linux-kernel - Re: [PATCH net-next v3] net: phy: micrel: add phy-mode support for the KSZ9031 PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2a04a3aa095c39ad165c7774dd0e92aa8fbd2cd4.camel@toradex.com>
Date:   Tue, 7 Apr 2020 12:34:04 +0000
From:   Philippe Schenker <philippe.schenker@...adex.com>
To:     "o.rempel@...gutronix.de" <o.rempel@...gutronix.de>,
        "mkl@...gutronix.de" <mkl@...gutronix.de>,
        "hkallweit1@...il.com" <hkallweit1@...il.com>,
        "f.fainelli@...il.com" <f.fainelli@...il.com>,
        "andrew@...n.ch" <andrew@...n.ch>
CC:     "linux@...linux.org.uk" <linux@...linux.org.uk>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "david@...tonic.nl" <david@...tonic.nl>,
        "davem@...emloft.net" <davem@...emloft.net>
Subject: Re: [PATCH net-next v3] net: phy: micrel: add phy-mode support for
 the KSZ9031 PHY

On Tue, 2020-04-07 at 13:02 +0200, Marc Kleine-Budde wrote:
> On 4/7/20 12:57 PM, Philippe Schenker wrote:
> > On Tue, 2020-04-07 at 11:36 +0200, Oleksij Rempel wrote:
> > > Add support for following phy-modes: rgmii, rgmii-id, rgmii-txid,
> > > rgmii-rxid.
> > > 
> > > This PHY has an internal RX delay of 1.2ns and no delay for TX.
> > > 
> > > The pad skew registers allow to set the total TX delay to max
> > > 1.38ns
> > > and
> > > the total RX delay to max of 2.58ns (configurable 1.38ns + build
> > > in
> > > 1.2ns) and a minimal delay of 0ns.
> > > 
> > > According to the RGMII v1.3 specification the delay provided by
> > > PCB
> > > traces
> > > should be between 1.5ns and 2.0ns. The RGMII v2.0 allows to
> > > provide
> > > this
> > > delay by MAC or PHY. So, we configure this PHY to the best values
> > > we
> > > can
> > > get by this HW: TX delay to 1.38ns (max supported value) and RX
> > > delay
> > > to
> > > 1.80ns (best calculated delay)
> > > 
> > > The phy-modes can still be fine tuned/overwritten by *-skew-ps
> > > device tree properties described in:
> > > Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
> > > 
> > > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > 
> > Make sure you do not exceet 80 chars with your phydev_warn. Besides
> > that:
> 
> Warning and Error strings should not be wrapped, so that you can
> better
> "grep" for them.

Didn't knew that, thanks!
> 
> regards,
> Marc
>