[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200323084011.GC4298@pflmari>
Date: Mon, 23 Mar 2020 09:40:11 +0100
From: Alex Riesen <alexander.riesen@...itec.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
CC: Kieran Bingham <kieran.bingham@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
"Laurent Pinchart" <laurent.pinchart@...asonboard.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>,
driverdevel <devel@...verdev.osuosl.org>,
Linux Media Mailing List <linux-media@...r.kernel.org>,
"Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>
Subject: Re: [PATCH v3 09/11] arm64: dts: renesas: salvator: add a connection
from adv748x codec (HDMI input) to the R-Car SoC
Geert Uytterhoeven, Mon, Mar 23, 2020 09:34:45 +0100:
> On Fri, Mar 20, 2020 at 5:43 PM Alex Riesen <alexander.riesen@...itec.com> wrote:
> > As all known variants of the Salvator board have the HDMI decoder
> > chip (the ADV7482) connected to the SSI4 on R-Car SoC, the ADV7482
> > endpoint and the connection definitions are placed in the common board
> > file.
> > For the same reason, the CLK_C clock line and I2C configuration (similar
> > to the ak4613, on the same interface) are added into the common file.
> >
> > Signed-off-by: Alexander Riesen <alexander.riesen@...itec.com>
> > Reviewed-by: Geert Uytterhoeven <geert@...ux-m68k.org>
>
> Did I provide a Reviewed-by?
>
> > The driver provides only MCLK clock, not the SCLK and LRCLK,
> > which are part of the I2S protocol.
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
>
> Perhaps you mixed it up with Laurent's?
Sorry. I actually did: he did provded Reviewed-by in his email, and you
did not. I was ... a little overwhelmed.
But you really did provide a lot of very useful information and it did help
to improve the code. Shall I remove the tag still?
Regards,
Alex
Powered by blists - more mailing lists