| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200326155822.19400-4-b.zolnierkie@samsung.com>
Date: Thu, 26 Mar 2020 16:57:58 +0100
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Jens Axboe <axboe@...nel.dk>
Cc: Michael Schmitz <schmitzmic@...il.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Christoph Hellwig <hch@....de>, linux-ide@...r.kernel.org,
linux-m68k@...ts.linux-m68k.org, linux-kernel@...r.kernel.org,
b.zolnierkie@...sung.com,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>
Subject: [PATCH v5 03/27] ata: make SATA_PMP option selectable only if any
SATA host driver is enabled
There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.
This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.
CC: "James E.J. Bottomley" <jejb@...ux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@...cle.com> # for SCSI bits
Reviewed-by: Christoph Hellwig <hch@....de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
drivers/ata/Kconfig | 40 +++++++++++++++++++++++++++++++++++++
drivers/scsi/Kconfig | 1 +
drivers/scsi/libsas/Kconfig | 1 +
3 files changed, 42 insertions(+)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a6beb2c5a692..ad7760656f71 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -34,6 +34,9 @@ if ATA
config ATA_NONSTANDARD
bool
+config SATA_HOST
+ bool
+
config ATA_VERBOSE_ERROR
bool "Verbose ATA error reporting"
default y
@@ -73,6 +76,7 @@ config SATA_ZPODD
config SATA_PMP
bool "SATA Port Multiplier support"
+ depends on SATA_HOST
default y
help
This option adds support for SATA Port Multipliers
@@ -85,6 +89,7 @@ comment "Controllers with non-SFF native interface"
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for AHCI Serial ATA.
@@ -111,6 +116,7 @@ config SATA_MOBILE_LPM_POLICY
config SATA_AHCI_PLATFORM
tristate "Platform AHCI SATA support"
+ select SATA_HOST
help
This option enables support for Platform AHCI Serial ATA
controllers.
@@ -121,6 +127,7 @@ config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
ARCH_BCM_63XX
+ select SATA_HOST
help
This option enables support for the AHCI SATA3 controller found on
Broadcom SoC's.
@@ -130,6 +137,7 @@ config AHCI_BRCM
config AHCI_DA850
tristate "DaVinci DA850 AHCI SATA support"
depends on ARCH_DAVINCI_DA850
+ select SATA_HOST
help
This option enables support for the DaVinci DA850 SoC's
onboard AHCI SATA.
@@ -139,6 +147,7 @@ config AHCI_DA850
config AHCI_DM816
tristate "DaVinci DM816 AHCI SATA support"
depends on ARCH_OMAP2PLUS
+ select SATA_HOST
help
This option enables support for the DaVinci DM816 SoC's
onboard AHCI SATA controller.
@@ -148,6 +157,7 @@ config AHCI_DM816
config AHCI_ST
tristate "ST AHCI SATA support"
depends on ARCH_STI
+ select SATA_HOST
help
This option enables support for ST AHCI SATA controller.
@@ -157,6 +167,7 @@ config AHCI_IMX
tristate "Freescale i.MX AHCI SATA support"
depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
+ select SATA_HOST
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
@@ -166,6 +177,7 @@ config AHCI_IMX
config AHCI_CEVA
tristate "CEVA AHCI SATA support"
depends on OF
+ select SATA_HOST
help
This option enables support for the CEVA AHCI SATA.
It can be found on the Xilinx Zynq UltraScale+ MPSoC.
@@ -176,6 +188,7 @@ config AHCI_MTK
tristate "MediaTek AHCI SATA support"
depends on ARCH_MEDIATEK
select MFD_SYSCON
+ select SATA_HOST
help
This option enables support for the MediaTek SoC's
onboard AHCI SATA controller.
@@ -185,6 +198,7 @@ config AHCI_MTK
config AHCI_MVEBU
tristate "Marvell EBU AHCI SATA support"
depends on ARCH_MVEBU
+ select SATA_HOST
help
This option enables support for the Marvebu EBU SoC's
onboard AHCI SATA.
@@ -203,6 +217,7 @@ config AHCI_OCTEON
config AHCI_SUNXI
tristate "Allwinner sunxi AHCI SATA support"
depends on ARCH_SUNXI
+ select SATA_HOST
help
This option enables support for the Allwinner sunxi SoC's
onboard AHCI SATA.
@@ -212,6 +227,7 @@ config AHCI_SUNXI
config AHCI_TEGRA
tristate "NVIDIA Tegra AHCI SATA support"
depends on ARCH_TEGRA
+ select SATA_HOST
help
This option enables support for the NVIDIA Tegra SoC's
onboard AHCI SATA.
@@ -221,12 +237,14 @@ config AHCI_TEGRA
config AHCI_XGENE
tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
depends on PHY_XGENE
+ select SATA_HOST
help
This option enables support for APM X-Gene SoC SATA host controller.
config AHCI_QORIQ
tristate "Freescale QorIQ AHCI SATA support"
depends on OF
+ select SATA_HOST
help
This option enables support for the Freescale QorIQ AHCI SoC's
onboard AHCI SATA.
