| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPcyv4gjTmZuvqkV_r3_FuGrjK=a-CVGOnLEDZ0Fpiyg2h_Lag@mail.gmail.com>
Date: Wed, 25 Mar 2020 15:32:48 -0700
From: Dan Williams <dan.j.williams@...el.com>
To: Joao Martins <joao.m.martins@...cle.com>
Cc: Linux ACPI <linux-acpi@...r.kernel.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Peter Zijlstra <peterz@...radead.org>,
Dave Hansen <dave.hansen@...ux.intel.com>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>,
linux-nvdimm <linux-nvdimm@...ts.01.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
X86 ML <x86@...nel.org>
Subject: Re: [PATCH v2 4/6] ACPI: HMAT: Refactor hmat_register_target_device
to hmem_register_device
On Tue, Mar 24, 2020 at 2:04 PM Dan Williams <dan.j.williams@...el.com> wrote:
>
> On Tue, Mar 24, 2020 at 12:41 PM Joao Martins <joao.m.martins@...cle.com> wrote:
> >
> >
> > On 3/22/20 4:12 PM, Dan Williams wrote:
> > > In preparation for exposing "Soft Reserved" memory ranges without an
> > > HMAT, move the hmem device registration to its own compilation unit and
> > > make the implementation generic.
> > >
> > > The generic implementation drops usage acpi_map_pxm_to_online_node()
> > > that was translating ACPI proximity domain values and instead relies on
> > > numa_map_to_online_node() to determine the numa node for the device.
> > >
> > > Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>
> > > Link: https://lore.kernel.org/r/158318761484.2216124.2049322072599482736.stgit@dwillia2-desk3.amr.corp.intel.com
> > > Signed-off-by: Dan Williams <dan.j.williams@...el.com>
> > > ---
> > > drivers/acpi/numa/hmat.c | 68 ++++-----------------------------------------
> > > drivers/dax/Kconfig | 4 +++
> > > drivers/dax/Makefile | 3 +-
> > > drivers/dax/hmem.c | 56 -------------------------------------
> > > drivers/dax/hmem/Makefile | 5 +++
> > > drivers/dax/hmem/device.c | 64 ++++++++++++++++++++++++++++++++++++++++++
> > > drivers/dax/hmem/hmem.c | 56 +++++++++++++++++++++++++++++++++++++
> > > include/linux/dax.h | 8 +++++
> > > 8 files changed, 144 insertions(+), 120 deletions(-)
> > > delete mode 100644 drivers/dax/hmem.c
> > > create mode 100644 drivers/dax/hmem/Makefile
> > > create mode 100644 drivers/dax/hmem/device.c
> > > create mode 100644 drivers/dax/hmem/hmem.c
> > >
> > > diff --git a/drivers/acpi/numa/hmat.c b/drivers/acpi/numa/hmat.c
> > > index a12e36a12618..134bcb40b2af 100644
> > > --- a/drivers/acpi/numa/hmat.c
> > > +++ b/drivers/acpi/numa/hmat.c
> > > @@ -24,6 +24,7 @@
> > > #include <linux/mutex.h>
> > > #include <linux/node.h>
> > > #include <linux/sysfs.h>
> > > +#include <linux/dax.h>
> > >
> > > static u8 hmat_revision;
> > > static int hmat_disable __initdata;
> > > @@ -640,66 +641,6 @@ static void hmat_register_target_perf(struct memory_target *target)
> > > node_set_perf_attrs(mem_nid, &target->hmem_attrs, 0);
> > > }
> > >
> > > -static void hmat_register_target_device(struct memory_target *target,
> > ^^^^ int ?
> >
> > > - struct resource *r)
> > > -{
> > > - /* define a clean / non-busy resource for the platform device */
> > > - struct resource res = {
> > > - .start = r->start,
> > > - .end = r->end,
> > > - .flags = IORESOURCE_MEM,
> > > - };
> > > - struct platform_device *pdev;
> > > - struct memregion_info info;
> > > - int rc, id;
> > > -
> > > - rc = region_intersects(res.start, resource_size(&res), IORESOURCE_MEM,
> > > - IORES_DESC_SOFT_RESERVED);
> > > - if (rc != REGION_INTERSECTS)
> > > - return;
> > ^ return -ENXIO;
> >
> > > -
> > > - id = memregion_alloc(GFP_KERNEL);
> > > - if (id < 0) {
> > > - pr_err("memregion allocation failure for %pr\n", &res);
> > > - return;
> > ^ return -ENOMEM;
> >
> > > - }
> > > -
> > > - pdev = platform_device_alloc("hmem", id);
> > > - if (!pdev) {
> >
> > rc = -ENOMEM;
> >
> > > - pr_err("hmem device allocation failure for %pr\n", &res);
> > > - goto out_pdev;
> > > - }
> > > -
> > > - pdev->dev.numa_node = acpi_map_pxm_to_online_node(target->memory_pxm);
> > > - info = (struct memregion_info) {
> > > - .target_node = acpi_map_pxm_to_node(target->memory_pxm),
> > > - };
> > > - rc = platform_device_add_data(pdev, &info, sizeof(info));
> > > - if (rc < 0) {
> > > - pr_err("hmem memregion_info allocation failure for %pr\n", &res);
> > > - goto out_pdev;
> > > - }
> > > -
> > > - rc = platform_device_add_resources(pdev, &res, 1);
> > > - if (rc < 0) {
> > > - pr_err("hmem resource allocation failure for %pr\n", &res);
> > > - goto out_resource;
> > > - }
> > > -
> > > - rc = platform_device_add(pdev);
> > > - if (rc < 0) {
> > > - dev_err(&pdev->dev, "device add failed for %pr\n", &res);
> > > - goto out_resource;
> > > - }
> > > -
> > > - return;
> > ^^^^^^ return 0;
> > > -
> > > -out_resource:
> > > - put_device(&pdev->dev);
> > > -out_pdev:
> > > - memregion_free(id);
> >
> > return rc;
> >
> > > -}
> > > -
> > > static void hmat_register_target_devices(struct memory_target *target)
> > > {
> > > struct resource *res;
> > > @@ -711,8 +652,11 @@ static void hmat_register_target_devices(struct memory_target *target)
> > > if (!IS_ENABLED(CONFIG_DEV_DAX_HMEM))
> > > return;
> > >
> > > - for (res = target->memregions.child; res; res = res->sibling)
> > > - hmat_register_target_device(target, res);
> > > + for (res = target->memregions.child; res; res = res->sibling) {
> > > + int target_nid = acpi_map_pxm_to_node(target->memory_pxm);
> > > +
> > > + hmem_register_device(target_nid, res);
> > > + }
> > > }
> > >
> >
> > If it makes sense to propagate error to hmem_register_device (as noted above),
> > then here perhaps a pr_err() if hmem registration fails mainly for reporting
> > purposes?
>
> Yeah, I guess it makes sense to at least log that something went wrong
> if someone wonders where their memory device went. I'll add that
> rework as a follow-on.
Now that I look again hmat_register_target_device() already has
multiple pr_err() indicating that something went wrong. The error code
would not go anywhere useful.
Powered by blists - more mailing lists