Message-ID: <3176d7c4-b17b-039f-1f2e-c21449e78086@infradead.org>
Date:   Thu, 2 Apr 2020 00:03:06 -0700
From:   Randy Dunlap <rdunlap@...radead.org>
To:     "Rafael J. Wysocki" <rjw@...ysocki.net>,
        Linux PM <linux-pm@...r.kernel.org>
Cc:     LKML <linux-kernel@...r.kernel.org>,
        Linux Documentation <linux-doc@...r.kernel.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>
Subject: Re: [PATCH] Documentation: PM: sleep: Document system-wide suspend
 code flows

Hi--

Please see edits below:


On 4/1/20 10:59 AM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
> 
> Add a document describing high-level system-wide suspend code flows
> in Linux.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
> ---
>  Documentation/admin-guide/pm/suspend-flows.rst |  270 +++++++++++++++++++++++++
>  Documentation/admin-guide/pm/system-wide.rst   |    1 
>  2 files changed, 271 insertions(+)
> 
> Index: linux-pm/Documentation/admin-guide/pm/suspend-flows.rst
> ===================================================================
> --- /dev/null
> +++ linux-pm/Documentation/admin-guide/pm/suspend-flows.rst
> @@ -0,0 +1,270 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +=========================
> +System Suspend Code Flows
> +=========================
> +
> +:Copyright: |copy| 2020 Intel Corporation
> +
> +:Author: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
> +
> +At least one global system-wide transition needs to be carried out for the
> +system to get from the working state into one of the supported
> +:doc:`sleep states <sleep-states>`.  Hibernation requires more than one
> +transition to occur for this purpose, but the other sleep states, commonly
> +referred to as *system-wide suspend* (or simply *system suspend*) states, need
> +only one.
> +
> +For those sleep states, the transition from the working state of the system into
> +the target sleep state is referred to as *system suspend* too (in the majority
> +of cases, whether this means a transition or a sleep state of the system should
> +be clear from the context) and the transition back from the sleep state into the
> +working state is referred to as *system resume*.
> +
> +The kernel code flows associated with the syspend and resume transitions for

