lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200330145414.GW1922688@smile.fi.intel.com>
Date:   Mon, 30 Mar 2020 17:54:14 +0300
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Heiko Stuebner <heiko@...ech.de>
Cc:     gregkh@...uxfoundation.org, jslaby@...e.com,
        matwey.kornilov@...il.com, linux-serial@...r.kernel.org,
        linux-kernel@...r.kernel.org, lukas@...ner.de,
        christoph.muellner@...obroma-systems.com,
        giulio.benetti@...ronovasrl.com,
        Heiko Stuebner <heiko.stuebner@...obroma-systems.com>
Subject: Re: [PATCH v2 5/7] dt-bindings: serial: Add binding for rs485
 receiver enable GPIO

On Thu, Mar 26, 2020 at 12:14:20AM +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@...obroma-systems.com>
> 
> RS485 has two signals to control transmissions "drivee enable" (RE) and

drivee -> driver ?

> "receiver enable" (DE). RE is already handled via the uarts RTS signal

Typo in abbreviations in parentheses, you probably need to swap them.

> while RE signal on most implementations doesn't get handled separately
> at all.
> 
> As there still will be cases where this is needed though add a gpio
> property for declaring this signal pin.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@...obroma-systems.com>
> ---
>  Documentation/devicetree/bindings/serial/rs485.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
> index a9ad17864889..e55730de796d 100644
> --- a/Documentation/devicetree/bindings/serial/rs485.yaml
> +++ b/Documentation/devicetree/bindings/serial/rs485.yaml
> @@ -44,6 +44,10 @@ properties:
>     description: enables the receiving of data even while sending data.
>     $ref: /schemas/types.yaml#/definitions/flag
>  
> +  rs485-rx-enable-gpios:
> +   description: GPIO to handle a separate RS485 receive enable signal
> +   $ref: /schemas/types.yaml#/definitions/flag
> +
>    rs485-term-gpios:
>      description: GPIO pin to enable RS485 bus termination.
>      maxItems: 1
> -- 
> 2.24.1
> 

-- 
With Best Regards,
Andy Shevchenko


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