linux-kernel - [PATCH 0/3] Add support to handle targets without TrustZone

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1585054044-18667-1-git-send-email-pillair@codeaurora.org>
Date:   Tue, 24 Mar 2020 18:17:21 +0530
From:   Rakesh Pillai <pillair@...eaurora.org>
To:     ath10k@...ts.infradead.org
Cc:     linux-wireless@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Rakesh Pillai <pillair@...eaurora.org>
Subject: [PATCH 0/3] Add support to handle targets without TrustZone

The iommu mapping for S2 SIDs are taken care by TrustZone.
For the targets which does not have the support of TrustZone,
these mappings need to be created in the driver using an
iommu domain.

Leaving these SIDs unconfigured will result in a global
smmu fault. Hence configuring them for Non-TrustZone targets
is mandatory.

Rakesh Pillai (3):
  dt-bindings: ath10k: Add wifi-firmware subnode for wifi node
  ath10k: Setup the msa resources before qmi init
  ath10k: Add support for targets without trustzone

 .../bindings/net/wireless/qcom,ath10k.txt          |  14 ++
 drivers/net/wireless/ath/ath10k/core.h             |   5 +
 drivers/net/wireless/ath/ath10k/qmi.c              |  55 +------
 drivers/net/wireless/ath/ath10k/qmi.h              |   3 -
 drivers/net/wireless/ath/ath10k/snoc.c             | 170 ++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/snoc.h             |   7 +
 6 files changed, 200 insertions(+), 54 deletions(-)

-- 
2.7.4