| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200324124154.368335-1-alexandre.belloni@bootlin.com>
Date: Tue, 24 Mar 2020 13:41:54 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Nicolas Ferre <nicolas.ferre@...rochip.com>,
Ludovic Desroches <ludovic.desroches@...rochip.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: [PATCH] ARM: dts: at91: rm9200: switch to new clock bindings
Switch sama5d3 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---
arch/arm/boot/dts/at91rm9200.dtsi | 296 +++---------------------------
1 file changed, 23 insertions(+), 273 deletions(-)
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 44385718d9d4..a5040f5ea641 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -101,259 +101,9 @@ pmc: pmc@...ffc00 {
compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91rm9200-clk-main";
- #clock-cells = <0>;
- clocks = <&main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <1000000 32000000>;
- #atmel,pll-clk-output-range-cells = <3>;
- atmel,pll-clk-output-ranges = <80000000 160000000 0>,
- <150000000 180000000 2>;
- };
-
- pllb: pllbck {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKB>;
- clocks = <&main>;
- reg = <1>;
- atmel,clk-input-range = <1000000 32000000>;
- #atmel,pll-clk-output-range-cells = <3>;
- atmel,pll-clk-output-ranges = <80000000 160000000 0>,
- <150000000 180000000 2>;
- };
-
- mck: masterck {
- compatible = "atmel,at91rm9200-clk-master";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
- atmel,clk-output-range = <0 80000000>;
- atmel,clk-divisors = <1 2 3 4>;
- };
-
- usb: usbck {
- compatible = "atmel,at91rm9200-clk-usb";
- #clock-cells = <0>;
- atmel,clk-divisors = <1 2 0 0>;
- clocks = <&pllb>;
- };
-
- prog: progck {
- compatible = "atmel,at91rm9200-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
-
- prog3: prog3 {
- #clock-cells = <0>;
- reg = <3>;
- interrupts = <AT91_PMC_PCKRDY(3)>;
- };
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&usb>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <4>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
-
- pck3: pck3 {
- #clock-cells = <0>;
- reg = <11>;
- clocks = <&prog3>;
- };
- };
-
- periphck {
- compatible = "atmel,at91rm9200-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- pioC_clk: pioC_clk {
- #clock-cells = <0>;
- reg = <4>;
- };
-
- pioD_clk: pioD_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- udc_clk: udc_clk {
- #clock-cells = <0>;
- reg = <11>;
- };
-
- twi0_clk: twi0_clk {
- reg = <12>;
- #clock-cells = <0>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- ssc2_clk: ssc2_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- tc0_clk: tc0_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- tc1_clk: tc1_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- tc2_clk: tc2_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- tc3_clk: tc3_clk {
- #clock-cells = <0>;
- reg = <20>;
- };
-
- tc4_clk: tc4_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
-
- tc5_clk: tc5_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- ohci_clk: ohci_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
-
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <24>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&slow_xtal>, <&main_xtal>;
+ clock-names = "slow_xtal", "main_xtal";
};
st: timer@...ffd00 {
@@ -383,7 +133,7 @@ tcb0: timer@...a0000 {
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
@@ -395,7 +145,7 @@ tcb1: timer@...a4000 {
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
21 IRQ_TYPE_LEVEL_HIGH 0
22 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
@@ -405,7 +155,7 @@ i2c0: i2c@...b8000 {
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -415,7 +165,7 @@ mmc0: mmc@...b4000 {
compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -429,7 +179,7 @@ ssc0: ssc@...d0000 {
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "pclk";
status = "disabled";
};
@@ -440,7 +190,7 @@ ssc1: ssc@...d4000 {
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
- clocks = <&ssc1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "pclk";
status = "disabled";
};
@@ -451,7 +201,7 @@ ssc2: ssc@...d8000 {
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
- clocks = <&ssc2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "pclk";
status = "disabled";
};
@@ -463,7 +213,7 @@ macb0: ethernet@...bc000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
- clocks = <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "ether_clk";
status = "disabled";
};
@@ -803,7 +553,7 @@ pioA: gpio@...ff400 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@...ff600 {
@@ -814,7 +564,7 @@ pioB: gpio@...ff600 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioC: gpio@...ff800 {
@@ -825,7 +575,7 @@ pioC: gpio@...ff800 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioC_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
pioD: gpio@...ffa00 {
@@ -836,7 +586,7 @@ pioD: gpio@...ffa00 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
};
};
@@ -846,7 +596,7 @@ dbgu: serial@...ff200 {
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
@@ -859,7 +609,7 @@ usart0: serial@...c0000 {
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
@@ -872,7 +622,7 @@ usart1: serial@...c4000 {
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -885,7 +635,7 @@ usart2: serial@...c8000 {
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
@@ -898,7 +648,7 @@ usart3: serial@...cc000 {
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "usart";
status = "disabled";
};
@@ -907,7 +657,7 @@ usb1: gadget@...b0000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udc_clk>, <&udpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -920,7 +670,7 @@ spi0: spi@...e0000 {
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -947,7 +697,7 @@ usb0: ohci@...000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
--
2.25.1
Powered by blists - more mailing lists