| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f37d2559-b7ab-9f90-6908-1cd7064deadb@gmail.com>
Date: Fri, 3 Apr 2020 00:57:53 +0200
From: Matthias Brugger <matthias.bgg@...il.com>
To: Henry Yen <henry.yen@...iatek.com>,
Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amit.kucheria@...durent.com>
Cc: linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Steven Liu <steven.liu@...iatek.com>,
Michael Kao <michael.kao@...iatek.com>
Subject: Re: [PATCH 1/2] thermal: mediatek: prepare to add support for other
platforms
On 19/03/2020 10:54, Henry Yen wrote:
> It is known that Mediatek owns two thermal system, which differs
> in the way of reading calibration data and converting temperature.
> MT8173, MT2701, MT2712 and MT8183 belongs to version 1 thermal
> system, and MT7622 belongs to version 2 thermal system.
> For platform compatibility, we add two sensor ops (extract and
> convert) to the thermal data structure. Each platform will register
> the sensor ops to the proper function implementation according to
> its version.
>
> Signed-off-by: Henry Yen <henry.yen@...iatek.com>
> ---
> drivers/thermal/mtk_thermal.c | 148 +++++++++++++++++++++-------------
> 1 file changed, 93 insertions(+), 55 deletions(-)
>
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 76e30603d4d5..13e17c31ba3b 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -120,18 +120,18 @@
> * MT2701 has 3 sensors and needs 3 VTS calibration data.
> * MT2712 has 4 sensors and needs 4 VTS calibration data.
> */
> -#define CALIB_BUF0_VALID BIT(0)
> -#define CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff)
> -#define CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff)
> -#define CALIB_BUF0_VTS_TS2(x) (((x) >> 8) & 0x1ff)
> -#define CALIB_BUF1_VTS_TS3(x) (((x) >> 0) & 0x1ff)
> -#define CALIB_BUF2_VTS_TS4(x) (((x) >> 23) & 0x1ff)
> -#define CALIB_BUF2_VTS_TS5(x) (((x) >> 5) & 0x1ff)
> -#define CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff)
> -#define CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f)
> -#define CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f)
> -#define CALIB_BUF0_O_SLOPE_SIGN(x) (((x) >> 7) & 0x1)
> -#define CALIB_BUF1_ID(x) (((x) >> 9) & 0x1)
> +#define CALIB_BUF0_VALID_V1 BIT(0)
> +#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff)
> +#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff)
> +#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff)
> +#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff)
> +#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff)
> +#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff)
> +#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff)
> +#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f)
> +#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f)
> +#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1)
> +#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1)
>
> enum {
> VTS1,
> @@ -143,6 +143,11 @@ enum {
> MAX_NUM_VTS,
> };
>
> +enum mtk_thermal_version {
> + MTK_THERMAL_V1 = 1,
> + MTK_THERMAL_V2,
> +};
> +
> /* MT2701 thermal sensors */
> #define MT2701_TS1 0
> #define MT2701_TS2 1
> @@ -245,6 +250,9 @@ struct mtk_thermal_data {
> const int *controller_offset;
> bool need_switch_bank;
> struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
> + enum mtk_thermal_version version;
> + int (*extract)(struct mtk_thermal *mt, u32 *buf);
> + int (*convert)(struct mtk_thermal *mt, int sensno, s32 raw);
I wonder if we really
> };
>
> struct mtk_thermal {
> @@ -358,6 +366,9 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
> static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
> static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
>
> +static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf);
> +static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw);
> +
> /*
> * The MT8173 thermal controller has four banks. Each bank can read up to
> * four temperature sensors simultaneously. The MT8173 has a total of 5
> @@ -398,6 +409,9 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
> .msr = mt8173_msr,
> .adcpnp = mt8173_adcpnp,
> .sensor_mux_values = mt8173_mux_values,
> + .version = MTK_THERMAL_V1,
> + .extract = mtk_thermal_extract_efuse_v1,
> + .convert = raw_to_mcelsius_v1,
> };
>
> /*
> @@ -428,6 +442,9 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
> .msr = mt2701_msr,
> .adcpnp = mt2701_adcpnp,
> .sensor_mux_values = mt2701_mux_values,
> + .version = MTK_THERMAL_V1,
> + .extract = mtk_thermal_extract_efuse_v1,
> + .convert = raw_to_mcelsius_v1,
> };
>
> /*
> @@ -458,6 +475,9 @@ static const struct mtk_thermal_data mt2712_thermal_data = {
> .msr = mt2712_msr,
> .adcpnp = mt2712_adcpnp,
> .sensor_mux_values = mt2712_mux_values,
> + .version = MTK_THERMAL_V1,
> + .extract = mtk_thermal_extract_efuse_v1,
> + .convert = raw_to_mcelsius_v1,
> };
>
> /*
> @@ -482,6 +502,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> .msr = mt7622_msr,
> .adcpnp = mt7622_adcpnp,
> .sensor_mux_values = mt7622_mux_values,
> + .version = MTK_THERMAL_V2,
> + .extract = mtk_thermal_extract_efuse_v1,
> + .convert = raw_to_mcelsius_v1,
You are just fixing half of mt7622 here.
