[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5CEZSBfhb9xAdf=sDhUnmSeuWSsnUQArz=a1TPzytLAeQ@mail.gmail.com>
Date: Mon, 30 Mar 2020 08:49:19 -0300
From: Fabio Estevam <festevam@...il.com>
To: Adrian Ratiu <adrian.ratiu@...labora.com>
Cc: "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-stm32@...md-mailman.stormreply.com,
linux-rockchip@...ts.infradead.org,
DRI mailing list <dri-devel@...ts.freedesktop.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
NXP Linux Team <linux-imx@....com>, kernel@...labora.com,
Andrzej Hajda <a.hajda@...sung.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Emil Velikov <emil.velikov@...labora.com>,
Sjoerd Simons <sjoerd.simons@...labora.com>,
Martyn Welch <martyn.welch@...labora.com>
Subject: Re: [PATCH v5 4/5] drm: imx: Add i.MX 6 MIPI DSI host platform driver
Hi Adrian,
On Mon, Mar 30, 2020 at 8:34 AM Adrian Ratiu <adrian.ratiu@...labora.com> wrote:
>
> This adds support for the Synopsis DesignWare MIPI DSI v1.01 host
> controller which is embedded in i.MX 6 SoCs.
>
> Based on following patches, but updated/extended to work with existing
> support found in the kernel:
>
> - drm: imx: Support Synopsys DesignWare MIPI DSI host controller
> Signed-off-by: Liu Ying <Ying.Liu@...escale.com>
>
> - ARM: dtsi: imx6qdl: Add support for MIPI DSI host controller
> Signed-off-by: Liu Ying <Ying.Liu@...escale.com>
This one looks like a devicetree patch, but this patch does not touch
devicetree.
> + ret = clk_prepare_enable(dsi->pllref_clk);
> + if (ret) {
> + dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> + return ret;
> + }
> +
> + dsi->mux_sel = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,gpr");
> + if (IS_ERR(dsi->mux_sel)) {
> + ret = PTR_ERR(dsi->mux_sel);
> + dev_err(dev, "%s: Failed to get GPR regmap: %d\n",
> + __func__, ret);
> + return ret;
You should disable the dsi->pllref_clk clock prior to returning the error.
> + dsi->mipi_dsi = dw_mipi_dsi_probe(pdev, pdata);
> + if (IS_ERR(dsi->mipi_dsi)) {
> + ret = PTR_ERR(dsi->mipi_dsi);
> + dev_dbg(dev, "%s: Unable to probe DW DSI host device: %d\n",
> + __func__, ret);
> + return -ENODEV;
Same here. You should disable the clock. Shouldn't you return 'ret'
here instead of -ENODEV?
> +module_platform_driver(imx_mipi_dsi_driver);
> +
> +MODULE_DESCRIPTION("i.MX6 MIPI DSI host controller driver");
> +MODULE_AUTHOR("Liu Ying <Ying.Liu@...escale.com>");
The freescale.com domain is no longer functional.
Ying Liu's NXP address is victor.liu@....com. You could probably add
your entry as well.
Powered by blists - more mailing lists