[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200406173002.GC16885@pendragon.ideasonboard.com>
Date: Mon, 6 Apr 2020 20:30:02 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Cc: Sakari Ailus <sakari.ailus@...ux.intel.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Lad Prabhakar <prabhakar.csengg@...il.com>
Subject: Re: [PATCH v5 1/5] media: dt-bindings: media: i2c: Deprecate usage
of the clock-frequency property
Hi Prabhakar,
Thank you for the patch.
On Mon, Apr 06, 2020 at 05:42:37PM +0100, Lad Prabhakar wrote:
> OV5645 sensor supports input clock frequency ranging from 6MHz to 27MHz
> but the driver strictly expects this to be 24MHz (with tolerance of 1%)
> with this restrictions let the driver enforce the clock frequency
Maybe s/with/With/ ?
> internally to 24MHz rather then being passed as dt-property.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> ---
> Documentation/devicetree/bindings/media/i2c/ov5645.txt | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> index 72ad992f77be..a55bb728ea48 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> @@ -8,7 +8,6 @@ Required Properties:
> - compatible: Value should be "ovti,ov5645".
> - clocks: Reference to the xclk clock.
> - clock-names: Should be "xclk".
> -- clock-frequency: Frequency of the xclk clock.
> - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
> to the hardware pin PWDNB which is physically active low.
> - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
> @@ -37,7 +36,6 @@ Example:
>
> clocks = <&clks 200>;
> clock-names = "xclk";
> - clock-frequency = <24000000>;
>
> vdddo-supply = <&camera_dovdd_1v8>;
> vdda-supply = <&camera_avdd_2v8>;
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists