| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200406103127.17105-1-hyunki00.koo@samsung.com>
Date: Mon, 6 Apr 2020 19:31:25 +0900
From: Hyunki Koo <hyunki00.koo@...sung.com>
To: gregkh@...uxfoundation.org, krzk@...nel.org
Cc: Hyunki Koo <hyunki00.koo@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Kukjin Kim <kgene@...nel.org>, Jiri Slaby <jslaby@...e.com>,
linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org
Subject: [PATCH v5 2/2] tty: samsung_tty: 32-bit access for TX/RX hold
registers
Support 32-bit access for the TX/RX hold registers UTXH and URXH.
This is required for some newer SoCs.
Signed-off-by: Hyunki Koo <hyunki00.koo@...sung.com>
---
v2:
line 954 : change rd_regl to rd_reg in for backward compatibility.
line 2031: Add init value for ourport->port.iotype to UPIO_MEM
v3:
line 2031: remove redundant init value for ourport->port.iotype
v4:
correct variable types and change misleading function name
v5:
add dt-binding and go as first patch in this series.
---
drivers/tty/serial/samsung_tty.c | 76 +++++++++++++++++++++++++++++++++-------
1 file changed, 64 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 73f951d65b93..bdf1d4d12cb1 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -154,12 +154,47 @@ struct s3c24xx_uart_port {
#define portaddrl(port, reg) \
((unsigned long *)(unsigned long)((port)->membase + (reg)))
-#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
+static u32 rd_reg(struct uart_port *port, u32 reg)
+{
+ switch (port->iotype) {
+ case UPIO_MEM:
+ return readb_relaxed(portaddr(port, reg));
+ case UPIO_MEM32:
+ return readl_relaxed(portaddr(port, reg));
+ default:
+ return 0;
+ }
+ return 0;
+}
+
#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
-#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+static void wr_reg(struct uart_port *port, u32 reg, u32 val)
+{
+ switch (port->iotype) {
+ case UPIO_MEM:
+ writeb_relaxed(val, portaddr(port, reg));
+ break;
+ case UPIO_MEM32:
+ writel_relaxed(val, portaddr(port, reg));
+ break;
+ }
+}
+
#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
+static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
+{
+ switch (port->iotype) {
+ case UPIO_MEM:
+ writeb(val, portaddr(port, reg));
+ break;
+ case UPIO_MEM32:
+ writel(val, portaddr(port, reg));
+ break;
+ }
+}
+
/* Byte-order aware bit setting/clearing functions. */
static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
@@ -714,7 +749,7 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
fifocnt--;
uerstat = rd_regl(port, S3C2410_UERSTAT);
- ch = rd_regb(port, S3C2410_URXH);
+ ch = rd_reg(port, S3C2410_URXH);
if (port->flags & UPF_CONS_FLOW) {
int txe = s3c24xx_serial_txempty_nofifo(port);
@@ -826,7 +861,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
}
if (port->x_char) {
- wr_regb(port, S3C2410_UTXH, port->x_char);
+ wr_reg(port, S3C2410_UTXH, port->x_char);
port->icount.tx++;
port->x_char = 0;
goto out;
@@ -852,7 +887,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
break;
- wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+ wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
count--;
@@ -916,7 +951,7 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
/* no modem control lines */
static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
{
- unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
+ unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
if (umstat & S3C2410_UMSTAT_CTS)
return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
@@ -1974,7 +2009,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct s3c24xx_uart_port *ourport;
int index = probe_index;
- int ret;
+ int ret, prop = 0;
if (np) {
ret = of_alias_get_id(np, "serial");
@@ -2000,10 +2035,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
dev_get_platdata(&pdev->dev) :
ourport->drv_data->def_cfg;
- if (np)
+ if (np) {
of_property_read_u32(np,
"samsung,uart-fifosize", &ourport->port.fifosize);
+ if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+ switch (prop) {
+ case 1:
+ ourport->port.iotype = UPIO_MEM;
+ break;
+ case 4:
+ ourport->port.iotype = UPIO_MEM32;
+ break;
+ default:
+ dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
+ prop);
+ ret = -EINVAL;
+ break;
+ }
+ }
+ }
+
if (ourport->drv_data->fifosize[index])
ourport->port.fifosize = ourport->drv_data->fifosize[index];
else if (ourport->info->fifosize)
@@ -2185,7 +2237,7 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port)
if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
return NO_POLL_CHAR;
- return rd_regb(port, S3C2410_URXH);
+ return rd_reg(port, S3C2410_URXH);
}
static void s3c24xx_serial_put_poll_char(struct uart_port *port,
@@ -2200,7 +2252,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
- wr_regb(port, S3C2410_UTXH, c);
+ wr_reg(port, S3C2410_UTXH, c);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -2212,7 +2264,7 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
- wr_regb(port, S3C2410_UTXH, ch);
+ wr_reg(port, S3C2410_UTXH, ch);
}
static void
@@ -2612,7 +2664,7 @@ static void samsung_early_putc(struct uart_port *port, int c)
else
samsung_early_busyuart(port);
- writeb(c, port->membase + S3C2410_UTXH);
+ wr_reg_barrier(port, S3C2410_UTXH, c);
}
static void samsung_early_write(struct console *con, const char *s,
--
2.15.0.rc1
Powered by blists - more mailing lists