@@ -236,6 +254,7 @@ config AHCI_QORIQ
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
+ select SATA_HOST
help
This option enables support for Freescale 3.0Gbps SATA controller.
It can be found on MPC837x and MPC8315.
@@ -245,6 +264,7 @@ config SATA_FSL
config SATA_GEMINI
tristate "Gemini SATA bridge support"
depends on ARCH_GEMINI || COMPILE_TEST
+ select SATA_HOST
default ARCH_GEMINI
help
This enabled support for the FTIDE010 to SATA bridge
@@ -255,6 +275,7 @@ config SATA_GEMINI
config SATA_AHCI_SEATTLE
tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
depends on ARCH_SEATTLE
+ select SATA_HOST
help
This option enables support for AMD Seattle SATA host controller.
@@ -263,12 +284,14 @@ config SATA_AHCI_SEATTLE
config SATA_INIC162X
tristate "Initio 162x SATA support (Very Experimental)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Initio 162x Serial ATA.
config SATA_ACARD_AHCI
tristate "ACard AHCI variant (ATP 8620)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Acard.
@@ -277,6 +300,7 @@ config SATA_ACARD_AHCI
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
@@ -326,6 +350,7 @@ config PATA_OCTEON_CF
config SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Pacific Digital Serial ATA QStor.
@@ -334,6 +359,7 @@ config SATA_QSTOR
config SATA_SX4
tristate "Promise SATA SX4 support (Experimental)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Promise Serial ATA SX4.
@@ -357,6 +383,7 @@ comment "SATA SFF controllers with BMDMA"
config ATA_PIIX
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for ICH5/6/7/8 Serial ATA
and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
@@ -368,6 +395,7 @@ config SATA_DWC
tristate "DesignWare Cores SATA support"
depends on DMADEVICES
select GENERIC_PHY
+ select SATA_HOST
help
This option enables support for the on-chip SATA controller of the
AppliedMicro processor 460EX.
@@ -398,6 +426,7 @@ config SATA_DWC_VDEBUG
config SATA_HIGHBANK
tristate "Calxeda Highbank SATA support"
depends on ARCH_HIGHBANK || COMPILE_TEST
+ select SATA_HOST
help
This option enables support for the Calxeda Highbank SoC's
onboard SATA.
@@ -409,6 +438,7 @@ config SATA_MV
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
select GENERIC_PHY
+ select SATA_HOST
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
@@ -419,6 +449,7 @@ config SATA_MV
config SATA_NV
tristate "NVIDIA SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for NVIDIA Serial ATA.
@@ -427,6 +458,7 @@ config SATA_NV
config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Promise Serial ATA TX2/TX4.
@@ -435,6 +467,7 @@ config SATA_PROMISE
config SATA_RCAR
tristate "Renesas R-Car SATA support"
depends on ARCH_RENESAS || COMPILE_TEST
+ select SATA_HOST
help
This option enables support for Renesas R-Car Serial ATA.
@@ -443,6 +476,7 @@ config SATA_RCAR
config SATA_SIL
tristate "Silicon Image SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Silicon Image Serial ATA.
@@ -452,6 +486,7 @@ config SATA_SIS
tristate "SiS 964/965/966/180 SATA support"
depends on PCI
select PATA_SIS
+ select SATA_HOST
help
This option enables support for SiS Serial ATA on
SiS 964/965/966/180 and Parallel ATA on SiS 180.
@@ -462,6 +497,7 @@ config SATA_SIS
config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
@@ -471,6 +507,7 @@ config SATA_SVW
config SATA_ULI
tristate "ULi Electronics SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for ULi Electronics SATA.
@@ -479,6 +516,7 @@ config SATA_ULI
config SATA_VIA
tristate "VIA SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for VIA Serial ATA.
@@ -487,6 +525,7 @@ config SATA_VIA
config SATA_VITESSE
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
@@ -1113,6 +1152,7 @@ config PATA_ACPI
config ATA_GENERIC
tristate "Generic ATA support"
depends on PCI && ATA_BMDMA
+ select SATA_HOST
help
This option enables support for generic BIOS configured
ATA controllers via the new ATA layer
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index b5be6f43ec3f..17feff174f57 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -980,6 +980,7 @@ config SCSI_SYM53C8XX_MMIO
config SCSI_IPR
tristate "IBM Power Linux RAID adapter support"
depends on PCI && SCSI && ATA
+ select SATA_HOST
select FW_LOADER
select IRQ_POLL
select SGL_ALLOC
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index 5c6a5eff2f8e..052ee3a26f6e 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -19,6 +19,7 @@ config SCSI_SAS_ATA
bool "ATA support for libsas (requires libata)"
depends on SCSI_SAS_LIBSAS
depends on ATA = y || ATA = SCSI_SAS_LIBSAS
+ select SATA_HOST
help
Builds in ATA support into libsas. Will necessitate
the loading of libata along with libsas.
--
2.24.1
Powered by blists - more mailing lists