| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 30 Mar 2020 16:46:30 +0530
From: Kuldeep Singh <kuldeep.singh@....com>
To: Shawn Guo <shawnguo@...nel.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Li Yang <leoyang.li@....com>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Kuldeep Singh <kuldeep.singh@....com>,
Ashish Kumar <Ashish.kumar@....com>
Subject: [PATCH] arm64: dts: ls1012a: Add QSPI node properties
Add support for QSPI on NXP layerscape LS1012A-RDB, LS1012A-QDS,
LS1012A-FRDM and LS1012A-FRWY boards.
LS1012A-RDB has 2 Spansion "s25fs512s" flashes of size 64M each and only
one can be accessed at a time.
LS1012A-QDS/FRDM has 1 spansion "s25fs512s" flash of size 64M.
LS1012A-FRWY has one winbond "w25q16dw" flash of size 2M.
Use generic compatibles as "jedec,spi-nor" for automatic detection of
flash. Configure RX and TX buswidth values as 2 as only two I/O lines are
available for data transfer.
Add ls1012a(si) node alongwith flash nodes.
Signed-off-by: Ashish Kumar <Ashish.kumar@....com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@....com>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 13 +++++++++++++
5 files changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index f90c040..6770266 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -74,6 +74,21 @@
};
};
+&qspi {
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+};
+
&sai2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
index 8749634..6290e2f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -23,3 +23,18 @@
&i2c0 {
status = "okay";
};
+
+&qspi {
+ status = "okay";
+
+ w25q16dw0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 2fb1cb1..449475a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -128,6 +128,21 @@
};
};
+&qspi {
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+};
+
&sai2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index 5edb1e1..d45c176 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -35,6 +35,21 @@
status = "okay";
};
+&qspi {
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 3379193..006e544 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -137,6 +137,19 @@
#size-cells = <2>;
ranges;
+ qspi: spi@...0000 {
+ compatible = "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ status = "disabled";
+ };
+
esdhc0: esdhc@...0000 {
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
--
2.7.4
Powered by blists - more mailing lists