| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANLsYkwnbmXbodEbQQGSMP-oVGeZs6N-NisicGD5DgBfzGu1rg@mail.gmail.com>
Date: Mon, 23 Mar 2020 09:14:18 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Suman Anna <s-anna@...com>
Cc: Tero Kristo <t-kristo@...com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Ohad Ben-Cohen <ohad@...ery.com>,
linux-remoteproc <linux-remoteproc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"Andrew F. Davis" <afd@...com>
Subject: Re: [PATCHv8 14/15] remoteproc/omap: Add watchdog functionality for
remote processors
On Fri, 20 Mar 2020 at 15:48, Suman Anna <s-anna@...com> wrote:
>
> On 3/20/20 3:32 PM, Mathieu Poirier wrote:
> > On Fri, Mar 13, 2020 at 10:17:17AM +0200, Tero Kristo wrote:
> >> From: Suman Anna <s-anna@...com>
> >>
> >> Remote processors can be stuck in a loop, and may not be recoverable
> >> if they do not have a built-in watchdog. The watchdog implementation
> >> for OMAP remote processors uses external gptimers that can be used
> >> to interrupt both the Linux host as well as the remote processor.
> >>
> >> Each remote processor is responsible for refreshing the timer during
> >> normal behavior - during OS task scheduling or entering the idle loop
> >> properly. During a watchdog condition (executing a tight loop causing
> >> no scheduling), the host processor gets interrupts and schedules a
> >> recovery for the corresponding remote processor. The remote processor
> >> may also get interrupted to be able to print a back trace.
> >>
> >> A menuconfig option has also been added to enable/disable the Watchdog
> >> functionality, with the default as disabled.
> >>
> >> Signed-off-by: Suman Anna <s-anna@...com>
> >> Signed-off-by: Tero Kristo <t-kristo@...com>
> >> Reviewed-by: Andrew F. Davis <afd@...com>
> >> ---
> >> v8:
> >> - minor cosmetic changes
> >>
> >> drivers/remoteproc/Kconfig | 12 +++
> >> drivers/remoteproc/omap_remoteproc.c | 152 +++++++++++++++++++++++++--
> >> 2 files changed, 153 insertions(+), 11 deletions(-)
> >>
> >> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> >> index b52abc2268cc..5f33358eb2f1 100644
> >> --- a/drivers/remoteproc/Kconfig
> >> +++ b/drivers/remoteproc/Kconfig
> >> @@ -52,6 +52,18 @@ config OMAP_REMOTEPROC
> >> It's safe to say N here if you're not interested in multimedia
> >> offloading or just want a bare minimum kernel.
> >>
> >> +config OMAP_REMOTEPROC_WATCHDOG
> >> + bool "OMAP remoteproc watchdog timer"
> >> + depends on OMAP_REMOTEPROC
> >> + default n
> >> + help
> >> + Say Y here to enable watchdog timer for remote processors.
> >> +
> >> + This option controls the watchdog functionality for the remote
> >> + processors in OMAP. Dedicated OMAP DMTimers are used by the remote
> >> + processors and triggers the timer interrupt upon a watchdog
> >> + detection.