>From my understanding MTK_THERMAL_V2 driver allwasy use extract and convert in
version _v2. So we won't need to add the callbacks but could check in the code
depending on .version which funtion to call.
You patch set has some ordering issues. I think you should in a first patch
rename function to _v1. Then in a second patch add actually add .version and _v2
and fix mt7622. The latter should also have a Fixes tag. Not sure if both
patches as they both together actually fix mt7622 driver.
Regards,
Matthias
> };
>
> /*
> @@ -514,6 +537,9 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
> .msr = mt8183_msr,
> .adcpnp = mt8183_adcpnp,
> .sensor_mux_values = mt8183_mux_values,
> + .version = MTK_THERMAL_V1,
> + .extract = mtk_thermal_extract_efuse_v1,
> + .convert = raw_to_mcelsius_v1,
> };
>
> /**
> @@ -525,7 +551,7 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
> * This converts the raw ADC value to mcelsius using the SoC specific
> * calibration constants
> */
> -static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw)
> +static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
> {
> s32 tmp;
>
> @@ -594,9 +620,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
> raw = readl(mt->thermal_base +
> conf->msr[conf->bank_data[bank->id].sensors[i]]);
>
> - temp = raw_to_mcelsius(mt,
> - conf->bank_data[bank->id].sensors[i],
> - raw);
> + temp = conf->convert(mt,
> + conf->bank_data[bank->id].sensors[i],
> + raw);
>
> /*
> * The first read of a sensor often contains very high bogus
> @@ -698,9 +724,11 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
> writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
> controller_base + TEMP_ADCMUXADDR);
>
> - /* AHB address for pnp sensor mux selection */
> - writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
> - controller_base + TEMP_PNPMUXADDR);
> + if (mt->conf->version == MTK_THERMAL_V1) {
> + /* AHB address for pnp sensor mux selection */
> + writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
> + controller_base + TEMP_PNPMUXADDR);
> + }
>
> /* AHB value for auxadc enable */
> writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
> @@ -758,6 +786,51 @@ static u64 of_get_phys_base(struct device_node *np)
> return of_translate_address(np, regaddr_p);
> }
>
> +static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
> +{
> + int i;
> +
> + if (!(buf[0] & CALIB_BUF0_VALID_V1))
> + return -EINVAL;
> +
> + mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
> +
> + for (i = 0; i < mt->conf->num_sensors; i++) {
> + switch (mt->conf->vts_index[i]) {
> + case VTS1:
> + mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
> + break;
> + case VTS2:
> + mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
> + break;
> + case VTS3:
> + mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
> + break;
> + case VTS4:
> + mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
> + break;
> + case VTS5:
> + mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
> + break;
> + case VTSABB:
> + mt->vts[VTSABB] =
> + CALIB_BUF2_VTS_TSABB_V1(buf[2]);
> + break;
> + default:
> + break;
> + }
> + }
> +
> + mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
> + if (CALIB_BUF1_ID_V1(buf[1]) &
> + CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
> + mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
> + else
> + mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
> +
> + return 0;
> +}
> +
> static int mtk_thermal_get_calibration_data(struct device *dev,
> struct mtk_thermal *mt)
> {
> @@ -793,43 +866,8 @@ static int mtk_thermal_get_calibration_data(struct device *dev,
> goto out;
> }
>
> - if (buf[0] & CALIB_BUF0_VALID) {
> - mt->adc_ge = CALIB_BUF1_ADC_GE(buf[1]);
> -
> - for (i = 0; i < mt->conf->num_sensors; i++) {
> - switch (mt->conf->vts_index[i]) {
> - case VTS1:
> - mt->vts[VTS1] = CALIB_BUF0_VTS_TS1(buf[0]);
> - break;
> - case VTS2:
> - mt->vts[VTS2] = CALIB_BUF0_VTS_TS2(buf[0]);
> - break;
> - case VTS3:
> - mt->vts[VTS3] = CALIB_BUF1_VTS_TS3(buf[1]);
> - break;
> - case VTS4:
> - mt->vts[VTS4] = CALIB_BUF2_VTS_TS4(buf[2]);
> - break;
> - case VTS5:
> - mt->vts[VTS5] = CALIB_BUF2_VTS_TS5(buf[2]);
> - break;
> - case VTSABB:
> - mt->vts[VTSABB] = CALIB_BUF2_VTS_TSABB(buf[2]);
> - break;
> - default:
> - break;
> - }
> - }
> -
> - mt->degc_cali = CALIB_BUF0_DEGC_CALI(buf[0]);
> - if (CALIB_BUF1_ID(buf[1]) &
> - CALIB_BUF0_O_SLOPE_SIGN(buf[0]))
> - mt->o_slope = -CALIB_BUF0_O_SLOPE(buf[0]);
> - else
> - mt->o_slope = CALIB_BUF0_O_SLOPE(buf[0]);
> - } else {
> + if (mt->conf->extract(mt, buf))
> dev_info(dev, "Device not calibrated, using default calibration values\n");
> - }
>
> out:
> kfree(buf);
>
Powered by blists - more mailing lists