| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200403233327.GB6127@valkosipuli.retiisi.org.uk>
Date: Sat, 4 Apr 2020 02:33:27 +0300
From: Sakari Ailus <sakari.ailus@....fi>
To: Robert Foss <robert.foss@...aro.org>
Cc: Dongchun Zhu <dongchun.zhu@...iatek.com>,
Fabio Estevam <festevam@...il.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Tomasz Figa <tfiga@...omium.org>, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 2/3] media: ov8856: Add devicetree support
Hi Robert,
On Tue, Mar 31, 2020 at 03:33:45PM +0200, Robert Foss wrote:
> Add devicetree match table, and enable ov8856_probe()
> to initialize power, clocks and reset pins.
>
> Signed-off-by: Robert Foss <robert.foss@...aro.org>
> ---
>
> - Changes since v2:
> * Added "struct device *dev" member to struct ov8856
> * Andy: Switch to optional version of devm_gpiod_get
> * Andy: Switch to optional version of devm_clk_get
> * Fabio: Add reset sleep period
> * Sakari: Unify defines for 19.2Mhz
> * Sakari: Remove 24Mhz clock, since it isn't needed for supported modes
> * Sakari: Replace dev_info() with dev_dbg()
> * Sakari: Switch induction variable type to unsigned
> * Sakari: Don't wait for reset_gpio when in ACPI mode
> * Sakari: Pull reset GPIO high on power on failure
> * Sakari: Add power on/off to resume/suspend
> * Sakari: Fix indentation
> * Sakari: Power off during ov8856_remove()
> * Sakari: Don't sleep during power-on in ACPI mode
> * Sakari: Switch to getting xvclk from clk_get_rate
>
> - Changes since v1:
> * Andy & Sakari: Make XVCLK optional since to not break ACPI
> * Fabio: Change n_shutdown_gpio name to reset_gpio
> * Fabio: Invert reset_gpio due to GPIO_ACTIVE_HIGH -> GPIO_ACTIVE_LOW change
> * Fabio: Remove empty line
> * Fabio: Remove real error from devm_gpiod_get() failures
> * Sakari: ARRAY_SIZE() directly instead of through OV8856_NUM_SUPPLIES
> * Sakari: Use XVCLK rate as provided by DT
>
> drivers/media/i2c/ov8856.c | 141 ++++++++++++++++++++++++++++++++-----
> 1 file changed, 125 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
> index 8655842af275..260aaf332631 100644
> --- a/drivers/media/i2c/ov8856.c
> +++ b/drivers/media/i2c/ov8856.c
> @@ -3,10 +3,13 @@
>
> #include <asm/unaligned.h>
> #include <linux/acpi.h>
> +#include <linux/clk.h>
> #include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
> #include <media/v4l2-fwnode.h>
> @@ -18,7 +21,7 @@
> #define OV8856_LINK_FREQ_360MHZ 360000000ULL
> #define OV8856_LINK_FREQ_180MHZ 180000000ULL
> #define OV8856_SCLK 144000000ULL
> -#define OV8856_MCLK 19200000
> +#define OV8856_XVCLK_19_2 19200000
> #define OV8856_DATA_LANES 4
> #define OV8856_RGB_DEPTH 10
>
> @@ -64,6 +67,12 @@
>
> #define to_ov8856(_sd) container_of(_sd, struct ov8856, sd)
>
> +static const char * const ov8856_supply_names[] = {
> + "dovdd", /* Digital I/O power */
> + "avdd", /* Analog power */
> + "dvdd", /* Digital core power */
> +};
> +
> enum {
> OV8856_LINK_FREQ_720MBPS,
> OV8856_LINK_FREQ_360MBPS,
