linux-kernel - RE: [PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <000c01d60360$eea25c90$cbe715b0$@codeaurora.org>
Date:   Thu, 26 Mar 2020 16:53:05 +0530
From:   <pillair@...eaurora.org>
To:     "'Evan Green'" <evgreen@...omium.org>
Cc:     "'open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS'" 
        <devicetree@...r.kernel.org>,
        "'linux-arm Mailing List'" <linux-arm-kernel@...ts.infradead.org>,
        "'LKML'" <linux-kernel@...r.kernel.org>,
        "'linux-arm-msm'" <linux-arm-msm@...r.kernel.org>
Subject: RE: [PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node

Hi Evan,

I have sent out the v7 patch by marking a dependency on the below mentioned series
https://patchwork.kernel.org/project/linux-wireless/list/?series=261367 

> The clocks are missing:
> clocks = <&rpmhcc RPMH_RF_CLK2>;
> clock-names = "cxo_ref_clk_pin";
These clocks are optional and were required for older firmware.
It's not needed now.

Thanks,
Rakesh Pillai

> -----Original Message-----
> From: Evan Green <evgreen@...omium.org>
> Sent: Wednesday, March 25, 2020 9:34 PM
> To: pillair@...eaurora.org
> Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
> <devicetree@...r.kernel.org>; linux-arm Mailing List <linux-arm-
> kernel@...ts.infradead.org>; LKML <linux-kernel@...r.kernel.org>; linux-
> arm-msm <linux-arm-msm@...r.kernel.org>
> Subject: Re: [PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN
> module device node
> 
> On Wed, Mar 25, 2020 at 4:05 AM <pillair@...eaurora.org> wrote:
> >
> > Hi Evan,
> >
> > I will send out a v7 for this patchset.
> > Since I have to configure the S2 SIDs, it is dependent on below ath10k
> patchset.
> > https://patchwork.kernel.org/project/linux-wireless/list/?series=261367
> 
> Ah, right. Thanks for the info, I'll check out that series as well.
> -Evan