| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <OSAPR01MB3057C2FB967974B98B224610C8DE0@OSAPR01MB3057.jpnprd01.prod.outlook.com>
Date: Fri, 10 Apr 2020 01:03:11 +0000
From: Xiaojian Cao <xiaojian.cao@...alps.com>
To: Masaki Ota <masaki.ota@...salpine.com>,
Artem Borisov <dedsa2002@...il.com>
CC: "jikos@...nel.org" <jikos@...nel.org>,
Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Henrik Rydberg <rydberg@...math.org>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 2/2] HID: alps: Refactor axis resolution logic
Hi Ota-san,
Thanks for your checking.
In fact, some of the U1 devices work as non-PTP.
AUI1657 is using U1(KGDBCHA004A) whose firmware just supports mouse mode and legacy mode.
Best Regards,
----------------------------------------------
Jason Cao(曹晓建)
-----Original Message-----
From: 太田 真喜 Masaki Ota <masaki.ota@...salpine.com>
Sent: Friday, April 10, 2020 8:29 AM
To: 曹 曉建 Xiaojian Cao <xiaojian.cao@...alps.com>; Artem Borisov <dedsa2002@...il.com>
Cc: jikos@...nel.org; Benjamin Tissoires <benjamin.tissoires@...hat.com>; Henrik Rydberg <rydberg@...math.org>; linux-input@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: RE: [PATCH 2/2] HID: alps: Refactor axis resolution logic
Hi, Cao-san,
Do you know AUI1657 device? This device looks U1.
I think recent all U1 devices work as PTP.
Linux also supports PTP, so I think we should add something ID to Linux source code. (I remember a something flag is already exist.)
Best Regards,
Masaki Ota
-----Original Message-----
From: Artem Borisov <dedsa2002@...il.com>
Sent: Friday, April 10, 2020 8:00 AM
Cc: jikos@...nel.org; 太田 真喜 Masaki Ota <masaki.ota@...salpine.com>; Artem Borisov <dedsa2002@...il.com>; Benjamin Tissoires <benjamin.tissoires@...hat.com>; Henrik Rydberg <rydberg@...math.org>; linux-input@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] HID: alps: Refactor axis resolution logic
AUI1657 doesn't follow the same logic for resolution calculation, since the resulting values are incorrect. Instead, it reports the actual resolution values in place of the pitch ones.
While we're at it, also refactor the whole resolution logic to make it more generic and sensible for multiple device support.
There are two main logical problems with the current code:
1. active_len_mm values are only used for resolution calculation on U1, yet are exposed globally as part of alps_dev structure.
2. The resolution calculation process happens in alps_input_configured, while everything else is calculated in u1_init function.
These problems become more apparent when we try to support a device that doesn't follow the same resolution calculation logic as U1.
Since alps_input_configured is a device-agnostic function, we should avoid doing any measurements there and handle them in device-specific init functions like u1/T4_init instead.
To eliminate these problems we add global x_res and y_res values and populate them on a device-specific basis in the according init functions.
Signed-off-by: Artem Borisov <dedsa2002@...il.com>
---
drivers/hid/hid-alps.c | 41 +++++++++++++++++++++++++----------------
1 file changed, 25 insertions(+), 16 deletions(-)
diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c index c2a2bd528890..494c08cca645 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -83,8 +83,8 @@ enum dev_num {
* @max_fingers: total number of fingers
* @has_sp: boolean of sp existense
* @sp_btn_info: button information
- * @x_active_len_mm: active area length of X (mm)
- * @y_active_len_mm: active area length of Y (mm)
+ * @x_res: resolution of X
+ * @y_res: resolution of Y
* @x_max: maximum x coordinate value
* @y_max: maximum y coordinate value
* @x_min: minimum x coordinate value
@@ -100,9 +100,10 @@ struct alps_dev {
enum dev_num dev_type;
u8 max_fingers;
u8 has_sp;
+ u8 no_pitch;
u8 sp_btn_info;
- u32 x_active_len_mm;
- u32 y_active_len_mm;
+ u32 x_res;
+ u32 y_res;
u32 x_max;
u32 y_max;
u32 x_min;
@@ -550,10 +551,6 @@ static int u1_init(struct hid_device *hdev, struct alps_dev *pri_data)
dev_err(&hdev->dev, "failed U1_RESO_DWN_ABS (%d)\n", ret);
goto exit;
}
- pri_data->x_active_len_mm =
- (pitch_x * (sen_line_num_x - 1)) / 10;
- pri_data->y_active_len_mm =
- (pitch_y * (sen_line_num_y - 1)) / 10;
pri_data->x_max =
(resolution << 2) * (sen_line_num_x - 1); @@ -562,6 +559,18 @@ static int u1_init(struct hid_device *hdev, struct alps_dev *pri_data)
(resolution << 2) * (sen_line_num_y - 1);
pri_data->y_min = 1;
+ if (pri_data->no_pitch) {
+ pri_data->x_res = pitch_x;
+ pri_data->y_res = pitch_y;
+ } else {
+ pri_data->x_res =
+ (pri_data->x_max - 1) /
+ ((pitch_x * (sen_line_num_x - 1)) / 10);
+ pri_data->y_res =
+ (pri_data->y_max - 1) /
+ ((pitch_y * (sen_line_num_y - 1)) / 10);
+ }
+
ret = u1_read_write_register(hdev, ADDRESS_U1_PAD_BTN,
&tmp, 0, true);
if (ret < 0) {
@@ -622,7 +631,7 @@ static int T4_init(struct hid_device *hdev, struct alps_dev *pri_data)
pri_data->x_min = T4_COUNT_PER_ELECTRODE;
pri_data->y_max = sen_line_num_y * T4_COUNT_PER_ELECTRODE;
pri_data->y_min = T4_COUNT_PER_ELECTRODE;
- pri_data->x_active_len_mm = pri_data->y_active_len_mm = 0;
+ pri_data->x_res = pri_data->y_res = 0;
pri_data->btn_cnt = 1;
ret = t4_read_write_register(hdev, PRM_SYS_CONFIG_1, &tmp, 0, true); @@ -675,7 +684,7 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
struct alps_dev *data = hid_get_drvdata(hdev);
struct input_dev *input = hi->input, *input2;
int ret;
- int res_x, res_y, i;
+ int i;
data->input = input;
@@ -706,12 +715,9 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
input_set_abs_params(input, ABS_MT_POSITION_Y,
data->y_min, data->y_max, 0, 0);
- if (data->x_active_len_mm && data->y_active_len_mm) {
- res_x = (data->x_max - 1) / data->x_active_len_mm;
- res_y = (data->y_max - 1) / data->y_active_len_mm;
-
- input_abs_set_res(input, ABS_MT_POSITION_X, res_x);
- input_abs_set_res(input, ABS_MT_POSITION_Y, res_y);
+ if (data->x_res && data->y_res) {
+ input_abs_set_res(input, ABS_MT_POSITION_X, data->x_res);
+ input_abs_set_res(input, ABS_MT_POSITION_Y, data->y_res);
}
input_set_abs_params(input, ABS_MT_PRESSURE, 0, 64, 0, 0); @@ -802,8 +808,11 @@ static int alps_probe(struct hid_device *hdev, const struct hid_device_id *id)
break;
case HID_DEVICE_ID_ALPS_U1_DUAL:
case HID_DEVICE_ID_ALPS_U1:
+ data->dev_type = U1;
+ break;
case HID_DEVICE_ID_ALPS_1657:
data->dev_type = U1;
+ data->no_pitch = 1;
break;
default:
data->dev_type = UNKNOWN;
--
2.26.0
Powered by blists - more mailing lists