> @@ -566,6 +575,11 @@ struct ov8856 {
> struct media_pad pad;
> struct v4l2_ctrl_handler ctrl_handler;
>
> + struct device *dev;
> + struct clk *xvclk;
> + struct gpio_desc *reset_gpio;
> + struct regulator_bulk_data supplies[ARRAY_SIZE(ov8856_supply_names)];
> +
> /* V4L2 Controls */
> struct v4l2_ctrl *link_freq;
> struct v4l2_ctrl *pixel_rate;
> @@ -908,6 +922,52 @@ static int ov8856_set_stream(struct v4l2_subdev *sd, int enable)
> return ret;
> }
>
> +static int __ov8856_power_on(struct ov8856 *ov8856)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> + int ret;
> +
> + ret = clk_prepare_enable(ov8856->xvclk);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to enable xvclk\n");
> + return ret;
> + }
> +
> + if (is_acpi_node(ov8856->dev->fwnode))
> + return 0;
> +
> + if (ov8856->reset_gpio) {
> + gpiod_set_value_cansleep(ov8856->reset_gpio, GPIOD_OUT_HIGH);
> + usleep_range(1000, 2000);
> + }
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(ov8856_supply_names),
> + ov8856->supplies);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to enable regulators\n");
> + goto disable_clk;
> + }
> +
> + gpiod_set_value_cansleep(ov8856->reset_gpio, GPIOD_OUT_LOW);
> + usleep_range(1500, 1800);
> +
> + return 0;
> +
> +disable_clk:
> + gpiod_set_value_cansleep(ov8856->reset_gpio, GPIOD_OUT_HIGH);
> + clk_disable_unprepare(ov8856->xvclk);
> +
> + return ret;
> +}
> +
> +static void __ov8856_power_off(struct ov8856 *ov8856)
> +{
> + gpiod_set_value_cansleep(ov8856->reset_gpio, GPIOD_OUT_HIGH);
> + regulator_bulk_disable(ARRAY_SIZE(ov8856_supply_names),
> + ov8856->supplies);
> + clk_disable_unprepare(ov8856->xvclk);
> +}
> +
> static int __maybe_unused ov8856_suspend(struct device *dev)
> {
> struct i2c_client *client = to_i2c_client(dev);
> @@ -918,6 +978,7 @@ static int __maybe_unused ov8856_suspend(struct device *dev)
> if (ov8856->streaming)
> ov8856_stop_streaming(ov8856);
>
> + __ov8856_power_off(ov8856);
> mutex_unlock(&ov8856->mutex);
>
> return 0;
> @@ -931,6 +992,8 @@ static int __maybe_unused ov8856_resume(struct device *dev)
> int ret;
>
> mutex_lock(&ov8856->mutex);
> +
> + __ov8856_power_on(ov8856);
> if (ov8856->streaming) {
> ret = ov8856_start_streaming(ov8856);
> if (ret) {
> @@ -1092,27 +1155,52 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
> return 0;
> }
>
> -static int ov8856_check_hwcfg(struct device *dev)
> +static int ov8856_get_hwcfg(struct ov8856 *ov8856)
> {
> + struct device *dev = ov8856->dev;
> struct fwnode_handle *ep;
> struct fwnode_handle *fwnode = dev_fwnode(dev);
> struct v4l2_fwnode_endpoint bus_cfg = {
> .bus_type = V4L2_MBUS_CSI2_DPHY
> };
> - u32 mclk;
> + unsigned long xvclk_rate;
> int ret;
> unsigned int i, j;
>
> if (!fwnode)
> return -ENXIO;
>
> - ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
> - if (ret)
> - return ret;
You'll still need to continue reading the clock-frequency property on ACPI
systems, and assume that frequency (as you won't have the clock object).
