[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200327145417.GA30341@google.com>
Date: Fri, 27 Mar 2020 09:54:17 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: Tom Joseph <tjoseph@...ence.com>, Rob Herring <robh+dt@...nel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Andrew Murray <amurray@...goodpenguin.co.uk>,
Mark Rutland <mark.rutland@....com>, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] PCI: Cadence: Remove using
"cdns,max-outbound-regions" DT property
Update subject to match capitalization of others:
PCI: cadence: Remove "cdns,max-outbound-regions" DT property
On Fri, Mar 27, 2020 at 04:17:27PM +0530, Kishon Vijay Abraham I wrote:
> "cdns,max-outbound-regions" device tree property provides the
> maximum number of outbound regions supported by the Host PCIe
> controller. However the outbound regions are configured based
> on what is populated in the "ranges" DT property.
Looks like this is missing a blank line here? Or it should be
rewrapped as part of the above paragraph? I think the below makes
more sense as a separate paragraph, though.
Again, thanks for doing this; this is a great cleanup.
> Avoid using two properties for configuring outbound regions and
> use only "ranges" property instead.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
> ---
> drivers/pci/controller/cadence/pcie-cadence-host.c | 6 ------
> drivers/pci/controller/cadence/pcie-cadence.h | 2 --
> 2 files changed, 8 deletions(-)
>
> diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
> index 60f912a657b9..8f72967f298f 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence-host.c
> +++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
> @@ -140,9 +140,6 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
> for_each_of_pci_range(&parser, &range) {
> bool is_io;
>
> - if (r >= rc->max_regions)
> - break;
> -
> if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
> is_io = false;
> else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
> @@ -221,9 +218,6 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
> pcie = &rc->pcie;
> pcie->is_rc = true;
>
> - rc->max_regions = 32;
> - of_property_read_u32(np, "cdns,max-outbound-regions", &rc->max_regions);
> -
> if (!of_pci_dma_range_parser_init(&parser, np))
> if (of_pci_range_parser_one(&parser, &range))
> rc->no_bar_nbits = ilog2(range.size);
> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
> index a2b28b912ca4..6bd89a21bb1c 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence.h
> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
> @@ -251,7 +251,6 @@ struct cdns_pcie {
> * @bus_range: first/last buses behind the PCIe host controller
> * @cfg_base: IO mapped window to access the PCI configuration space of a
> * single function at a time
> - * @max_regions: maximum number of regions supported by the hardware
> * @no_bar_nbits: Number of bits to keep for inbound (PCIe -> CPU) address
> * translation (nbits sets into the "no BAR match" register)
> * @vendor_id: PCI vendor ID
> @@ -262,7 +261,6 @@ struct cdns_pcie_rc {
> struct resource *cfg_res;
> struct resource *bus_range;
> void __iomem *cfg_base;
> - u32 max_regions;
> u32 no_bar_nbits;
> u16 vendor_id;
> u16 device_id;
> --
> 2.17.1
>
Powered by blists - more mailing lists