linux-kernel - [PATCH net-next v7 01/10] iopoll: introduce read_poll

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200323150600.21382-2-zhengdejin5@gmail.com>
Date:   Mon, 23 Mar 2020 23:05:51 +0800
From:   Dejin Zheng <zhengdejin5@...il.com>
To:     andrew@...n.ch, f.fainelli@...il.com, hkallweit1@...il.com,
        linux@...linux.org.uk, davem@...emloft.net, corbet@....net,
        tglx@...utronix.de, gregkh@...uxfoundation.org,
        allison@...utok.net, mchehab+samsung@...nel.org,
        netdev@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, Dejin Zheng <zhengdejin5@...il.com>
Subject: [PATCH net-next v7 01/10] iopoll: introduce read_poll_timeout macro

this macro is an extension of readx_poll_timeout macro. the accessor
function op just supports only one parameter in the readx_poll_timeout
macro, but this macro can supports multiple variable parameters for
it. so functions like phy_read(struct phy_device *phydev, u32 regnum)
and phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum) can
also use this poll timeout core. and also expand it can sleep some time
before read operation.

Signed-off-by: Dejin Zheng <zhengdejin5@...il.com>
---
v6 -> v7:
	- add a parameter sleep_before_read to support that it can sleep
	  some time before read operation in read_poll_timeout macro.
v5 -> v6:
	- no changed
v4 -> v5:
	- no changed
v3 -> v4:
	- no changed
v2 -> v3:
	- no changed
v1 -> v2:
	- no changed

 include/linux/iopoll.h | 44 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
index 35e15dfd4155..70f89b389648 100644
--- a/include/linux/iopoll.h
+++ b/include/linux/iopoll.h
@@ -13,6 +13,50 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 
+/**
+ * read_poll_timeout - Periodically poll an address until a condition is
+ *			met or a timeout occurs
+ * @op: accessor function (takes @args as its arguments)
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0
+ *            tight-loops).  Should be less than ~20ms since usleep_range
+ *            is used (see Documentation/timers/timers-howto.rst).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ * @sleep_before_read: if it is true, sleep @sleep_us before read.
+ * @args: arguments for @op poll
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @args is stored in @val. Must not
+ * be called from atomic context if sleep_us or timeout_us are used.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define read_poll_timeout(op, val, cond, sleep_us, timeout_us, \
+				sleep_before_read, args...) \
+({ \
+	u64 __timeout_us = (timeout_us); \
+	unsigned long __sleep_us = (sleep_us); \
+	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+	might_sleep_if((__sleep_us) != 0); \
+	if (sleep_before_read && __sleep_us) \
+		usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
+	for (;;) { \
+		(val) = op(args); \
+		if (cond) \
+			break; \
+		if (__timeout_us && \
+		    ktime_compare(ktime_get(), __timeout) > 0) { \
+			(val) = op(args); \
+			break; \
+		} \
+		if (__sleep_us) \
+			usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
+	} \
+	(cond) ? 0 : -ETIMEDOUT; \
+})
+
 /**
  * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs
  * @op: accessor function (takes @addr as its only argument)
-- 
2.25.0