> >> +
> >> config WKUP_M3_RPROC
> >> tristate "AMx3xx Wakeup M3 remoteproc support"
> >> depends on SOC_AM33XX || SOC_AM43XX
> >> diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
> >> index ece60a183e19..29d19a608af8 100644
> >> --- a/drivers/remoteproc/omap_remoteproc.c
> >> +++ b/drivers/remoteproc/omap_remoteproc.c
> >> @@ -24,6 +24,7 @@
> >> #include <linux/platform_device.h>
> >> #include <linux/pm_runtime.h>
> >> #include <linux/dma-mapping.h>
> >> +#include <linux/interrupt.h>
> >> #include <linux/remoteproc.h>
> >> #include <linux/mailbox_client.h>
> >> #include <linux/omap-iommu.h>
> >> @@ -72,10 +73,12 @@ struct omap_rproc_mem {
> >> * struct omap_rproc_timer - data structure for a timer used by a omap rproc
> >> * @odt: timer pointer
> >> * @timer_ops: OMAP dmtimer ops for @odt timer
> >> + * @irq: timer irq
> >> */
> >> struct omap_rproc_timer {
> >> struct omap_dm_timer *odt;
> >> const struct omap_dm_timer_ops *timer_ops;
> >> + int irq;
> >> };
> >>
> >> /**
> >> @@ -86,6 +89,7 @@ struct omap_rproc_timer {
> >> * @mem: internal memory regions data
> >> * @num_mems: number of internal memory regions
> >> * @num_timers: number of rproc timer(s)
> >> + * @num_wd_timers: number of rproc watchdog timers
> >> * @timers: timer(s) info used by rproc
> >> * @autosuspend_delay: auto-suspend delay value to be used for runtime pm
> >> * @need_resume: if true a resume is needed in the system resume callback
> >> @@ -102,6 +106,7 @@ struct omap_rproc {
> >> struct omap_rproc_mem *mem;
> >> int num_mems;
> >> int num_timers;
> >> + int num_wd_timers;
> >> struct omap_rproc_timer *timers;
> >> int autosuspend_delay;
> >> bool need_resume;
> >> @@ -219,6 +224,79 @@ static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer)
> >> return timer->timer_ops->free(timer->odt);
> >> }
> >>
> >> +/**
> >> + * omap_rproc_get_timer_irq() - get the irq for a timer
> >> + * @timer: handle to a OMAP rproc timer
> >> + *
> >> + * This function is used to get the irq associated with a watchdog timer. The
> >> + * function is called by the OMAP remoteproc driver to register a interrupt
> >> + * handler to handle watchdog events on the remote processor.
> >> + *
> >> + * Return: irq id on success, otherwise a failure as returned by DMTimer ops
> >> + */
> >> +static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
> >> +{
> >> + return timer->timer_ops->get_irq(timer->odt);
> >> +}
> >> +
> >> +/**
> >> + * omap_rproc_ack_timer_irq() - acknowledge a timer irq
> >> + * @timer: handle to a OMAP rproc timer
> >> + *
> >> + * This function is used to clear the irq associated with a watchdog timer. The
> >> + * The function is called by the OMAP remoteproc upon a watchdog event on the
> >> + * remote processor to clear the interrupt status of the watchdog timer.
> >> + */
> >> +static inline void omap_rproc_ack_timer_irq(struct omap_rproc_timer *timer)
> >> +{
> >> + timer->timer_ops->write_status(timer->odt, OMAP_TIMER_INT_OVERFLOW);
> >> +}
> >> +
> >> +/**
> >> + * omap_rproc_watchdog_isr() - Watchdog ISR handler for remoteproc device
> >> + * @irq: IRQ number associated with a watchdog timer
> >> + * @data: IRQ handler data
> >> + *
> >> + * This ISR routine executes the required necessary low-level code to
> >> + * acknowledge a watchdog timer interrupt. There can be multiple watchdog
> >> + * timers associated with a rproc (like IPUs which have 2 watchdog timers,
> >> + * one per Cortex M3/M4 core), so a lookup has to be performed to identify
> >> + * the timer to acknowledge its interrupt.
> >> + *
> >> + * The function also invokes rproc_report_crash to report the watchdog event
> >> + * to the remoteproc driver core, to trigger a recovery.
