| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 2 Apr 2020 15:43:04 -0500
From: Dan Murphy <dmurphy@...com>
To: <jacek.anaszewski@...il.com>, <pavel@....cz>
CC: <linux-leds@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Dan Murphy <dmurphy@...com>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH v19 11/18] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
Add the reg property to each channel node. This update is
to accomodate the multicolor framework. In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.
Signed-off-by: Dan Murphy <dmurphy@...com>
CC: Linus Walleij <linus.walleij@...aro.org>
Acked-by: Pavel Machek <pavel@....cz>
---
arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 33e3b0b3c53d..ff47cbf6ed3b 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -58,16 +58,21 @@ lp5521@33 {
reg = <0x33>;
label = "lp5521_pri";
clock-mode = /bits/ 8 <2>;
- chan0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ chan@0 {
+ reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
linux,default-trigger = "heartbeat";
};
- chan1 {
+ chan@1 {
+ reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan2 {
+ chan@2 {
+ reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
@@ -77,15 +82,20 @@ lp5521@34 {
reg = <0x34>;
label = "lp5521_sec";
clock-mode = /bits/ 8 <2>;
- chan0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ chan@0 {
+ reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan1 {
+ chan@1 {
+ reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan2 {
+ chan@2 {
+ reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
--
2.25.1
Powered by blists - more mailing lists