                                             suspend

> +different sleep states of the system are quite similar, but there are some
> +significant differences between the :ref:`suspend-to-idle <s2idle>` code flows
> +and the code flows related to the :ref:`suspend-to-RAM <s2ram>` and
> +:ref:`standby <standby>` sleep states.
> +
> +The :ref:`suspend-to-RAM <s2ram>` and :ref:`standby <standby>` sleep states
> +cannot be implemented without platform support and the difference between them
> +boils down to the platform-specific actions carried out by the suspend and
> +resume hooks that need to be provided by the platform driver to make them
> +available.  Apart from that, the suspend and resume code flows for these sleep
> +states are mostly identical, so they both together will be referred to as
> +*platform-dependent suspend* states in what follows.
> +
> +
> +.. _s2idle_suspend:
> +
> +Suspend-to-idle Suspend Code Flow
> +=================================
> +
> +The following steps are taken in order to transition the system from the working
> +state to the :ref:`suspend-to-idle <s2idle>` sleep state:
> +
> + 1. Invoking system-wide suspend notifiers.
> +
> +    Kernel subsystems can register callbacks to be invoked when the suspend
> +    transition is about to occur and when the resume transition has finished.
> +
> +    That allows them to prepare for the change of the system state and to clean
> +    up after getting back to the working state.
> +
> + 2. Freezing tasks.
> +
> +    Tasks are frozen primarily in order to avoid unchecked hardware accesses
> +    from user space through MMIO regions or I/O registers exposed directly to
> +    it and to prevent user space from entering the kernel while the next step
> +    of the transition is in progress (which might have been problematic for
> +    various reasons).
> +
> +    All user space tasks are intercepted as though they were sent a signal and
> +    put into uninterruptible sleep until the end of the subsequent system resume
> +    transition.
> +
> +    The kernel threads that choose to be frozen during system suspend for
> +    specific reasons are frozen subsequently, but they are not intercepted.
> +    Instead, they are expected to periodically check whether or not they need
> +    to be frozen and to put themselves into uninterruptible sleep if so.  [Note,
> +    however, that kernel threads can use locking and other concurrency controls
> +    available in kernel space to synchronize themselves with system suspend and
> +    resume, which can be much more precise than the freezing, so the latter is
> +    not a recommended option for kernel threads.]
> +
> + 3. Suspending devices and reconfiguring IRQs.
> +
> +    Devices are suspended in four phases called *prepare*, *suspend*,
> +    *late suspend* and *noirq suspend* (see :ref:`driverapi_pm_devices` for more
> +    information on what exactly happens in each phase).
> +
> +    Every device is visited in each phase, but typically it is not physically
> +    accessed in more than two of them.
> +
> +    The runtime PM API is disabled for every device during the *late* suspend
> +    phase and high-level ("action") interrupt handlers are prevented from being
> +    invoked before the *noirq* suspend phase.
> +
> +    Interrupts are still handled after that, but they are only acknowledged to
> +    interrupt controllers without performing any device-specific actions that
> +    would be triggered in the working state of the system (those actions are
> +    deferred till the subsequent system resume transition as described
> +    `below <s2idle_resume_>`_).
> +
> +    IRQs associated with system wakeup devices are "armed" so that the resume
> +    transition of the system is started when one of them signals an event.
> +
> + 4. Freezing the scheduler tick and suspending timekeeping.
> +
> +    When all devices have been suspended, CPUs enter the idle loop and are put
> +    into the deepest available idle state.  While doing that, each of them
> +    "freezes" its own scheduler tick so that the timer events associated with
> +    the tick do not occur until the CPU is woken up by another interrupt source.
> +
> +    The last CPU to enter the idle state also stops the timekeeping which
> +    (among other things) prevents high resolution timers from triggering going
> +    forward until the first CPU that is woken up restarts the timekeeping.
> +    That allows the CPUs to stay in the deep idle state relatively long in one
> +    go.
> +
> +    From this point on, the CPUs can only be woken up by non-timer hardware
> +    interrupts.  If that happens, they go back to the idle state unless the
> +    interrupt that woke up one of them comes from an IRQ that has been armed for
> +    system wakeup, in which case the system resume transition is started.
> +
> +
> +.. _s2idle_resume:
> +
> +Suspend-to-idle Resume Code Flow
> +================================
> +
> +The following steps are taken in order to transition the system from the
> +:ref:`suspend-to-idle <s2idle>` sleep state into the working state:
> +
> + 1. Resuming timekeeping and unfreezing the scheduler tick.
> +
> +    When one of the CPUs is woken up (by a non-timer hardware interrupt), it
> +    leaves the idle state entered in the last step of the preceding suspend
> +    transition, restarts the timekeeping (unless it has been restarted already
> +    by another CPU that woke up earlier) and the scheduler tick on that CPU is
> +    unfrozen.
> +
> +    If the interrupt that has woken up the CPU was armed for system wakeup,
> +    the system resume transition begins.
> +
> + 2. Resuming devices and restoring the working-state configuration of IRQs.
> +
> +    Devices are resumeed in four phases called *noirq resume*, *early resume*,

                   resumed

> +    *resume* and *complete* (see :ref:`driverapi_pm_devices` for more
> +    information on what exactly happens in each phase).
> +
> +    Every device is visited in each phase, but typically it is not physically
> +    accessed in more than two of them.
> +
> +    The working-state configuration of IRQs is restored after the *noirq* resume
> +    phase and the runtime PM API is re-enabled for every device whose driver
> +    supports it during the *early* resume phase.
> +
> + 3. Thawing tasks.
> +
> +    Tasks frozen in step 2 of the preceding `suspend <s2idle_suspend_>`_
> +    transition are "thawed", which means that they are woken up from the
> +    uninterruptible sleep that they went into at that time and user space tasks
> +    are allowed to exit the kernel.
> +
> + 4. Invoking system-wide resume notifiers.
> +
> +    This is analogous to step 1 of the `suspend <s2idle_suspend_>`_ transition
> +    and the same set of callbacks is invoked at this point, but a different
> +    "notification type" parameter value is passed to them.
> +
> +
> +Platform-dependent Suspend Code Flow
> +====================================
> +
> +The following steps are taken in order to transition the system from the working
> +state to platform-dependent suspend state:
> +
> + 1. Invoking system-wide suspend notifiers.
> +
> +    This step is the same as step 1 of the suspend-to-idle suspend transision

