[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200406165115.25586-1-pthomas8589@gmail.com>
Date: Mon, 6 Apr 2020 12:51:15 -0400
From: Paul Thomas <pthomas8589@...il.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Paul Thomas <pthomas8589@...il.com>
Subject: [PATCH] gpio: gpio-pca953x, Add get_multiple function
Implement a get_multiple function for gpio-pca953x. If a driver
leaves get_multiple unimplemented then gpio_chip_get_multiple()
in gpiolib.c takes care of it by calling chip->get() as needed.
For i2c chips this is very inefficient. For example if you do an
8-bit read then instead of a single i2c transaction there are
8 transactions reading the same byte!
This has been tested with max7312 chips on a 5.2 kernel.
Signed-off-by: Paul Thomas <pthomas8589@...il.com>
---
drivers/gpio/gpio-pca953x.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 96d42f571a18..705115bde740 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -114,6 +114,7 @@ MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
#define MAX_BANK 5
#define BANK_SZ 8
+#define BANK_SFT 3 /* ilog2(BANK_SZ) */
#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
@@ -451,6 +452,41 @@ static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
return !!(reg_val & bit);
}
+static int pca953x_gpio_get_multiple(struct gpio_chip *gc,
+ unsigned long *mask, unsigned long *bits)
+{
+ struct pca953x_chip *chip = gpiochip_get_data(gc);
+ unsigned int reg_val;
+ int offset, value, i, ret = 0;
+ u8 inreg;
+
+ /* Force offset outside the range of i so that
+ * at least the first relevant register is read
+ */
+ offset = gc->ngpio;
+ for_each_set_bit(i, mask, gc->ngpio) {
+ /* whenever i goes into a new bank update inreg
+ * and read the register
+ */
+ if ((offset >> BANK_SFT) != (i >> BANK_SFT)) {
+ offset = i;
+ inreg = pca953x_recalc_addr(chip, chip->regs->input,
+ offset, true, false);
+ mutex_lock(&chip->i2c_lock);
+ ret = regmap_read(chip->regmap, inreg, ®_val);
+ mutex_unlock(&chip->i2c_lock);
+ if (ret < 0)
+ return ret;
+ }
+ /* reg_val is relative to the last read byte,
+ * so only shift the relative bits
+ */
+ value = (reg_val >> (i % 8)) & 0x01;
+ __assign_bit(i, bits, value);
+ }
+ return ret;
+}
+
static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits)
{
@@ -547,6 +583,7 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
gc->get = pca953x_gpio_get_value;
gc->set = pca953x_gpio_set_value;
gc->get_direction = pca953x_gpio_get_direction;
+ gc->get_multiple = pca953x_gpio_get_multiple;
gc->set_multiple = pca953x_gpio_set_multiple;
gc->set_config = pca953x_gpio_set_config;
gc->can_sleep = true;
--
2.17.1
Powered by blists - more mailing lists