| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 2 Apr 2020 19:28:21 +0200
From: Arnaud POULIQUEN <arnaud.pouliquen@...com>
To: Rishabh Bhatnagar <rishabhb@...eaurora.org>,
<linux-kernel@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>,
<bjorn.andersson@...aro.org>
CC: <psodagud@...eaurora.org>, <tsoni@...eaurora.org>,
<sidgup@...eaurora.org>
Subject: Re: [PATCH v2 1/2] remoteproc: Add character device interface
Hi
On 4/1/20 2:03 AM, Rishabh Bhatnagar wrote:
> Add the character device interface for userspace applications.
> This interface can be used in order to boot up and shutdown
> remote subsystems. Currently there is only a sysfs interface
> which the userspace clients can use. If a usersapce application
> crashes after booting the remote processor does not get any
> indication about the crash. It might still assume that the
> application is running. For example modem uses remotefs service
> to fetch data from disk/flash memory. If the remotefs service
> crashes, modem keeps on requesting data which might lead to a
> crash. Adding a character device interface makes the remote
> processor tightly coupled with the user space application.
> A crash of the application leads to a close on the file descriptors
> therefore shutting down the remoteproc.
Sorry I'm late in the discussion, I hope I've gone through the whole
discussion so I don't reopen a closed point...
Something here is not crystal clear to me so I'd rather share it...
I suppose that you the automatic restart of the application is not possible to
stop and restart the remote processor...
Why this use case can not be solved by a process monitor or a service
in userland that detects the application crash and stop the remote firmware using
the sysfs interface?
I just want to be sure that there is no alternative to this, because having two ways
for application to shutdown the firmware seems to me confusing...
What about the opposite service, mean inform the application that the remote
processor is crashed?
Do you identify such need? or the "auto" crash recovery is sufficient?
Thanks,
Arnaud
>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@...eaurora.org>
> ---
> drivers/remoteproc/Kconfig | 9 +++
> drivers/remoteproc/Makefile | 1 +
> drivers/remoteproc/remoteproc_cdev.c | 100 +++++++++++++++++++++++++++++++
> drivers/remoteproc/remoteproc_internal.h | 22 +++++++
> include/linux/remoteproc.h | 2 +
> 5 files changed, 134 insertions(+)
> create mode 100644 drivers/remoteproc/remoteproc_cdev.c
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index de3862c..6374b79 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -14,6 +14,15 @@ config REMOTEPROC
>
> if REMOTEPROC
>
> +config REMOTEPROC_CDEV
> + bool "Remoteproc character device interface"
> + help
> + Say y here to have a character device interface for Remoteproc
> + framework. Userspace can boot/shutdown remote processors through
> + this interface.
> +
> + It's safe to say N if you don't want to use this interface.
> +
> config IMX_REMOTEPROC
> tristate "IMX6/7 remoteproc support"
> depends on ARCH_MXC
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index e30a1b1..b7d4f77 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -9,6 +9,7 @@ remoteproc-y += remoteproc_debugfs.o
> remoteproc-y += remoteproc_sysfs.o
> remoteproc-y += remoteproc_virtio.o
> remoteproc-y += remoteproc_elf_loader.o
> +obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
> obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
> obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
> obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
> diff --git a/drivers/remoteproc/remoteproc_cdev.c b/drivers/remoteproc/remoteproc_cdev.c
> new file mode 100644
> index 0000000..8182bd1
> --- /dev/null
> +++ b/drivers/remoteproc/remoteproc_cdev.c
> @@ -0,0 +1,100 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Character device interface driver for Remoteproc framework.
