[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1586529114-25211-1-git-send-email-fabrice.gasnier@st.com>
Date: Fri, 10 Apr 2020 16:31:54 +0200
From: Fabrice Gasnier <fabrice.gasnier@...com>
To: <hminas@...opsys.com>
CC: <gregkh@...uxfoundation.org>, <balbi@...com>,
<johnyoun@...opsys.com>, <gregory.herrero@...el.com>,
<Grigor.Tovmasyan@...opsys.com>, <amelie.delaunay@...com>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>
Subject: [PATCH] usb: dwc2: only prevent new request when power_down is possible
When controller is suspended, registers mustn't be touched. This is not
the case when 'power_down' is set to none. In this case, power saving
routines are skipped.
This fixes a case where gadget driver (f_acm) gets opened (cat /dev/ttyGS0)
but the bus has been suspended by the host:
- configfs-gadget gadget: acm ttyGS0 can't notify serial state, -11
Fixes: 7ababa926c66 ("usb: dwc2: gadget: prevent new request submission during suspend")
Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
---
drivers/usb/dwc2/gadget.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 92ed32e..45a8782 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -1375,7 +1375,8 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
req->zero, req->short_not_ok);
/* Prevent new request submission when controller is suspended */
- if (hs->lx_state != DWC2_L0) {
+ if (hs->params.power_down != DWC2_POWER_DOWN_PARAM_NONE &&
+ hs->lx_state != DWC2_L0) {
dev_dbg(hs->dev, "%s: submit request only in active state\n",
__func__);
return -EAGAIN;
--
2.7.4
Powered by blists - more mailing lists