| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1584932355-3642-4-git-send-email-yangtiezhu@loongson.cn>
Date: Mon, 23 Mar 2020 10:59:15 +0800
From: Tiezhu Yang <yangtiezhu@...ngson.cn>
To: Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Huacai Chen <chenhc@...ote.com>,
Jiaxun Yang <jiaxun.yang@...goat.com>
Cc: linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org,
Xuefeng Li <lixuefeng@...ngson.cn>
Subject: [PATCH v2 3/3] MIPS: Loongson: Add PCI support for 7A1000
Add PCI support for 7A1000 to detect PCI device.
Signed-off-by: Tiezhu Yang <yangtiezhu@...ngson.cn>
---
arch/mips/include/asm/mach-loongson64/boot_param.h | 9 +++
arch/mips/loongson64/env.c | 2 +
arch/mips/pci/ops-loongson3.c | 72 ++++++++++++++++++++--
3 files changed, 79 insertions(+), 4 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index c759b7c..d766a36 100644
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -195,6 +195,7 @@ enum loongson_bridge_type {
LS7A1000 = 2
};
+struct pci_bus;
struct loongson_system_configuration {
u32 nr_cpus;
u32 nr_nodes;
@@ -220,6 +221,8 @@ struct loongson_system_configuration {
struct sensor_device sensors[MAX_SENSORS];
u64 workarounds;
void (*early_config)(void);
+ int (*pci_config_access)(unsigned char access_type, struct pci_bus *bus,
+ unsigned int devfn, int where, u32 *data);
};
extern struct efi_memory_map_loongson *loongson_memmap;
@@ -228,5 +231,11 @@ extern struct loongson_system_configuration loongson_sysconf;
extern u32 node_id_offset;
extern void rs780e_early_config(void);
extern void ls7a1000_early_config(void);
+extern int rs780e_pci_config_access(unsigned char access_type,
+ struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *data);
+extern int ls7a1000_pci_config_access(unsigned char access_type,
+ struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *data);
#endif
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 32a3822..1c27f46 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -168,9 +168,11 @@ void __init prom_init_env(void)
pr_info("The bridge chip is Loongson 7A1000\n");
loongson_sysconf.bridgetype = LS7A1000;
loongson_sysconf.early_config = ls7a1000_early_config;
+ loongson_sysconf.pci_config_access = ls7a1000_pci_config_access;
} else {
pr_info("The bridge chip is AMD RS780E or SR5690\n");
loongson_sysconf.bridgetype = RS780E;
loongson_sysconf.early_config = rs780e_early_config;
+ loongson_sysconf.pci_config_access = rs780e_pci_config_access;
}
}
diff --git a/arch/mips/pci/ops-loongson3.c b/arch/mips/pci/ops-loongson3.c
index 2f6ad36..0b8fc5e 100644
--- a/arch/mips/pci/ops-loongson3.c
+++ b/arch/mips/pci/ops-loongson3.c
@@ -13,7 +13,10 @@
#define HT1LO_PCICFG_BASE 0x1a000000
#define HT1LO_PCICFG_BASE_TP1 0x1b000000
-static int loongson3_pci_config_access(unsigned char access_type,
+#define HT1LO_PCICFG_BASE_EXT 0xefe00000000
+#define HT1LO_PCICFG_BASE_TP1_EXT 0xefe10000000
+
+int rs780e_pci_config_access(unsigned char access_type,
struct pci_bus *bus, unsigned int devfn,
int where, u32 *data)
{
@@ -62,11 +65,72 @@ static int loongson3_pci_config_access(unsigned char access_type,
return PCIBIOS_SUCCESSFUL;
}
+
+int ls7a1000_pci_config_access(unsigned char access_type,
+ struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *data)
+{
+ u_int64_t addr;
+ void *addrp;
+ unsigned char busnum = bus->number;
+ int device = PCI_SLOT(devfn);
+ int function = PCI_FUNC(devfn);
+ int reg = where & ~3;
+
+ if (where >= PCI_CFG_SPACE_EXP_SIZE)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (busnum == 0 && device > 23)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (where < PCI_CFG_SPACE_SIZE) { /* standard config */
+ addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+ if (busnum == 0) {
+ addr = HT1LO_PCICFG_BASE | addr;
+ addrp = (void *)TO_UNCAC(addr);
+ } else {
+ addr = HT1LO_PCICFG_BASE_TP1 | addr;
+ addrp = (void *)TO_UNCAC(addr);
+ }
+ } else { /* extended config */
+ reg = (reg & 0xff) | ((reg & 0xf00) << 16);
+ addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+ if (busnum == 0) {
+ addr = HT1LO_PCICFG_BASE_EXT | addr;
+ addrp = (void *)TO_UNCAC(addr);
+ } else {
+ addr = HT1LO_PCICFG_BASE_TP1_EXT | addr;
+ addrp = (void *)TO_UNCAC(addr);
+ }
+ }
+
+ if (access_type == PCI_ACCESS_WRITE)
+ *(unsigned int *)addrp = cpu_to_le32(*data);
+ else {
+ *data = le32_to_cpu(*(unsigned int *)addrp);
+ if (*data == 0xffffffff) {
+ *data = -1;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void ls7a1000_pci_class_quirk(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+
+DECLARE_PCI_FIXUP_EARLY(0x0014, 0x7a09, ls7a1000_pci_class_quirk);
+DECLARE_PCI_FIXUP_EARLY(0x0014, 0x7a19, ls7a1000_pci_class_quirk);
+DECLARE_PCI_FIXUP_EARLY(0x0014, 0x7a29, ls7a1000_pci_class_quirk);
+
static int loongson3_pci_pcibios_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
u32 data = 0;
- int ret = loongson3_pci_config_access(PCI_ACCESS_READ,
+ int ret = loongson_sysconf.pci_config_access(PCI_ACCESS_READ,
bus, devfn, where, &data);
if (ret != PCIBIOS_SUCCESSFUL)
@@ -91,7 +155,7 @@ static int loongson3_pci_pcibios_write(struct pci_bus *bus, unsigned int devfn,
if (size == 4)
data = val;
else {
- ret = loongson3_pci_config_access(PCI_ACCESS_READ,
+ ret = loongson_sysconf.pci_config_access(PCI_ACCESS_READ,
bus, devfn, where, &data);
if (ret != PCIBIOS_SUCCESSFUL)
return ret;
@@ -104,7 +168,7 @@ static int loongson3_pci_pcibios_write(struct pci_bus *bus, unsigned int devfn,
(val << ((where & 3) << 3));
}
- ret = loongson3_pci_config_access(PCI_ACCESS_WRITE,
+ ret = loongson_sysconf.pci_config_access(PCI_ACCESS_WRITE,
bus, devfn, where, &data);
return ret;
--
2.1.0
Powered by blists - more mailing lists