> + *
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/cdev.h>
> +#include <linux/fs.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/remoteproc.h>
> +
> +#include "remoteproc_internal.h"
> +
> +#define NUM_RPROC_DEVICES 64
> +static dev_t rproc_cdev;
> +static DEFINE_IDA(cdev_minor_ida);
> +
> +static int rproc_cdev_open(struct inode *inode, struct file *file)
> +{
> + struct rproc *rproc;
> +
> + rproc = container_of(inode->i_cdev, struct rproc, char_dev);
> +
> + if (!rproc)
> + return -EINVAL;
> +
> + if (rproc->state == RPROC_RUNNING)
> + return -EBUSY;
> +
> + return rproc_boot(rproc);
> +}
> +
> +static int rproc_cdev_release(struct inode *inode, struct file *file)
> +{
> + struct rproc *rproc;
> +
> + rproc = container_of(inode->i_cdev, struct rproc, char_dev);
> +
> + if (!rproc || rproc->state != RPROC_RUNNING)
> + return -EINVAL;
> +
> + rproc_shutdown(rproc);
> +
> + return 0;
> +}
> +
> +static const struct file_operations rproc_fops = {
> + .open = rproc_cdev_open,
> + .release = rproc_cdev_release,
> +};
> +
> +int rproc_char_device_add(struct rproc *rproc)
> +{
> + int ret, minor;
> + dev_t cdevt;
> +
> + minor = ida_simple_get(&cdev_minor_ida, 0, NUM_RPROC_DEVICES,
> + GFP_KERNEL);
> + if (minor < 0) {
> + dev_err(&rproc->dev, "%s: No more minor numbers left! rc:%d\n",
> + __func__, minor);
> + return -ENODEV;
> + }
> +
> + cdev_init(&rproc->char_dev, &rproc_fops);
> + rproc->char_dev.owner = THIS_MODULE;
> +
> + cdevt = MKDEV(MAJOR(rproc_cdev), minor);
> + ret = cdev_add(&rproc->char_dev, cdevt, 1);
> + if (ret < 0)
> + ida_simple_remove(&cdev_minor_ida, minor);
> +
> + rproc->dev.devt = cdevt;
> + return ret;
> +}
> +
> +void rproc_char_device_remove(struct rproc *rproc)
> +{
> + __unregister_chrdev(MAJOR(rproc->dev.devt), MINOR(rproc->dev.devt), 1,
> + "rproc");
> + ida_simple_remove(&cdev_minor_ida, MINOR(rproc->dev.devt));
> +}
> +
> +void __init rproc_init_cdev(void)
> +{
> + int ret;
> +
> + ret = alloc_chrdev_region(&rproc_cdev, 0, NUM_RPROC_DEVICES, "rproc");
> + if (ret < 0) {
> + pr_err("Failed to alloc rproc_cdev region, err %d\n", ret);
> + return;
> + }
> +}
> +
> +void __exit rproc_exit_cdev(void)
> +{
> + __unregister_chrdev(MAJOR(rproc_cdev), 0, NUM_RPROC_DEVICES, "rproc");
> +}
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 493ef92..28d61a1 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -47,6 +47,27 @@ struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
> int rproc_init_sysfs(void);
> void rproc_exit_sysfs(void);
>
> +#ifdef CONFIG_REMOTEPROC_CDEV
> +void rproc_init_cdev(void);
> +void rproc_exit_cdev(void);
> +int rproc_char_device_add(struct rproc *rproc);
> +void rproc_char_device_remove(struct rproc *rproc);
> +#else
> +static inline void rproc_init_cdev(void)
> +{
> +}
> +static inline void rproc_exit_cdev(void)
> +{
> +}
> +static inline int rproc_char_device_add(struct rproc *rproc)
> +{
> + return 0;
> +}
> +static inline void rproc_char_device_remove(struct rproc *rproc)
> +{
> +}
> +#endif
> +
> void rproc_free_vring(struct rproc_vring *rvring);
> int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
>
> @@ -63,6 +84,7 @@ struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
> struct rproc_mem_entry *
> rproc_find_carveout_by_name(struct rproc *rproc, const char *name, ...);
>
> +
> static inline
> int rproc_fw_sanity_check(struct rproc *rproc, const struct firmware *fw)
> {
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 16ad666..c4ca796 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -37,6 +37,7 @@
>
> #include <linux/types.h>
> #include <linux/mutex.h>
> +#include <linux/cdev.h>
> #include <linux/virtio.h>
> #include <linux/completion.h>
> #include <linux/idr.h>
> @@ -514,6 +515,7 @@ struct rproc {
> bool auto_boot;
> struct list_head dump_segments;
> int nb_vdev;
> + struct cdev char_dev;
> };
>
> /**
>
Powered by blists - more mailing lists