linux-kernel - [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed,  1 Apr 2020 00:19:07 +0200
From:   Thierry Reding <thierry.reding@...il.com>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Thierry Reding <thierry.reding@...il.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Jon Hunter <jonathanh@...dia.com>, devicetree@...r.kernel.org,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support

From: Thierry Reding <treding@...dia.com>

This set of patches adds the device tree bindings and a simplified
driver for the timers found on Tegra186 and later SoCs. The driver
itself currently only exposes a couple of clock sources and a
watchdog, which in turn relies on the counter provided by one of
the timers. The timers themselves are not used at the moment because
the SoC also has an architected timer and there's currently no use
for the additional timers provided by this hardware block.

I suggest that patches 1 & 2 go through the clocksource tree, while
I can carry the DTS changes in the Tegra tree for v5.8.

Changes in v2:
- address review comments on the bindings
- make the driver buildable as a module
- support various clock sources

Thierry

Thierry Reding (7):
  dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers
  clocksource: Add Tegra186 timers support
  arm64: tegra: Order nodes by unit-address on Tegra194
  arm64: tegra: Add native timer support on Tegra186
  arm64: tegra: Enable native timers on Jetson TX2
  arm64: tegra: Add native timer support on Tegra194
  arm64: tegra: Enable native timers on Jetson AGX Xavier

 .../bindings/timer/nvidia,tegra186-timer.yaml |  61 +++
 .../arm64/boot/dts/nvidia/tegra186-p3310.dtsi |   4 +
 arch/arm64/boot/dts/nvidia/tegra186.dtsi      |  16 +
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |   4 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |  81 +--
 drivers/clocksource/Kconfig                   |   8 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-tegra186.c          | 505 ++++++++++++++++++
 8 files changed, 648 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
 create mode 100644 drivers/clocksource/timer-tegra186.c

-- 
2.24.1