| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200330113542.181752-6-adrian.ratiu@collabora.com>
Date: Mon, 30 Mar 2020 14:35:42 +0300
From: Adrian Ratiu <adrian.ratiu@...labora.com>
To: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Cc: linux-stm32@...md-mailman.stormreply.com,
linux-rockchip@...ts.infradead.org,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-imx@....com, kernel@...labora.com,
Andrzej Hajda <a.hajda@...sung.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Rob Herring <robh@...nel.org>,
Neil Armstrong <narmstrong@...libre.com>,
Sjoerd Simons <sjoerd.simons@...labora.com>,
Martyn Welch <martyn.welch@...labora.com>
Subject: [PATCH v5 5/5] dt-bindings: display: add i.MX6 MIPI DSI host controller doc
This provides an example DT binding for the MIPI DSI host controller
present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP.
Cc: Rob Herring <robh@...nel.org>
Cc: Neil Armstrong <narmstrong@...libre.com>
Cc: devicetree@...r.kernel.org
Signed-off-by: Sjoerd Simons <sjoerd.simons@...labora.com>
Signed-off-by: Martyn Welch <martyn.welch@...labora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@...labora.com>
---
Changes since v4:
- Fixed yaml binding to pass `make dt_binding_check dtbs_check`
and addressed received binding feedback (Rob)
Changes since v3:
- Added commit message (Neil)
- Converted to yaml format (Neil)
- Minor dt node + driver fixes (Rob)
- Added small panel example to the host controller binding
Changes since v2:
- Fixed commit tags (Emil)
---
.../display/imx/fsl,mipi-dsi-imx6.yaml | 134 ++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
new file mode 100644
index 000000000000..59146df11510
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,mipi-dsi-imx6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 DW MIPI DSI Host Controller
+
+maintainers:
+ - Adrian Ratiu <adrian.ratiu@...labora.com>
+
+description: |
+ The i.MX6 DSI host controller is a Synopsys DesignWare MIPI DSI v1.01
+ IP block with a companion PHY IP.
+
+ These DT bindings follow the Synopsys DW MIPI DSI bindings defined in
+ Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt with
+ the following device-specific properties.
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx6q-mipi-dsi
+ - const: snps,dw-mipi-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Module Clock
+ - description: DSI bus clock
+
+ clock-names:
+ items:
+ - const: ref
+ - const: pclk
+
+ fsl,gpr:
+ description: Phandle to the iomuxc-gpr region containing the multiplexer control register.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ ports:
+ type: object
+ description: |
+ A node containing DSI input & output port nodes with endpoint
+ definitions as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ Documentation/devicetree/bindings/graph.txt
+ properties:
+ port@0:
+ type: object
+ description:
+ DSI input port node, connected to the ltdc rgb output port.
+
+ port@1:
+ type: object
+ description:
+ DSI output port node, connected to a panel or a bridge input port"
+
+patternProperties:
+ "^panel@[0-3]$":
+ type: object
+ description: |
+ A node containing the panel or bridge description as documented in
+ Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+ properties:
+ port:
+ type: object
+ description:
+ Panel or bridge port node, connected to the DSI output port (port@1)
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi: dsi@...0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0x021e0000 0x4000>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,gpr = <&gpr>;
+ clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+ <&clks IMX6QDL_CLK_MIPI_IPG>;
+ clock-names = "ref", "pclk";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "sharp,ls032b3sx01";
+ reg = <0>;
+ reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+ ports {
+ port@0 {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
--
2.26.0
Powered by blists - more mailing lists