| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <158551356846.28353.13339005587852171447.tip-bot2@tip-bot2>
Date: Sun, 29 Mar 2020 20:26:08 -0000
From: "tip-bot2 for Marc Zyngier" <tip-bot2@...utronix.de>
To: linux-tip-commits@...r.kernel.org
Cc: Marc Zyngier <maz@...nel.org>, Zenghui Yu <yuzenghui@...wei.com>,
x86 <x86@...nel.org>, LKML <linux-kernel@...r.kernel.org>
Subject: [tip: irq/core] irqchip/gic-v4.1: Add initial SGI configuration
The following commit has been merged into the irq/core branch of tip:
Commit-ID: e252cf8a34d92adf41124cb59b19b49d25395548
Gitweb: https://git.kernel.org/tip/e252cf8a34d92adf41124cb59b19b49d25395548
Author: Marc Zyngier <maz@...nel.org>
AuthorDate: Wed, 04 Mar 2020 20:33:16
Committer: Marc Zyngier <maz@...nel.org>
CommitterDate: Tue, 24 Mar 2020 12:05:08
irqchip/gic-v4.1: Add initial SGI configuration
The GICv4.1 ITS has yet another new command (VSGI) which allows
a VPE-targeted SGI to be configured (or have its pending state
cleared). Add support for this command and plumb it into the
activate irqdomain callback so that it is ready to be used.
Signed-off-by: Marc Zyngier <maz@...nel.org>
Reviewed-by: Zenghui Yu <yuzenghui@...wei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-10-maz@kernel.org
---
drivers/irqchip/irq-gic-v3-its.c | 92 ++++++++++++++++++++++++++++-
include/linux/irqchip/arm-gic-v3.h | 3 +-
2 files changed, 93 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index c9c8121..28c856a 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -380,6 +380,15 @@ struct its_cmd_desc {
struct {
struct its_vpe *vpe;
} its_invdb_cmd;
+
+ struct {
+ struct its_vpe *vpe;
+ u8 sgi;
+ u8 priority;
+ bool enable;
+ bool group;
+ bool clear;
+ } its_vsgi_cmd;
};
};
@@ -528,6 +537,31 @@ static void its_encode_db(struct its_cmd_block *cmd, bool db)
its_mask_encode(&cmd->raw_cmd[2], db, 63, 63);
}
+static void its_encode_sgi_intid(struct its_cmd_block *cmd, u8 sgi)
+{
+ its_mask_encode(&cmd->raw_cmd[0], sgi, 35, 32);
+}
+
+static void its_encode_sgi_priority(struct its_cmd_block *cmd, u8 prio)
+{
+ its_mask_encode(&cmd->raw_cmd[0], prio >> 4, 23, 20);
+}
+
+static void its_encode_sgi_group(struct its_cmd_block *cmd, bool grp)
+{
+ its_mask_encode(&cmd->raw_cmd[0], grp, 10, 10);
+}
+
+static void its_encode_sgi_clear(struct its_cmd_block *cmd, bool clr)
+{
+ its_mask_encode(&cmd->raw_cmd[0], clr, 9, 9);
+}
+
+static void its_encode_sgi_enable(struct its_cmd_block *cmd, bool en)
+{
+ its_mask_encode(&cmd->raw_cmd[0], en, 8, 8);
+}
+
static inline void its_fixup_cmd(struct its_cmd_block *cmd)
{
/* Let's fixup BE commands */
@@ -893,6 +927,26 @@ static struct its_vpe *its_build_invdb_cmd(struct its_node *its,
return valid_vpe(its, desc->its_invdb_cmd.vpe);
}
+static struct its_vpe *its_build_vsgi_cmd(struct its_node *its,
+ struct its_cmd_block *cmd,
+ struct its_cmd_desc *desc)
+{
+ if (WARN_ON(!is_v4_1(its)))
+ return NULL;
+
+ its_encode_cmd(cmd, GITS_CMD_VSGI);
+ its_encode_vpeid(cmd, desc->its_vsgi_cmd.vpe->vpe_id);
