[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200323225254.12759-2-grygorii.strashko@ti.com>
Date: Tue, 24 Mar 2020 00:52:44 +0200
From: Grygorii Strashko <grygorii.strashko@...com>
To: Peter Ujfalusi <peter.ujfalusi@...com>,
Rob Herring <robh@...nel.org>, Tero Kristo <t-kristo@...com>,
"David S . Miller" <davem@...emloft.net>,
netdev <netdev@...r.kernel.org>, Roger Quadros <rogerq@...com>,
<devicetree@...r.kernel.org>, Jakub Kicinski <kuba@...nel.org>
CC: Murali Karicheri <m-karicheri2@...com>,
Sekhar Nori <nsekhar@...com>,
Kishon Vijay Abraham I <kishon@...com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH net-next v6 01/11] phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy
The phy-gmii-sel can be only auto selected in Kconfig and now the pretty
complex Kconfig dependencies are defined for phy-gmii-sel driver, which
also need to be updated every time phy-gmii-sel is re-used for any new
networking driver.
Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all
dependencies and from networking drivers and rely on using 'imply
PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead.
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
Acked-by: Kishon Vijay Abraham I <kishon@...com>
Tested-by: Murali Karicheri <m-karicheri2@...com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
drivers/net/ethernet/ti/Kconfig | 1 +
drivers/phy/ti/Kconfig | 3 ---
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index bf98e0fa7d8b..8a6ca16eee3b 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -53,6 +53,7 @@ config TI_CPSW
select MFD_SYSCON
select PAGE_POOL
select REGMAP
+ imply PHY_TI_GMII_SEL
---help---
This driver supports TI's CPSW Ethernet Switch.
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 6dbe9d0b9ff3..15a3bcf32308 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -106,11 +106,8 @@ config TWL4030_USB
config PHY_TI_GMII_SEL
tristate
- default y if TI_CPSW=y || TI_CPSW_SWITCHDEV=y
- depends on TI_CPSW || TI_CPSW_SWITCHDEV || COMPILE_TEST
select GENERIC_PHY
select REGMAP
- default m
help
This driver supports configuring of the TI CPSW Port mode depending on
the Ethernet PHY connected to the CPSW Port.
--
2.17.1
Powered by blists - more mailing lists