lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 24 Mar 2020 14:10:53 +0100 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-kernel@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, stable@...r.kernel.org, Eugen Hristev <eugen.hristev@...rochip.com>, Stable@...r.kernel.org, Jonathan Cameron <Jonathan.Cameron@...wei.com> Subject: [PATCH 5.5 068/119] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode From: Eugen Hristev <eugen.hristev@...rochip.com> commit a500f3bd787f8224341e44b238f318c407b10897 upstream. The differential channels require writing the channel offset register (COR). Otherwise they do not work in differential mode. The configuration of COR is missing in triggered mode. Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com> Cc: <Stable@...r.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@...wei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org> --- drivers/iio/adc/at91-sama5d2_adc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -723,6 +723,7 @@ static int at91_adc_configure_trigger(st for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) { struct iio_chan_spec const *chan = at91_adc_chan_get(indio, bit); + u32 cor; if (!chan) continue; @@ -732,6 +733,20 @@ static int at91_adc_configure_trigger(st continue; if (state) { + cor = at91_adc_readl(st, AT91_SAMA5D2_COR); + + if (chan->differential) + cor |= (BIT(chan->channel) | + BIT(chan->channel2)) << + AT91_SAMA5D2_COR_DIFF_OFFSET; + else + cor &= ~(BIT(chan->channel) << + AT91_SAMA5D2_COR_DIFF_OFFSET); + + at91_adc_writel(st, AT91_SAMA5D2_COR, cor); + } + + if (state) { at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); /* enable irq only if not using DMA */
Powered by blists - more mailing lists