 2,
@@ -80,6 +81,7 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
.od_max = 4,
.od_encoding = pll_od_encoding,
.stable_bit = 10,
+ .bypass_reg = CGU_REG_CPPCR,
.bypass_bit = 9,
.enable_bit = 8,
},
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 956dd65..1976008 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -102,6 +102,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
.parents = { JZ4770_CLK_EXT },
.pll = {
.reg = CGU_REG_CPPCR0,
+ .rate_multiplier = 1,
.m_shift = 24,
.m_bits = 7,
.m_offset = 1,
@@ -112,6 +113,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
+ .bypass_reg = CGU_REG_CPPCR0,
.bypass_bit = 9,
.enable_bit = 8,
.stable_bit = 10,
@@ -124,6 +126,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
.parents = { JZ4770_CLK_EXT },
.pll = {
.reg = CGU_REG_CPPCR1,
+ .rate_multiplier = 1,
.m_shift = 24,
.m_bits = 7,
.m_offset = 1,
@@ -134,9 +137,10 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
+ .bypass_reg = CGU_REG_CPPCR1,
+ .no_bypass_bit = true,
.enable_bit = 7,
.stable_bit = 6,
- .no_bypass_bit = true,
},
},
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ea905ff..5102432 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -221,6 +221,7 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
#define DEF_PLL(name) { \
.reg = CGU_REG_ ## name, \
+ .rate_multiplier = 1, \
.m_shift = 19, \
.m_bits = 13, \
.m_offset = 1, \
@@ -232,6 +233,7 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
.od_max = 16, \
.od_encoding = pll_od_encoding, \
.stable_bit = 6, \
+ .bypass_reg = CGU_REG_ ## name, \
.bypass_bit = 1, \
.enable_bit = 0, \
}
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b22d87b..6f0ec9d 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -58,6 +58,7 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
.pll = {
.reg = CGU_REG_APLL,
+ .rate_multiplier = 1,
.m_shift = 24,
.m_bits = 7,
.m_offset = 1,
@@ -68,6 +69,7 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
+ .bypass_reg = CGU_REG_APLL,
.bypass_bit = 9,
.enable_bit = 8,
.stable_bit = 10,
@@ -79,6 +81,7 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
.pll = {
.reg = CGU_REG_MPLL,
+ .rate_multiplier = 1,
.m_shift = 24,
.m_bits = 7,
.m_offset = 1,
@@ -89,6 +92,7 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
+ .bypass_reg = CGU_REG_MPLL,
.bypass_bit = 6,
.enable_bit = 7,
.stable_bit = 0,
--
2.7.4
Powered by blists - more mailing lists