lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200330152711.8769-3-i.mikhaylov@yadro.com>
Date:   Mon, 30 Mar 2020 18:27:11 +0300
From:   Ivan Mikhaylov <i.mikhaylov@...ro.com>
To:     unlisted-recipients:; (no To-header on input)
CC:     Ivan Mikhaylov <i.mikhaylov@...ro.com>,
        Jonathan Cameron <jic23@...nel.org>,
        Hartmut Knaack <knaack.h@....de>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Peter Meerwald-Stadler <pmeerw@...erw.net>,
        <linux-iio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>, Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Andy Shevchenko <andy.shevchenko@...il.com>
Subject: [PATCH v5 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor

Proximity sensor driver based on light/vcnl4000.c code.
For now supports only the single on-demand measurement.

The VCNL3020 is a fully integrated proximity sensor. Fully
integrated means that the infrared emitter is included in the
package. It has 16-bit resolution. It includes a signal
processing IC and features standard I2C communication
interface. It features an interrupt function.

Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@...ro.com>
---
 drivers/iio/proximity/Kconfig    |  11 ++
 drivers/iio/proximity/Makefile   |   1 +
 drivers/iio/proximity/vcnl3020.c | 226 +++++++++++++++++++++++++++++++
 3 files changed, 238 insertions(+)
 create mode 100644 drivers/iio/proximity/vcnl3020.c

diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index d53601447da4..b8d2b17e60ac 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -112,6 +112,17 @@ config SRF08
 	  To compile this driver as a module, choose M here: the
 	  module will be called srf08.
 
+config VCNL3020
+	tristate "VCNL3020 proximity sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VCNL3020
+	  proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vcnl3020.
+
 config VL53L0X_I2C
 	tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
 	depends on I2C
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index 0bb5f9de13d6..8245978ced30 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -12,5 +12,6 @@ obj-$(CONFIG_RFD77402)		+= rfd77402.o
 obj-$(CONFIG_SRF04)		+= srf04.o
 obj-$(CONFIG_SRF08)		+= srf08.o
 obj-$(CONFIG_SX9500)		+= sx9500.o
+obj-$(CONFIG_VCNL3020)		+= vcnl3020.o
 obj-$(CONFIG_VL53L0X_I2C)	+= vl53l0x-i2c.o
 
diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
new file mode 100644
index 000000000000..d4b0684c39fe
--- /dev/null
+++ b/drivers/iio/proximity/vcnl3020.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for Vishay VCNL3020 proximity sensor on i2c bus.
+ * Based on Vishay VCNL4000 driver code.
+ *
+ * TODO: interrupts.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define VCNL_DRV_NAME		"vcnl3020"
+#define VCNL_REGMAP_NAME	"vcnl3020_regmap"
+#define VCNL3020_PROD_ID	0x21
+
+#define VCNL_COMMAND		0x80 /* Command register */
+#define VCNL_PROD_REV		0x81 /* Product ID and Revision ID */
+#define VCNL_PROXIMITY_RATE	0x82 /* Rate of Proximity Measurement */
+#define VCNL_LED_CURRENT	0x83 /* IR LED current for proximity mode */
+#define VCNL_PS_RESULT_HI	0x87 /* Proximity result register, MSB */
+#define VCNL_PS_RESULT_LO	0x88 /* Proximity result register, LSB */
+#define VCNL_PS_ICR		0x89 /* Interrupt Control Register  */
+
+#define VCNL_PS_LO_THR_HI	0x8a /* High byte of low threshold value */
+#define VCNL_PS_LO_THR_LO	0x8b /* Low byte of low threshold value */
+#define VCNL_PS_HI_THR_HI	0x8c /* High byte of high threshold value */
+#define VCNL_PS_HI_THR_LO	0x8d /* Low byte of high threshold value */
+#define VCNL_ISR		0x8e /* Interrupt Status Register */
+#define VCNL_PS_MOD_ADJ		0x8f /* Proximity Modulator Timing Adjustment */
+
+/* Bit masks for COMMAND register */
+#define VCNL_PS_RDY		BIT(5) /* proximity data ready? */
+#define VCNL_PS_OD		BIT(3) /* start on-demand proximity
+					* measurement
+					*/
+
+#define VCNL_ON_DEMAND_TIMEOUT_US	100000
+#define VCNL_POLL_US			20000
+
+/**
+ * struct vcnl3020_data - vcnl3020 specific data.
+ * @regmap:	device register map.
+ * @dev:	vcnl3020 device.
+ * @rev:	revision id.
+ * @lock:	lock for protecting access to device hardware registers.
+ */
+struct vcnl3020_data {
+	struct regmap *regmap;
+	struct device *dev;
+	u8 rev;
+	struct mutex lock;
+};
+
+static int vcnl3020_init(struct vcnl3020_data *data)
+{
+	int rc;
+	unsigned int reg;
+	u32 led_current;
+
+	rc = regmap_read(data->regmap, VCNL_PROD_REV, &reg);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading product revision", rc);
+		return rc;
+	}
+
+	if (reg != VCNL3020_PROD_ID) {
+		dev_err(data->dev,
+			"Product id (%x) did not match vcnl3020 (%x)", reg,
+			VCNL3020_PROD_ID);
+		return -ENODEV;
+	}
+
+	data->rev = reg;
+	mutex_init(&data->lock);
+
+	rc = device_property_read_u32(data->dev, "vishay,led-current-milliamp",
+				      &led_current);
+	if (rc == 0) {
+		rc = regmap_write(data->regmap, VCNL_LED_CURRENT, led_current);
+		if (rc)
+			dev_err(data->dev,
+				"Error (%d) setting LED current", rc);
+	}
+
+	return rc;
+};
+
+static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
+{
+	int rc;
+	unsigned int reg;
+	__be16 res;
+
+	mutex_lock(&data->lock);
+
+	rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD);
+	if (rc)
+		goto err_unlock;
+
+	/* wait for data to become ready */
+	rc = regmap_read_poll_timeout(data->regmap, VCNL_COMMAND, reg,
+				      reg & VCNL_PS_RDY, VCNL_POLL_US,
+				      VCNL_ON_DEMAND_TIMEOUT_US);
+	if (rc) {
+		dev_err(data->dev,
+			"vcnl3020_measure() failed with error (%d)", rc);
+		goto err_unlock;
+	}
+
+	/* high & low result bytes read */
+	rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &res, 2);
+	if (rc)
+		goto err_unlock;
+
+	*val = be16_to_cpu(res);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static const struct iio_chan_spec vcnl3020_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	},
+};
+
+static int vcnl3020_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	int rc;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			rc = vcnl3020_measure_proximity(data, val);
+			if (rc)
+				return rc;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info vcnl3020_info = {
+	.read_raw = vcnl3020_read_raw,
+};
+
+static const struct regmap_config vcnl3020_regmap_config = {
+	.name		= VCNL_REGMAP_NAME,
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= VCNL_PS_MOD_ADJ,
+};
+
+static int vcnl3020_probe(struct i2c_client *client)
+{
+	struct vcnl3020_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int rc;
+
+	regmap = devm_regmap_init_i2c(client, &vcnl3020_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "regmap_init failed!");
+		return PTR_ERR(regmap);
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->regmap = regmap;
+	data->dev = &client->dev;
+
+	rc = vcnl3020_init(data);
+	if (rc)
+		return rc;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &vcnl3020_info;
+	indio_dev->channels = vcnl3020_channels;
+	indio_dev->num_channels = ARRAY_SIZE(vcnl3020_channels);
+	indio_dev->name = VCNL_DRV_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct of_device_id vcnl3020_of_match[] = {
+	{
+		.compatible = "vishay,vcnl3020",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, vcnl3020_of_match);
+
+static struct i2c_driver vcnl3020_driver = {
+	.driver = {
+		.name   = VCNL_DRV_NAME,
+		.of_match_table = vcnl3020_of_match,
+	},
+	.probe_new  = vcnl3020_probe,
+};
+module_i2c_driver(vcnl3020_driver);
+
+MODULE_AUTHOR("Ivan Mikhaylov <i.mikhaylov@...ro.com>");
+MODULE_DESCRIPTION("Vishay VCNL3020 proximity sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.21.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