[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+V-a8sROBQpYvaP8TJ9fGYqOXT+uFsKhjnVBh0hZ2qS7yLQiQ@mail.gmail.com>
Date: Tue, 7 Apr 2020 08:35:02 +0100
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
linux-media <linux-media@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
LAK <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v5 1/5] media: dt-bindings: media: i2c: Deprecate usage of
the clock-frequency property
Hi Laurent,
Thank you for the review.
On Mon, Apr 6, 2020 at 6:30 PM Laurent Pinchart
<laurent.pinchart@...asonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Mon, Apr 06, 2020 at 05:42:37PM +0100, Lad Prabhakar wrote:
> > OV5645 sensor supports input clock frequency ranging from 6MHz to 27MHz
> > but the driver strictly expects this to be 24MHz (with tolerance of 1%)
> > with this restrictions let the driver enforce the clock frequency
>
> Maybe s/with/With/ ?
>
OK will fix it next version.
Cheers,
--Prabhakar
> > internally to 24MHz rather then being passed as dt-property.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
>
> > ---
> > Documentation/devicetree/bindings/media/i2c/ov5645.txt | 2 --
> > 1 file changed, 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > index 72ad992f77be..a55bb728ea48 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > @@ -8,7 +8,6 @@ Required Properties:
> > - compatible: Value should be "ovti,ov5645".
> > - clocks: Reference to the xclk clock.
> > - clock-names: Should be "xclk".
> > -- clock-frequency: Frequency of the xclk clock.
> > - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
> > to the hardware pin PWDNB which is physically active low.
> > - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
> > @@ -37,7 +36,6 @@ Example:
> >
> > clocks = <&clks 200>;
> > clock-names = "xclk";
> > - clock-frequency = <24000000>;
> >
> > vdddo-supply = <&camera_dovdd_1v8>;
> > vdda-supply = <&camera_avdd_2v8>;
>
> --
> Regards,
>
> Laurent Pinchart
Powered by blists - more mailing lists