| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200331151253.q6ody3erhvsabznz@pengutronix.de>
Date: Tue, 31 Mar 2020 17:12:53 +0200
From: Marco Felsch <m.felsch@...gutronix.de>
To: Robert Foss <robert.foss@...aro.org>
Cc: Dongchun Zhu <dongchun.zhu@...iatek.com>,
Fabio Estevam <festevam@...il.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Sakari Ailus <sakari.ailus@....fi>,
Tomasz Figa <tfiga@...omium.org>, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v6 1/3] media: dt-bindings: ov8856: Document YAML bindings
Hi Robert,
On 20-03-31 15:33, Robert Foss wrote:
> From: Dongchun Zhu <dongchun.zhu@...iatek.com>
>
> This patch adds documentation of device tree in YAML schema for the
> OV8856 CMOS image sensor.
>
> Signed-off-by: Dongchun Zhu <dongchun.zhu@...iatek.com>
> Signed-off-by: Robert Foss <robert.foss@...aro.org>
> ---
>
> - Changes since v5:
> * Add assigned-clocks and assigned-clock-rates
> * robher: dt-schema errors
>
> - Changes since v4:
> * Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description
> * Add clock-lanes property to example
> * robher: Fix syntax error in devicetree example
>
> - Changes since v3:
> * robher: Fix syntax error
> * robher: Removed maxItems
> * Fixes yaml 'make dt-binding-check' errors
>
> - Changes since v2:
> Fixes comments from from Andy, Tomasz, Sakari, Rob.
> * Convert text documentation to YAML schema.
>
> - Changes since v1:
> Fixes comments from Sakari, Tomasz
> * Add clock-frequency and link-frequencies in DT
>
> .../devicetree/bindings/media/i2c/ov8856.yaml | 150 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 151 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> new file mode 100644
> index 000000000000..beeddfbb8709
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> @@ -0,0 +1,150 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2019 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
> +
> +maintainers:
> + - Ben Kao <ben.kao@...el.com>
> + - Dongchun Zhu <dongchun.zhu@...iatek.com>
> +
> +description: |-
> + The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
> + image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
> + sub-sampled, and windowed 10-bit MIPI images in various formats via the
> + Serial Camera Control Bus (SCCB) interface. This chip is programmable
> + through I2C and two-wire SCCB. The sensor output is available via CSI-2
> + serial data output (up to 4-lane).
> +
> +properties:
> + compatible:
> + const: ovti,ov8856
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + description:
> + Input clock for the sensor.
> + items:
> + - const: xvclk
> +
> + clock-frequency:
> + description:
> + Frequency of the xvclk clock in Hertz.
Why do we need this here?
> + assigned-clocks:
> + description:
> + Input clock for the sensor.
> +
> + assigned-clock-rates:
> + description:
> + Frequency of the xvclk clock in Hertz.
Also this isn't related to the chip. You need this because you are using
a qcom platform which provides the clock.
IMHO you only need to specify the clock. You can get the frequency with
the clk_get_rate() function.
> + dovdd-supply:
> + description:
> + Definition of the regulator used as interface power supply.
Phandle to the interface power supply regulator?
> +
> + avdd-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> + dvdd-supply:
> + description:
> + Definition of the regulator used as digital power supply.
> +
> + reset-gpios:
> + description:
> + The phandle and specifier for the GPIO that controls sensor reset.
> + This corresponds to the hardware pin XSHUTDOWN which is physically
> + active low.
> +
> + port:
> + type: object
> + additionalProperties: false
> + description:
> + A node containing input and output port nodes with endpoint definitions
> + as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + maxItems: 1
> +
> + remote-endpoint: true
> +
> + required:
> + - clock-lanes
> + - data-lanes
> + - remote-endpoint
> +
> + required:
> + - endpoint
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - clock-frequency
> + - assigned-clocks
> + - assigned-clock-rates
> + - dovdd-supply
> + - avdd-supply
> + - dvdd-supply
> + - reset-gpios
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/clock/qcom,camcc-sdm845.h>
IMHO we should avoid examples with hardware specific includes.
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ov8856: camera@10 {
> + compatible = "ovti,ov8856";
> + reg = <0x10>;
> +
> + reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&clk_24m_cam>;
> +
> + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
> + clock-names = "xvclk";
> + clock-frequency = <19200000>;
> + assigned-clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
> + assigned-clock-rates = <19200000>;
> +
> + avdd-supply = <&mt6358_vcama2_reg>;
> + dvdd-supply = <&mt6358_vcamd_reg>;
> + dovdd-supply = <&mt6358_vcamio_reg>;
> +
> + port {
> + wcam_out: endpoint {
> + remote-endpoint = <&mipi_in_wcam>;
> + clock-lanes = <0>;
> + data-lanes = <1 2 3 4>;
> + link-frequencies = /bits/ 64 <360000000 180000000>;
Should we add the link-frequencies as optional param?
Regards,
Marco
> + };
> + };
> + };
> + };
> +...
> \ No newline at end of file
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a6fbdf354d34..0f99e863978a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12355,6 +12355,7 @@ L: linux-media@...r.kernel.org
> T: git git://linuxtv.org/media_tree.git
> S: Maintained
> F: drivers/media/i2c/ov8856.c
> +F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml
>
> OMNIVISION OV9650 SENSOR DRIVER
> M: Sakari Ailus <sakari.ailus@...ux.intel.com>
> --
> 2.25.1
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists