[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200331085418.807574050@linuxfoundation.org>
Date: Tue, 31 Mar 2020 10:57:24 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Naresh Kamboju <naresh.kamboju@...aro.org>,
Anders Roxell <anders.roxell@...aro.org>,
Faiz Abbas <faiz_abbas@...com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.4 004/155] mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
From: Ulf Hansson <ulf.hansson@...aro.org>
[ Upstream commit 055e04830d4544c57f2a5192a26c9e25915c29c0 ]
It has turned out that the sdhci-omap controller requires the R1B response,
for commands that has this response associated with them. So, converting
from an R1B to an R1 response for a CMD6 for example, leads to problems
with the HW busy detection support.
Fix this by informing the mmc core about the requirement, via setting the
host cap, MMC_CAP_NEED_RSP_BUSY.
Reported-by: Naresh Kamboju <naresh.kamboju@...aro.org>
Reported-by: Anders Roxell <anders.roxell@...aro.org>
Reported-by: Faiz Abbas <faiz_abbas@...com>
Cc: <stable@...r.kernel.org>
Tested-by: Anders Roxell <anders.roxell@...aro.org>
Tested-by: Faiz Abbas <faiz_abbas@...com>
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/mmc/host/sdhci-omap.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 083e7e053c954..d3135249b2e40 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -1134,6 +1134,9 @@ static int sdhci_omap_probe(struct platform_device *pdev)
host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
+ /* R1B responses is required to properly manage HW busy detection. */
+ mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
ret = sdhci_setup_host(host);
if (ret)
goto err_put_sync;
--
2.20.1
Powered by blists - more mailing lists