                                                                      transition

> +    described `above <s2idle_suspend_>`_.
> +
> + 2. Freezing tasks.
> +
> +    This step is the same as step 2 of the suspend-to-idle suspend transision

                                                                      transition

> +    described `above <s2idle_suspend_>`_.
> +
> + 3. Suspending devices and reconfiguring IRQs.
> +
> +    This step is analogous to step 3 of the suspend-to-idle suspend transision

                                                                       transition

> +    described `above <s2idle_suspend_>`_, but the arming of IRQs for system
> +    wakeup generally does not have any effect on the platform.
> +
> +    There are platforms that can go into a very deep low-power state internally
> +    when all CPUs in them are in sufficiently deep idle states and all I/O
> +    devices have been put into low-power states.  On those platforms,
> +    suspend-to-idle can reduce system power very effectively.
> +
> +    On the other platforms, however, low-level components (like interrupt
> +    controllers) need to be turned off in a platform-specific way (implemented
> +    in the hooks provided by the platform driver) to achieve comparable power
> +    reduction.
> +
> +    That usually prevents in-band hardware interrupts from waking up the system,
> +    which must be done in a special platform-dependent way.  Then, the
> +    configuration of system wakeup sources usually starts when system wakeup
> +    devices are suspended and is finalized by the platform suspend hooks later
> +    on.
> +
> + 4. Disabling non-boot CPUs.
> +
> +    On some platforms the suspend hooks mentioned above must run in a one-CPU
> +    configuration of the system (in particular, the herware cannot be accessed

                                                       hardware

> +    by any code running in parallel with the platform suspend hooks that may,
> +    and often do, trap into the platform firmware in order to finalize the
> +    suspend transition).
> +
> +    For this reason, the CPU offline/online (CPU hotplug) framework is used
> +    to take all of the CPUs in the system, except for one (the boot CPU),
> +    offline (typially, the CPUs that have been taken offline go into deep idle

                typically

> +    states).
> +
> +    This means that all tasks are migrated away from those CPUs and all IRQs are
> +    rerouted to the only CPU that remains online.
> +
> + 5. Suspending core system components.
> +
> +    This prepares the core system components for (possibly) losing power going
> +    forward and suspends the timekeeping.
> +
> + 6. Platform-specific power removal.
> +
> +    This is expected to remove power from all of the system components except
> +    for the mamory controller and RAM (in order to preserve the contents of the

               memory

> +    latter) and some devices designated for system wakeup.
> +
> +    In many cases control is passed to the platform firmware which is expected
> +    to finalize the suspend transition as needed.
> +
> +
> +Platform-dependent Resume Code Flow
> +===================================
> +
> +The following steps are taken in order to transition the system from a
> +platform-dependent suspend state into the working state:
> +
> + 1. Platform-specific system wakeup.
> +
> +    The platform is woken up by a signal from one of the designated system
> +    wakeup devices (which need not be an in-band hardware interrupt)  and
> +    control is passed back to the kernel (the working configuration of the
> +    platform may need to be restored by the platform firmware before the
> +    kernel gets control again).
> +
> + 2. Resuming core system components.
> +
> +    The suspend-time configuration of the core system components is restored and
> +    the timekeeping is resumed.
> +
> + 3. Re-enabling non-boot CPUs.
> +
> +    The CPUs disabled in step 4 of the preceding suspend transition are taken
> +    back online and their suspend-time configuration is restored.
> +
> + 4. Resuming devices and restoring the working-state configuration of IRQs.
> +
> +    This step is the same as step 2 of the suspend-to-idle suspend transision

                                                                      transition

> +    described `above <s2idle_resume_>`_.
> +
> + 5. Thawing tasks.
> +
> +    This step is the same as step 3 of the suspend-to-idle suspend transision

                                                                      transition

> +    described `above <s2idle_resume_>`_.
> +
> + 6. Invoking system-wide resume notifiers.
> +
> +    This step is the same as step 4 of the suspend-to-idle suspend transision

                                                                      transition

> +    described `above <s2idle_resume_>`_.


-- 
~Randy

Powered by blists - more mailing lists