| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1585064650-16235-3-git-send-email-jprakash@codeaurora.org>
Date: Tue, 24 Mar 2020 21:14:09 +0530
From: Jishnu Prakash <jprakash@...eaurora.org>
To: agross@...nel.org, bjorn.andersson@...aro.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
mka@...omium.org, linus.walleij@...aro.org, sboyd@...eaurora.org,
Jonathan.Cameron@...wei.com, smohanad@...eaurora.org,
kgunda@...eaurora.org, aghayal@...eaurora.org,
Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Jishnu Prakash <jprakash@...eaurora.org>,
linux-iio@...r.kernel.org
Cc: linux-arm-msm@...r.kernel.org, linux-arm-msm-owner@...r.kernel.org
Subject: [PATCH 2/3] iio: adc: Add PMIC7 ADC bindings
Add documentation for PMIC7 ADC peripheral. For PMIC7 ADC, all SW
communication to ADC goes through PMK8350, which communicates with
other PMICs through PBS.
Signed-off-by: Jishnu Prakash <jprakash@...eaurora.org>
---
.../bindings/iio/adc/qcom,spmi-vadc.yaml | 28 ++++++++++++++++------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 72db14c..20f010c 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -13,7 +13,7 @@ maintainers:
description: |
SPMI PMIC voltage ADC (VADC) provides interface to clients to read
voltage. The VADC is a 15-bit sigma-delta ADC.
- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
+ SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
voltage. The VADC is a 16-bit sigma-delta ADC.
properties:
@@ -23,6 +23,7 @@ properties:
- qcom,spmi-adc5
- qcom,spmi-adc-rev2
- qcom,pms405-adc
+ - qcom,spmi-adc7
reg:
description: VADC base address in the SPMI PMIC register map
@@ -65,6 +66,8 @@ patternProperties:
description: |
ADC channel number.
See include/dt-bindings/iio/qcom,spmi-vadc.h
+ For PMIC7 ADC, the channel numbers are specified separately per PMIC
+ in the PMIC-specific files in include/dt-bindings/iio/.
label:
description: |
@@ -72,7 +75,7 @@ patternProperties:
For thermistor inputs connected to generic AMUX or GPIO inputs
these can vary across platform for the same pins. Hence select
the platform schematics name for this channel. It is required
- for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2".
+ for "qcom,spmi-adc5", "qcom,spmi-adc7" and "qcom,spmi-adc-rev2".
allOf:
- $ref: /schemas/types.yaml#/definitions/string
@@ -85,6 +88,8 @@ patternProperties:
of 512 will be used.
- For compatible property "qcom,spmi-adc5", valid values are 250, 420
and 840. If property is not found, default value of 840 is used.
+ - For compatible property "qcom,spmi-adc7", valid values are 85, 340
+ and 1360. If property is not found, default value of 1360 is used.
- For compatible property "qcom,spmi-adc-rev2", valid values are 256,
512 and 1024. If property is not present, default value is 1024.
allOf:
@@ -109,11 +114,11 @@ patternProperties:
channel calibration. If property is not found, channel will be
calibrated with 0.625V and 1.25V reference channels, also
known as absolute calibration.
- - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
- if this property is specified VADC will use the VDD reference (1.875V)
- and GND for channel calibration. If property is not found, channel
- will be calibrated with 0V and 1.25V reference channels, also known
- as absolute calibration.
+ - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and
+ "qcom,spmi-adc-rev2", if this property is specified VADC will use
+ the VDD reference (1.875V) and GND for channel calibration. If
+ property is not found, channel will be calibrated with 0V and 1.25V
+ reference channels, also known as absolute calibration.
type: boolean
qcom,hw-settle-time:
@@ -135,6 +140,12 @@ patternProperties:
Certain controller digital versions have valid values of
15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
If property is not found, channel will use 15us.
+ - For compatible property "qcom,spmi-adc7", delay = 15us for
+ value 0, 100us * (value) for values < 8, 1ms for value 8
+ and 2ms * (value - 8) otherwise.
+ Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000,
+ 4000, 8000, 16000, 32000, 64000, 128000 us.
+ If property is not found, channel will use 15us.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
@@ -147,6 +158,9 @@ patternProperties:
- For compatible property "qcom,spmi-vadc", valid values
are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
If property is not found, 1 sample will be used.
+ - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7"
+ and "qcom,spmi-adc-rev2", valid values are: 1, 2, 4, 8, 16.
+ If property is not found, 1 sample will be used.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists