[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200325143409.13005-3-ludovic.barre@st.com>
Date: Wed, 25 Mar 2020 15:34:09 +0100
From: Ludovic Barre <ludovic.barre@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: <srinivas.kandagatla@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH V2 2/2] mmc: mmci: initialize pwr|clk|datactrl_reg with their hardware values
In mmci_write_pwr|clk|datactrlreg functions, if the desired value
is equal to corresponding variable (pwr_reg|clk_reg|datactrl_reg),
the value is not written in the register.
At probe pwr|clk|datactrl_reg of mmci_host structure are initialized
to 0 (kzalloc of mmc_alloc_host). But they does not necessarily reflect
hardware value of these registers, if they are used while boot level.
This is problematic, if we want to write 0 in these registers.
This patch initializes pwr|clk|datactrl_reg variables with their
hardware values while probing.
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
drivers/mmc/host/mmci.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 647567def612..f378ae18d5dc 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2085,6 +2085,10 @@ static int mmci_probe(struct amba_device *dev,
else if (plat->ocr_mask)
dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+ host->pwr_reg = readl_relaxed(host->base + MMCIPOWER);
+ host->clk_reg = readl_relaxed(host->base + MMCICLOCK);
+ host->datactrl_reg = readl_relaxed(host->base + MMCIDATACTRL);
+
/* We support these capabilities. */
mmc->caps |= MMC_CAP_CMD23;
--
2.17.1
Powered by blists - more mailing lists