[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <AM6PR10MB226301829B873FFEFE845FE180C90@AM6PR10MB2263.EURPRD10.PROD.OUTLOOK.COM>
Date: Wed, 1 Apr 2020 10:20:32 +0000
From: Adam Thomson <Adam.Thomson.Opensource@...semi.com>
To: Stefan Riedmueller <s.riedmueller@...tec.de>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>,
Support Opensource <Support.Opensource@...semi.com>
CC: "linux-watchdog@...r.kernel.org" <linux-watchdog@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 3/3] watchdog: da9062: No need to ping manually before
setting timeout
On 26 March 2020 15:02, Stefan Riedmueller wrote:
> There is actually no need to ping the watchdog before disabling it
> during timeout change. Disabling the watchdog already takes care of
> resetting the counter.
>
> This fixes an issue during boot when the userspace watchdog handler takes
> over and the watchdog is already running. Opening the watchdog in this case
> leads to the first ping and directly after that without the required
> heartbeat delay a second ping issued by the set_timeout call. Due to the
> missing delay this resulted in a reset.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@...tec.de>
Thanks for the update:
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@...semi.com>
> ---
> drivers/watchdog/da9062_wdt.c | 5 -----
> 1 file changed, 5 deletions(-)
>
> diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
> index 6d81b1276b87..c5bd075c8b14 100644
> --- a/drivers/watchdog/da9062_wdt.c
> +++ b/drivers/watchdog/da9062_wdt.c
> @@ -66,11 +66,6 @@ static int da9062_wdt_update_timeout_register(struct
> da9062_watchdog *wdt,
> unsigned int regval)
> {
> struct da9062 *chip = wdt->hw;
> - int ret;
> -
> - ret = da9062_reset_watchdog_timer(wdt);
> - if (ret)
> - return ret;
>
> regmap_update_bits(chip->regmap,
> DA9062AA_CONTROL_D,
> --
> 2.23.0
Powered by blists - more mailing lists