> >> + *
> >> + * Return: IRQ_HANDLED on success, otherwise IRQ_NONE
> >> + */
> >> +static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
> >> +{
> >> + struct rproc *rproc = data;
> >> + struct omap_rproc *oproc = rproc->priv;
> >> + struct device *dev = rproc->dev.parent;
> >> + struct omap_rproc_timer *timers = oproc->timers;
> >> + struct omap_rproc_timer *wd_timer = NULL;
> >> + int num_timers = oproc->num_timers + oproc->num_wd_timers;
> >> + int i;
> >> +
> >> + for (i = oproc->num_timers; i < num_timers; i++) {
> >> + if (timers[i].irq > 0 && irq == timers[i].irq) {
> >> + wd_timer = &timers[i];
> >> + break;
> >> + }
> >> + }
> >> +
> >> + if (!wd_timer) {
> >> + dev_err(dev, "invalid timer\n");
> >> + return IRQ_NONE;
> >> + }
> >> +
> >> + omap_rproc_ack_timer_irq(wd_timer);
> >> +
> >> + rproc_report_crash(rproc, RPROC_WATCHDOG);
> >> +
> >> + return IRQ_HANDLED;
> >> +}
> >> +
> >> /**
> >> * omap_rproc_enable_timers() - enable the timers for a remoteproc
> >> * @rproc: handle of a remote processor
> >> @@ -242,19 +320,26 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
> >> struct omap_rproc_timer *timers = oproc->timers;
> >> struct device *dev = rproc->dev.parent;
> >> struct device_node *np = NULL;
> >> + int num_timers = oproc->num_timers + oproc->num_wd_timers;
> >>
> >> - if (!oproc->num_timers)
> >> + if (!num_timers)
> >> return 0;
> >>
> >> if (!configure)
> >> goto start_timers;
> >>
> >> - for (i = 0; i < oproc->num_timers; i++) {
> >> - np = of_parse_phandle(dev->of_node, "ti,timers", i);
> >> + for (i = 0; i < num_timers; i++) {
> >> + if (i < oproc->num_timers)
> >> + np = of_parse_phandle(dev->of_node, "ti,timers", i);
> >> + else
> >> + np = of_parse_phandle(dev->of_node,
> >> + "ti,watchdog-timers",
> >> + (i - oproc->num_timers));
> >> if (!np) {
> >> ret = -ENXIO;
> >> dev_err(dev, "device node lookup for timer at index %d failed: %d\n",
> >> - i, ret);
> >> + i < oproc->num_timers ? i :
> >> + i - oproc->num_timers, ret);
> >> goto free_timers;
> >> }
> >>
> >> @@ -277,12 +362,14 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
> >> if (!timer_ops || !timer_ops->request_by_node ||
> >> !timer_ops->set_source || !timer_ops->set_load ||
> >> !timer_ops->free || !timer_ops->start ||
> >> - !timer_ops->stop) {
> >> + !timer_ops->stop || !timer_ops->get_irq ||
> >> + !timer_ops->write_status) {
> >> ret = -EINVAL;
> >> dev_err(dev, "device does not have required timer ops\n");
> >> goto put_node;
> >> }
> >>
> >> + timers[i].irq = -1;
> >> timers[i].timer_ops = timer_ops;
> >> ret = omap_rproc_request_timer(dev, np, &timers[i]);
> >> if (ret) {
> >> @@ -291,10 +378,33 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
> >> goto put_node;
> >> }
> >> of_node_put(np);
> >> +
> >> + if (i >= oproc->num_timers) {
> >> + timers[i].irq = omap_rproc_get_timer_irq(&timers[i]);
> >> + if (timers[i].irq < 0) {
> >> + dev_err(dev, "get_irq for timer %p failed: %d\n",
> >> + np, timers[i].irq);
> >> + ret = -EBUSY;
> >> + goto free_timers;
> >> + }
> >> +
> >> + ret = request_irq(timers[i].irq,
> >> + omap_rproc_watchdog_isr, IRQF_SHARED,
> >> + "rproc-wdt", rproc);
> >> + if (ret) {
> >> + dev_err(dev, "error requesting irq for timer %p\n",
> >> + np);
> >> + omap_rproc_release_timer(&timers[i]);
> >> + timers[i].odt = NULL;
> >> + timers[i].timer_ops = NULL;