> + ov8856->xvclk = devm_clk_get_optional(dev, "xvclk");
> + if (IS_ERR(ov8856->xvclk)) {
> + dev_err(dev, "could not get xvclk clock (%ld)\n",
> + PTR_ERR(ov8856->xvclk));
> + return PTR_ERR(ov8856->xvclk);
> + }
>
> - if (mclk != OV8856_MCLK) {
> - dev_err(dev, "external clock %d is not supported", mclk);
> - return -EINVAL;
> + if (ov8856->xvclk) {
> + xvclk_rate = clk_get_rate(ov8856->xvclk);
> + if (xvclk_rate != OV8856_XVCLK_19_2) {
> + dev_err(dev, "external clock %lu is not supported",
> + xvclk_rate);
> + return -EINVAL;
> + }
> + }
> +
> + ov8856->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(ov8856->reset_gpio)) {
> + dev_dbg(dev, "failed to get reset-gpio\n");
> + return PTR_ERR(ov8856->reset_gpio);
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(ov8856_supply_names); i++)
> + ov8856->supplies[i].supply = ov8856_supply_names[i];
> +
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ov8856_supply_names),
> + ov8856->supplies);
> + if (ret) {
> + dev_warn(dev, "failed to get regulators\n");
> + return ret;
> }
>
> ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
> @@ -1169,6 +1257,8 @@ static int ov8856_remove(struct i2c_client *client)
> pm_runtime_disable(&client->dev);
> mutex_destroy(&ov8856->mutex);
>
> + __ov8856_power_off(ov8856);
> +
> return 0;
> }
>
> @@ -1177,22 +1267,31 @@ static int ov8856_probe(struct i2c_client *client)
> struct ov8856 *ov8856;
> int ret;
>
> - ret = ov8856_check_hwcfg(&client->dev);
> + ov8856 = devm_kzalloc(&client->dev, sizeof(*ov8856), GFP_KERNEL);
> + if (!ov8856)
> + return -ENOMEM;
> + ov8856->dev = &client->dev;
> +
> + ov8856->dev = &client->dev;
What happened here? :-)
I think this patch is starting to look quite reasonable.
> + ret = ov8856_get_hwcfg(ov8856);
> if (ret) {
> - dev_err(&client->dev, "failed to check HW configuration: %d",
> + dev_err(&client->dev, "failed to get HW configuration: %d",
> ret);
> return ret;
> }
>
> - ov8856 = devm_kzalloc(&client->dev, sizeof(*ov8856), GFP_KERNEL);
> - if (!ov8856)
> - return -ENOMEM;
> -
> v4l2_i2c_subdev_init(&ov8856->sd, client, &ov8856_subdev_ops);
> +
> + ret = __ov8856_power_on(ov8856);
> + if (ret) {
> + dev_warn(&client->dev, "failed to power on\n");
> + return ret;
> + }
> +
> ret = ov8856_identify_module(ov8856);
> if (ret) {
> dev_err(&client->dev, "failed to find sensor: %d", ret);
> - return ret;
> + goto probe_power_off;
> }
>
> mutex_init(&ov8856->mutex);
> @@ -1238,6 +1337,9 @@ static int ov8856_probe(struct i2c_client *client)
> v4l2_ctrl_handler_free(ov8856->sd.ctrl_handler);
> mutex_destroy(&ov8856->mutex);
>
> +probe_power_off:
> + __ov8856_power_off(ov8856);
> +
> return ret;
> }
>
> @@ -1254,11 +1356,18 @@ static const struct acpi_device_id ov8856_acpi_ids[] = {
> MODULE_DEVICE_TABLE(acpi, ov8856_acpi_ids);
> #endif
>
> +static const struct of_device_id ov8856_of_match[] = {
> + { .compatible = "ovti,ov8856" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ov8856_of_match);
> +
> static struct i2c_driver ov8856_i2c_driver = {
> .driver = {
> .name = "ov8856",
> .pm = &ov8856_pm_ops,
> .acpi_match_table = ACPI_PTR(ov8856_acpi_ids),
> + .of_match_table = ov8856_of_match,
> },
> .probe_new = ov8856_probe,
> .remove = ov8856_remove,
--
Regards,
Sakari Ailus
Powered by blists - more mailing lists