[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1586122974-22125-2-git-send-email-sean.wang@mediatek.com>
Date: Mon, 6 Apr 2020 05:42:54 +0800
From: <sean.wang@...iatek.com>
To: <davem@...emloft.net>, <andrew@...n.ch>, <f.fainelli@...il.com>,
<vivien.didelot@...oirfairelinux.com>, <Mark-MC.Lee@...iatek.com>,
<john@...ozen.org>
CC: <Landen.Chao@...iatek.com>, <steven.liu@...iatek.com>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>,
René van Dorst <opensource@...rst.com>
Subject: [PATCH v2 net 2/2] net: ethernet: mediatek: move mt7623 settings out off the mt7530
From: René van Dorst <opensource@...rst.com>
Moving mt7623 logic out off mt7530, is required to make hardware setting
consistent after we introduce phylink to mtk driver.
Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Reviewed-by: Sean Wang <sean.wang@...iatek.com>
Tested-by: Sean Wang <sean.wang@...iatek.com>
Signed-off-by: René van Dorst <opensource@...rst.com>
---
v1 -> v2: split out logic changing mtk_gmac0_rgmii_adjust that should be
refined further and actualy belonged to separate patch.
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 24 ++++++++++++++++++++-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 +++++++
2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8d28f90acfe7..09047109d0da 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -65,6 +65,17 @@ u32 mtk_r32(struct mtk_eth *eth, unsigned reg)
return __raw_readl(eth->base + reg);
}
+u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned reg)
+{
+ u32 val;
+
+ val = mtk_r32(eth, reg);
+ val &= ~mask;
+ val |= set;
+ mtk_w32(eth, val, reg);
+ return reg;
+}
+
static int mtk_mdio_busy_wait(struct mtk_eth *eth)
{
unsigned long t_start = jiffies;
@@ -193,7 +204,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
struct mtk_mac *mac = container_of(config, struct mtk_mac,
phylink_config);
struct mtk_eth *eth = mac->hw;
- u32 mcr_cur, mcr_new, sid;
+ u32 mcr_cur, mcr_new, sid, i;
int val, ge_mode, err;
/* MT76x8 has no hardware settings between for the MAC */
@@ -255,6 +266,17 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
PHY_INTERFACE_MODE_TRGMII)
mtk_gmac0_rgmii_adjust(mac->hw,
state->speed);
+
+ /* mt7623_pad_clk_setup */
+ for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
+ mtk_w32(mac->hw,
+ TD_DM_DRVP(8) | TD_DM_DRVN(8),
+ TRGMII_TD_ODT(i));
+
+ /* Assert/release MT7623 RXC reset */
+ mtk_m32(mac->hw, 0, RXC_RST | RXC_DQSISEL,
+ TRGMII_RCK_CTRL);
+ mtk_m32(mac->hw, RXC_RST, 0, TRGMII_RCK_CTRL);
}
}
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 85830fe14a1b..454cfcd465fd 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -352,10 +352,13 @@
#define DQSI0(x) ((x << 0) & GENMASK(6, 0))
#define DQSI1(x) ((x << 8) & GENMASK(14, 8))
#define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
+#define RXC_RST BIT(31)
#define RXC_DQSISEL BIT(30)
#define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16))
#define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2)
+#define NUM_TRGMII_CTRL 5
+
/* TRGMII RXC control register */
#define TRGMII_TCK_CTRL 0x10340
#define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
@@ -363,6 +366,11 @@
#define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2)
#define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2))
+/* TRGMII TX Drive Strength */
+#define TRGMII_TD_ODT(i) (0x10354 + 8 * (i))
+#define TD_DM_DRVP(x) ((x) & 0xf)
+#define TD_DM_DRVN(x) (((x) & 0xf) << 4)
+
/* TRGMII Interface mode register */
#define INTF_MODE 0x10390
#define TRGMII_INTF_DIS BIT(0)
--
2.25.1
Powered by blists - more mailing lists