> >> + timers[i].irq = -1;
> >> + goto free_timers;
> >> + }
> >> + }
> >> }
> >>
> >> start_timers:
> >> - for (i = 0; i < oproc->num_timers; i++) {
> >> + for (i = 0; i < num_timers; i++) {
> >> ret = omap_rproc_start_timer(&timers[i]);
> >> if (ret) {
> >> dev_err(dev, "start timer %p failed failed: %d\n", np,
> >> @@ -316,9 +426,12 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
> >> of_node_put(np);
> >> free_timers:
> >> while (i--) {
> >> + if (i >= oproc->num_timers)
> >> + free_irq(timers[i].irq, rproc);
> >> omap_rproc_release_timer(&timers[i]);
> >> timers[i].odt = NULL;
> >> timers[i].timer_ops = NULL;
> >> + timers[i].irq = -1;
> >> }
> >>
> >> return ret;
> >> @@ -341,16 +454,20 @@ static int omap_rproc_disable_timers(struct rproc *rproc, bool configure)
> >> int i;
> >> struct omap_rproc *oproc = rproc->priv;
> >> struct omap_rproc_timer *timers = oproc->timers;
> >> + int num_timers = oproc->num_timers + oproc->num_wd_timers;
> >>
> >> - if (!oproc->num_timers)
> >> + if (!num_timers)
> >> return 0;
> >>
> >> - for (i = 0; i < oproc->num_timers; i++) {
> >> + for (i = 0; i < num_timers; i++) {
> >> omap_rproc_stop_timer(&timers[i]);
> >> if (configure) {
> >> + if (i >= oproc->num_timers)
> >> + free_irq(timers[i].irq, rproc);
> >> omap_rproc_release_timer(&timers[i]);
> >> timers[i].odt = NULL;
> >> timers[i].timer_ops = NULL;
> >> + timers[i].irq = -1;
> >> }
> >> }
> >>
> >> @@ -1110,6 +1227,7 @@ static int omap_rproc_of_get_timers(struct platform_device *pdev,
> >> struct device_node *np = pdev->dev.of_node;
> >> struct omap_rproc *oproc = rproc->priv;
> >> struct device *dev = &pdev->dev;
> >> + int num_timers;
> >>
> >> /*
> >> * Timer nodes are directly used in client nodes as phandles, so
> >> @@ -1122,14 +1240,26 @@ static int omap_rproc_of_get_timers(struct platform_device *pdev,
> >> oproc->num_timers = 0;
> >> }
> >>
> >> - if (oproc->num_timers) {
> >> - oproc->timers = devm_kcalloc(dev, oproc->num_timers,
> >> +#ifdef CONFIG_OMAP_REMOTEPROC_WATCHDOG
> >> + oproc->num_wd_timers =
> >> + of_count_phandle_with_args(np, "ti,watchdog-timers", NULL);
> >> + if (oproc->num_wd_timers <= 0) {
> >> + dev_dbg(dev, "device does not have watchdog timers, status = %d\n",
> >> + oproc->num_wd_timers);
> >> + oproc->num_wd_timers = 0;
> >> + }
> >> +#endif
> >
> > I commented on the above in the previous version...
>
> Oh, misunderstood your agreed response. I have moved the entire timer
> parse into a separate function. Do you still prefer just this block to
> be defined in its own function, it is already self-contained?
Please remove the #ifdef block from the function to favour a simple
function that resolve to nothing if the configuration flag is not
defined.
>
> regards
> Suman
>
> >
> >> +
> >> + num_timers = oproc->num_timers + oproc->num_wd_timers;
> >> + if (num_timers) {
> >> + oproc->timers = devm_kcalloc(dev, num_timers,
> >> sizeof(*oproc->timers),
> >> GFP_KERNEL);
> >> if (!oproc->timers)
> >> return -ENOMEM;
> >>
> >> - dev_dbg(dev, "device has %d tick timers\n", oproc->num_timers);
> >> + dev_dbg(dev, "device has %d tick timers and %d watchdog timers\n",
> >> + oproc->num_timers, oproc->num_wd_timers);
> >> }
> >>
> >> return 0;
> >> --
> >> 2.17.1
> >>
> >> --
> >> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
Powered by blists - more mailing lists