[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <11a058bc-a947-a763-680f-a11fd454925a@synopsys.com>
Date: Fri, 27 Mar 2020 10:11:59 +0000
From: Tejas Joglekar <Tejas.Joglekar@...opsys.com>
To: Greg KH <gregkh@...uxfoundation.org>,
Tejas Joglekar <Tejas.Joglekar@...opsys.com>
CC: "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
John Youn <John.Youn@...opsys.com>
Subject: Re: [RESENDING RFC PATCH 1/4] dt-bindings: usb: Add
snps,consolidate-sgl & consolidate-sgl
Hi,
On 3/27/2020 3:24 PM, Greg KH wrote:
> On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote:
>> This commit adds the documentation for consolidate-sgl, and
>> snps,consolidate-sgl property. These when set enables the quirk for
>> XHCI driver for consolidation of sg list into a temporary buffer when small
>> buffer sizes are scattered over the sg list not making up to MPS or total
>> transfer size within TRB cache size with Synopsys xHC.
>>
>> Signed-off-by: Tejas Joglekar <joglekar@...opsys.com>
>> ---
>> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++
>> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++
>> 2 files changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
>> index 9946ff9ba735..292d1f7969e4 100644
>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
>> @@ -104,6 +104,9 @@ Optional properties:
>> this and tx-thr-num-pkt-prd to a valid, non-zero value
>> 1-16 (DWC_usb31 programming guide section 1.2.3) to
>> enable periodic ESS TX threshold.
>> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use
>> + SG buffers of at least MPS size by consolidating smaller SG
>> + buffers list into a single buffer.
>>
>> - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
>> - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0
>> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> index 3f378951d624..a90d853557ee 100644
>> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> @@ -43,6 +43,9 @@ Optional properties:
>> - quirk-broken-port-ped: set if the controller has broken port disable mechanism
>> - imod-interval-ns: default interrupt moderation interval is 5000ns
>> - phys : see usb-hcd.yaml in the current directory
>> + - consolidate-sgl: indicate if you need to consolidate sg list into a
>> + temporary buffer when small SG buffer sizes does not make upto MPS
>> + size or total transfer size across the TRB cache size.
>
> Shouldn't this refer to the fact that the hardware is broken? Otherwise
> why would anyone know if they should, or should not, enable this option?
>
We have not seen issue with Linux environment for now. But with other OS with
SG list with very small buffer sizes the xHC controller hang was seen. So
currently introducing the binding as optional one. One could enable this
option when xHC halt happens due to small SG list sizes.
> thanks,
>
> greg k-h
>
Thanks & Regards,
Tejas Joglekar
Powered by blists - more mailing lists