+ its_encode_sgi_intid(cmd, desc->its_vsgi_cmd.sgi);
+ its_encode_sgi_priority(cmd, desc->its_vsgi_cmd.priority);
+ its_encode_sgi_group(cmd, desc->its_vsgi_cmd.group);
+ its_encode_sgi_clear(cmd, desc->its_vsgi_cmd.clear);
+ its_encode_sgi_enable(cmd, desc->its_vsgi_cmd.enable);
+
+ its_fixup_cmd(cmd);
+
+ return valid_vpe(its, desc->its_vsgi_cmd.vpe);
+}
+
static u64 its_cmd_ptr_to_offset(struct its_node *its,
struct its_cmd_block *ptr)
{
@@ -3870,6 +3924,26 @@ static struct irq_chip its_vpe_4_1_irq_chip = {
.irq_set_vcpu_affinity = its_vpe_4_1_set_vcpu_affinity,
};
+static void its_configure_sgi(struct irq_data *d, bool clear)
+{
+ struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
+ struct its_cmd_desc desc;
+
+ desc.its_vsgi_cmd.vpe = vpe;
+ desc.its_vsgi_cmd.sgi = d->hwirq;
+ desc.its_vsgi_cmd.priority = vpe->sgi_config[d->hwirq].priority;
+ desc.its_vsgi_cmd.enable = vpe->sgi_config[d->hwirq].enabled;
+ desc.its_vsgi_cmd.group = vpe->sgi_config[d->hwirq].group;
+ desc.its_vsgi_cmd.clear = clear;
+
+ /*
+ * GICv4.1 allows us to send VSGI commands to any ITS as long as the
+ * destination VPE is mapped there. Since we map them eagerly at
+ * activation time, we're pretty sure the first GICv4.1 ITS will do.
+ */
+ its_send_single_vcommand(find_4_1_its(), its_build_vsgi_cmd, &desc);
+}
+
static int its_sgi_set_affinity(struct irq_data *d,
const struct cpumask *mask_val,
bool force)
@@ -3920,13 +3994,29 @@ static void its_sgi_irq_domain_free(struct irq_domain *domain,
static int its_sgi_irq_domain_activate(struct irq_domain *domain,
struct irq_data *d, bool reserve)
{
+ /* Write out the initial SGI configuration */
+ its_configure_sgi(d, false);
return 0;
}
static void its_sgi_irq_domain_deactivate(struct irq_domain *domain,
struct irq_data *d)
{
- /* Nothing to do */
+ struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
+
+ /*
+ * The VSGI command is awkward:
+ *
+ * - To change the configuration, CLEAR must be set to false,
+ * leaving the pending bit unchanged.
+ * - To clear the pending bit, CLEAR must be set to true, leaving
+ * the configuration unchanged.
+ *
+ * You just can't do both at once, hence the two commands below.
+ */
+ vpe->sgi_config[d->hwirq].enabled = false;
+ its_configure_sgi(d, false);
+ its_configure_sgi(d, true);
}
static const struct irq_domain_ops its_sgi_domain_ops = {
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index b28acfa..fd3be49 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -502,8 +502,9 @@
#define GITS_CMD_VMAPTI GITS_CMD_GICv4(GITS_CMD_MAPTI)
#define GITS_CMD_VMOVI GITS_CMD_GICv4(GITS_CMD_MOVI)
#define GITS_CMD_VSYNC GITS_CMD_GICv4(GITS_CMD_SYNC)
-/* VMOVP and INVDB are the odd ones, as they dont have a physical counterpart */
+/* VMOVP, VSGI and INVDB are the odd ones, as they dont have a physical counterpart */
#define GITS_CMD_VMOVP GITS_CMD_GICv4(2)
+#define GITS_CMD_VSGI GITS_CMD_GICv4(3)
#define GITS_CMD_INVDB GITS_CMD_GICv4(0xe)
/*
Powered by blists - more mailing lists