linux-kernel - [PATCH] net: dsa: mt7530: fix null pointer dereferencing in port5 setup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200403112830.505720-1-gch981213@gmail.com>
Date:   Fri,  3 Apr 2020 19:28:24 +0800
From:   Chuanhong Guo <gch981213@...il.com>
To:     netdev@...r.kernel.org
Cc:     Chuanhong Guo <gch981213@...il.com>, stable@...r.kernel.org,
        Sean Wang <sean.wang@...iatek.com>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Matthias Brugger <matthias.bgg@...il.com>,
        René van Dorst <opensource@...rst.com>,
        Russell King <rmk+kernel@...linux.org.uk>,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] net: dsa: mt7530: fix null pointer dereferencing in port5 setup

The 2nd gmac of mediatek soc ethernet may not be connected to a PHY
and a phy-handle isn't always available.
Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always
connected to switch port 5 and setup mt7530 according to phy address
of 2nd gmac node, causing null pointer dereferencing when phy-handle
isn't defined in dts.
This commit fix this setup code by checking return value of
of_parse_phandle before using it.

Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Chuanhong Guo <gch981213@...il.com>
Cc: stable@...r.kernel.org
---

mt7530 is available as a standalone chip and we should not make it
tightly coupled with a specific type of ethernet dt binding in the
first place.
A proper fix is to replace this port detection logic with a dt
property under mt7530 node, but that's too much for linux-stable.

 drivers/net/dsa/mt7530.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 6e91fe2f4b9a..1d53a4ebcd5a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1414,6 +1414,9 @@ mt7530_setup(struct dsa_switch *ds)
 				continue;

 			phy_node = of_parse_phandle(mac_np, "phy-handle", 0);
+			if (!phy_node)
+				continue;
+
 			if (phy_node->parent == priv->dev->of_node->parent) {
 				ret = of_get_phy_mode(mac_np, &interface);
 				if (ret && ret != -ENODEV)
-- 
2.25.1