lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOGqxeVZpT2Li86kJSgw7D9hv76Knw8-aTAmq+T03nFf5Q1a4g@mail.gmail.com>
Date:   Wed, 8 Apr 2020 15:00:05 -0400
From:   Alan Cooper <alcooperx@...il.com>
To:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc:     ": Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>,
        Alan Stern <stern@...land.harvard.edu>,
        BCM Kernel Feedback <bcm-kernel-feedback-list@...adcom.com>,
        DTML <devicetree@...r.kernel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jonathan Neuschäfer <j.neuschaefer@....net>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        USB list <linux-usb@...r.kernel.org>,
        Mathias Nyman <mathias.nyman@...el.com>,
        Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH v3 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's

On Wed, Apr 8, 2020 at 2:25 PM Andy Shevchenko
<andriy.shevchenko@...ux.intel.com> wrote:
>
> On Wed, Apr 08, 2020 at 02:14:02PM -0400, Al Cooper wrote:
> > v3 - Addressed all of Andy Shevchenko's review comments for
> >      ehci-brcm.c.
> >    - Fixed the brcm,bcm7445-ehci.yaml dt-bindings document,
> >      dt_binding_check now passes.
> >    - Added the XHCI functionality to xhci-plat.c instead of creating
> >      new brcmstb files, as suggested by Mathias Nyman.
>
> It's nice, but have you heard what Mathias asked / proposed?

I thought that was what I did.

Al

...


>
> > v2 - Addressed Andy Shevchenko's review comments.
> >    - Fixed dt_binding_check error pointed out by Rob Herring.
> >    - Removed pr_info message in ehci_brcm_init as suggested by
> >      Greg Kroah-Hartman.
> >
> > This adds support for the XHCI, EHCI and OHCI host controllers found
> > in Broadcom STB SoC's. These drivers depend on getting access to the
> > new Broadcom STB USB PHY driver through a device-tree phandle and
> > will fail if the driver is not available.
> >
> > Al Cooper (4):
> >   dt-bindings: Add Broadcom STB USB support
> >   usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
> >   usb: ehci: Add new EHCI driver for Broadcom STB SoC's
> >   usb: host: Add ability to build new Broadcom STB USB drivers
> >
> >  .../bindings/usb/brcm,bcm7445-ehci.yaml       |  60 ++++
> >  .../devicetree/bindings/usb/usb-xhci.txt      |   1 +
> >  MAINTAINERS                                   |   8 +
> >  drivers/usb/host/Kconfig                      |  16 +
> >  drivers/usb/host/Makefile                     |  16 +-
> >  drivers/usb/host/ehci-brcm.c                  | 286 ++++++++++++++++++
> >  drivers/usb/host/xhci-plat.c                  |  10 +
> >  7 files changed, 391 insertions(+), 6 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
> >  create mode 100644 drivers/usb/host/ehci-brcm.c
> >
> > --
> > 2.17.1
> >
>
> --
> With Best Regards,
> Andy Shevchenko
>
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