linux-kernel - [PATCH v4 0/9] media: adv748x: add support for HDMI audio

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1585218857.git.alexander.riesen@cetitec.com>
Date:   Thu, 26 Mar 2020 11:34:54 +0100
From:   Alex Riesen <alexander.riesen@...itec.com>
To:     Kieran Bingham <kieran.bingham@...asonboard.com>
CC:     Geert Uytterhoeven <geert@...ux-m68k.org>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        "Laurent Pinchart" <laurent.pinchart@...asonboard.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>,
        <devel@...verdev.osuosl.org>, <linux-media@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-renesas-soc@...r.kernel.org>
Subject: [PATCH v4 0/9] media: adv748x: add support for HDMI audio

This adds minimal support for accessing the HDMI audio provided through the
I2S port available on ADV7481 and ADV7482 decoder devices by ADI.
The port carries audio signal from the decoded HDMI stream.

Currently, the driver only supports I2S in TDM, 8 channels a 24bit at 48kHz.
Furthermore, only left-justified, 8 slots, 32bit/slot TDM, at 256fs has been
ever tried.

An ADV7482 on the Renesas Salvator-X ES1.1 (R8A77950 SoC) was used during
development of this code.

Changes since v3:
  - use clk_hw instead of clk
    Suggested-by: Stephen Boyd <sboyd@...nel.org>

  - formatting improvements and use const where possible

  - removed implementation of log_status and EDID setting ioctls,
    those will be submitted as separate patches.
    Suggested-by: Hans Verkuil <hverkuil-cisco@...all.nl>

Changes since v2:
  - prepare/enable the clock when it is used, as it seems nothing else does
    this otherwise

  - give the clock a unique name to ensure it can be registered if there are
    multiple adv748x devices in the system

  - remove optionality note from clock cell description to ensure the device
    description matches the real device (the line is always present, even
    if not used)

Changes since v1:
  - Add ssi4_ctrl pin group to the sound pins. The pins are responsible for
    SCK4 (sample clock) WS4 and (word boundary input), and are required for
    SSI audio input over I2S.
    Reported-by: Geert Uytterhoeven <geert@...ux-m68k.org>

  - Removed the audio clock C from the list of clocks of adv748x,
    it is exactly the other way around.
    Reported-by: Geert Uytterhoeven <geert@...ux-m68k.org>

  - Add an instance of (currently) fixed rate I2S master clock (MCLK),
    connected to the audio_clk_c line of the R-Car SoC.
    Explicitly declare the device a clock producer and add it to the
    list of clocks used by the audio system of the Salvator-X board.
    Suggested-by: Geert Uytterhoeven <geert@...ux-m68k.org>

  - The implementation of DAI driver has been moved in a separate file
    and modified to activate audio decoding and I2S streaming using
    snd_soc_dai_... interfaces. This allows the driver to be used with
    just ALSA interfaces.

  - The ioctls for selecting audio output and muting have been removed,
    as not applicable.
    Suggested-by: Hans Verkuil <hverkuil-cisco@...all.nl>
    I have left implementation of the QUERYCAP in, as it seems to be required
    by v4l-ctl to support loading of EDID for this node. And setting the EDID
    is one feature I desperately need: there are devices which plainly refuse
    to talk to the sink if it does not provide EDID they like.

  - A device tree configuration without audio port will disable the audio code
    altogether, supporting integrations where the port is not connected.

  - The patches have been re-arranged, starting with the generic changes and
    changes not related to audio directly. Those will be probably sent as a
    separate series later.

  - The whole series has been rebased on top of v5.6-rc6

Alex Riesen (9):
  media: adv748x: fix end-of-line terminators in diagnostic statements
  media: adv748x: include everything adv748x.h needs into the file
  media: adv748x: reduce amount of code for bitwise modifications of
    device registers
  media: adv748x: add definitions for audio output related registers
  media: adv748x: add support for HDMI audio
  media: adv748x: prepare/enable mclk when the audio is used
  media: adv748x: only activate DAI if it is described in device tree
  dt-bindings: adv748x: add information about serial audio interface
    (I2S/TDM)
  arm64: dts: renesas: salvator: add a connection from adv748x codec
    (HDMI input) to the R-Car SoC

 .../devicetree/bindings/media/i2c/adv748x.txt |  16 +-
 .../boot/dts/renesas/r8a77950-salvator-x.dts  |   3 +-
 .../boot/dts/renesas/salvator-common.dtsi     |  47 ++-
 drivers/media/i2c/adv748x/Makefile            |   3 +-
 drivers/media/i2c/adv748x/adv748x-afe.c       |   6 +-
 drivers/media/i2c/adv748x/adv748x-core.c      |  45 +--
 drivers/media/i2c/adv748x/adv748x-csi2.c      |   8 +-
 drivers/media/i2c/adv748x/adv748x-dai.c       | 278 ++++++++++++++++++
 drivers/media/i2c/adv748x/adv748x-hdmi.c      |   6 +-
 drivers/media/i2c/adv748x/adv748x.h           |  65 +++-
 10 files changed, 435 insertions(+), 42 deletions(-)
 create mode 100644 drivers/media/i2c/adv748x/adv748x-dai.c

-- 
2.25.1.25.g9ecbe7eb18